I have a column of the date of sales. (several hundred lines long) and each line has the name of the item sold. I need to complete a report showing how many sales of each item per date. Date of sale in one column and the name of the product in another.
View 3 Replies
I'd like to use two columns / labels to create a colorful bar chart that just piles each field value on top of each other and shows the amount (and percent of total if I can) along the first column's values next to the bar chart something like below..
So column 1 is the "entity name" and column 2 is the "value/amount".
I can't make this chart look right at all. I have Excel 2007.
I have a challenge trying to get excel to recognize yearly intervals.
Let me explain further:
Interval Percentage Yr1 Yr2 Yr3 Yr4 Yr5 Yr6 Yr7 Yr8 Yr9 Yr10 Yr11 Yr12
3yrs 10%
I want excel to insert the 10% into the cells every 3yrs.
I have attached a dummy workbook detailing my issue
Interval problem 1.xlsb
I am building a country ranking model which ranks several different macroeconomic indicators and applies a weighting to each of the indicators. I have an overall ranking column which is an average of all the ranks. The problem is whenever I change any of the individual indicator's weighting it obviously affects the country's overall ranking. Is there a way that the model can automatically "re-sort" the overall rankings without me having to manually click on the sort by smallest to largest filter each time?
PS I'm using Excel 2007.
I have written a 2007 workbook which contains 4 simple macros. One of the macros automates the process of saving the print range as a .pdf file. It works fine on my pc but when I send it to others to use, when they try the macros, they all return a 1004 runtime error.
View 6 Replies View RelatedWhat I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("A:A")) Is Nothing Then _
Target.Offset(0, 14).Value = Now
End If
End Sub
What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.
Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.
I am using Office 2007.
I've set up an email to be sent via a macro (excel 2007 and outlook) and I expanded the body of the message and it now comes up with an error "Compile error: invalid outside procedure"
It was working when I only had 4 lines and now it's not working.
strbody = "Hi," & vbNewLine &_
"abc." & vbNewLine &_
"def." & vbNewLine & vbNewLine & _
"ghi" & InputBox("Enter Response date (dd/mm/yyyy)") & vbNewLine & vbNewLine & _
"jlk." & vbNewLine & vbNewLine & _
"lmn" & vbNewLine & vbNewLine & _
"ABC" & vbNewLine & vbNewLine & _
"XYZ" & vbNewLine & _
[code]....
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
Excel 2007
A
B
C
D
E
F
1
Item Number
Description
Unit
Price
Qty
Total
2
BX-2B1324X
0.9% NaCL 1000ml Bags
CS
$23.52
5
$117.60
[Code] ....
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
Would like to add totals to stacked column chart in Excel 2007.
I have followed same steps listed here [url] but cannot position data labels above column.
Excel only gives me the options Center, Inside End, and Inside Base.
I also tried setting label position with VBA:
For Each co In ChartObjects
For Each s In co.Chart.SeriesCollection
If s. Name = "Totals" Then
For Each dl In s.DataLabels
dl.Position = xlLabelPositionOutsideEnd
Next dl
End If
Next s
Next co
Also tried the following without luck:
dl.Position = xlLabelPositionAbove
For each VBA example I get following error:
Run-time error '-2147467259 (80004005)':
Automation error
Unspecified error
It seems like Microsoft has removed this positioning option for stacked column charts because it works fine for normal column charts. Anyone find a way to do this otherwise?
I am using Excel 2010 and need to get the totals for each month transfered to a separate sheet. For example;
One sheet is called Outgoings (which has all the receipts entered chronologically in rows and apportioned in the columns) and the other sheet tracks the cost per month of each column.
I found a formula online and adapted it to this;
=SUMPRODUCT((Outgoings!$A$5:$A$1000>=41000)*(Outgoings!$A$5:$A$1000
I have two columns with total hours worked at different places and a grand total for both together in a third column.
I'm trying to sum the total hours for the week so far from Thursday till the following Wednesday for each week.
I want the wookbook to look up todays date and tell me what the total hours are for the current week
I'm using Excel 2003 - see the file attached
I am trying to write a vba code to change the zero values of the sheet to either 1, -1, or 0 according to certain rules. my sheet looks like this:
chcount=10chcount=10
0000
0000
0000
0000
1111
0000
1111
0000
0000
0000
0000
18111
0000
-1-1-1-1
0000
0000
0000
0000
-16-1-1-1
Basically I need the macro to select clusters of zeros in each of the columns with a label of 10 characters (this is an arbitrary number I chose when writing the macro), and if the values of the cells immediately above and below the cluster are the same, change the value of the zeros to the value of those cells, otherwise, the value of the custers remain as zero. So far I have the following code.
I've attached a sheet with details. I have references that I want to copy to a different cell but I want the reference to stay fixed AND allow the column to move.
Book1.xlsx
I'm trying to calculate the area of a Freeform shape.
Is this already stored somewhere e.g a shape property?
If not is there a macro available to do this?
I've got a spreadsheet that could have 1 of 3 possible print ranges:
PR1 = B2:K67
PR2 = B2:K132
PR3 = B2:K197
If there is a value greater than "0" in Cell B68, the print area would be PR2, but if there is a value greater than "0" in Cell B133, the print area would be PR3, otherwise it would be PR1.
These print ranges are such that the page break would would be below B67 and B132, but I'm concerned that I may need to set these page breaks in the Macro.
I'm not sure how to use the IF, THEN, ELSE, in the Macro to test the value of the cell and then set the print area.
can shut off the automatic calculation of a particluar worksheet or better yet, certain areas of a workbook, leaving the remainder of the workbook as Automatic?
For example, a workbook with Sheets 1,2,3 and 4. Can Excel 2007 be set for automatic calculations on the entire workbook except for Sheet3?
I have a table that lists staff according to where they are located, all adjusted using drop down lists, problem is that some locations have 5 staff and some up to 40, so when I set up a macro to print the area, those with 5 consultants look very small because the page area is so big. how can I adjust the print area dynamically so it only prints to 1 row below the last line with text?
View 9 Replies View Related'Get all the sheets
'y = 3
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "OM Files"
For J = 2 To Sheets.Count
With Sheets(J).UsedRange
x = Sheets(J).Name
If x "xxx" Then
.Resize(.Rows.Count).Copy _
Sheets(1).Range("A65536").End(xlUp)(3)
End If
End With
Next
Application.DisplayAlerts = False
When would the AREAS() Worksheet function be used? I've never seen it used and I've been Googling around to no avail.
View 9 Replies View RelatedI frequently receive workbooks containing up to 50 sheets and on most of them there is a selected area.
Is it possible to put a bit a code in the worbook when opening to clear all selected areas on all sheets.
I have an Excel sheet that I want to scroll up and down and I want an area in the upper right-hand corner to display static information. This information could change as more input into the sheet is performed, but it always must remain in the upper right-hand corner.
For example, let's assume the sheet has 200 rows to enter in a credit card application. There would be an area in the upper-right that would display information for some of the cells that were typed in. So as you type information, labels would display information from the form. I know that I can program the selection change event to re-position the box and labels, but if I scroll off the screen, the area does not stay there until I click on a cell on the page. I am using XL2003.
I have a userform that has two comboboxs on it. When the user clicks and selects an item in combobox 1 the code will highlight an area of cells that I set before. When the user clicks and selects an item in the combobox2 I need a piece of code that will highlight a second area of cells while still keeping the first areas of cells highlighted.
How I have it set up now if the combobox1.text = "Monday" then the cells B6:H20 are selected. But when the combox2 click event fires and selects another range of cells the first range selected by the combobox1 event is unselected. Is there a way to keep both areas selected?
I have been conducting seasonal characteristics of the availability of certain fruits and vegetables in the region I am in (Italy), now I want to compare the data from my first seasonal characteristics region (Texas). My goal is to see trends, view characteristics of climate in that given month in an easy view.
I have data for both lists containing over 50 vegetables / fruits each. Along with different side notes that show factors of each month like climate, availability, flavor profiles, and cooking techniques.
Is it possible to put it into format showing a 12 month period, (jan, feb, mar,......) and then putting the type of fruit/vegetable to see trends? along with adding the side notes...
I have locked print areas on 7 work sheets. I have successfully printed them at 1 time. However it appears as if the print areas have to be set again before I print them again? What's up.
View 2 Replies View RelatedI have seven printareas as follows:
$G$8:$Q$40 - Landscape
$C$42:$M$108 - Portrait
$O$42:$Y$108 - Portrait
$C$110:$M$157 - Landscape
$C$159:$M$206 - Landscape
$O$110:$Y157 - Landscape
$O$159:$Y$206 - Landscape
As you can see, when I go to print preview, I will want the first and the last four to be formatted landscape and the second and third to be formatted portrait. This is all I want the macro to do. Then later when I go to print, I want to be able to print them all together. Is there a way to do this? Perhaps by letting the first printarea be on its on sheet, the second two on their own sheet, and the final four on their own sheet?
i need to pull data from one spread sheet and place it in a new spread sheet. and i am not that familiar with macros i am learning but i need to get this done.
View 13 Replies View RelatedWhat is the benifit of the worksheet function AREAS?
How can we use it with other functions?
In making my label printer, I will need to set the print area for multiple sheets based on a range generated in a cell. E.g. Sheet1 might need cells A1:P1200 set as print area, Sheet2 might need cells A1:G694 set as the print area, Sheet3 might not need to be printed, etc..
I have no problem generating a formula to state what the print area for each sheet should be, respectively, but passing that info into VBA has me really stumped. (Using indirect in the Page Setup menu doesn't work after the value has changed, it changes the value to a static reference, which is bizarre). I suspect I'd want to use the Sub Workbook_BeforePrint, but I'm not 100% on that. I will generally have 3 or more specific sheets selected using a button-triggered macro that gets a cell value of sheet names and selects those sheets.
My code is below. See how I have repeated the same code over and over for each row. Is there a shorter way to write this, perhaps a cleaner way. Im not an expert and I write what I know and most of that is long code that can be shortened.
If MyScreen.Area(7, 2, 7, 4) = "102" Then
Workbooks(2).Worksheets(1). Range("B" & row) = "Yes"
ElseIf MyScreen.Area(8, 2, 8, 4) = "102" Then
Workbooks(2).Worksheets(1).Range("B" & row) = "Yes"
ElseIf MyScreen.Area(9, 2, 9, 4) = "102" Then
Workbooks(2).Worksheets(1).Range("B" & row) = "Yes"
ElseIf MyScreen.Area(10, 2, 10, 4) = "102" Then
Workbooks(2).Worksheets(1).Range("B" & row) = "Yes"
ElseIf MyScreen.Area(11, 2, 11, 4) = "102" Then
Workbooks(2).Worksheets(1).Range("B" & row) = "Yes"
ElseIf MyScreen.Area(12, 2, 12, 4) = "102" Then .....................
I am attempting to set a range of cells (say c5:h25) that can be scrolled through horizontally whilst the rest of the sheet remains frozen.
I'm trying to set this so the scrollable range will automatically expand horizontally as user data is added to the last (h etc) column.
