I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.
View 2 RepliesI currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.
Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub
I am trying to have the calendar in the second tab of the attached excel file to auto populate based on info in the first tab.
In the first tab, there is the start and end dates of certain projects. The calendar will need to only show the project name of every project being worked on that specific day.
Some days will have more than one project being worked on, the Calendar will just need to list them all under that day. The Start and End dates count as days the project being worked on as well. We will also need the calendar to auto update whenever we modify the dates in the first tab or add/remove projects (rows).
I'm using excel 2010 on a pc. I need to create a calender. So far I have been using the tutorial for the pop up calender. The result I'm looking for is to set up a specific time frame and have the calender provide the "due" date. I would like the due date to exclude weekends and holidays. Would I be able to do this with the pop up calender?
View 3 Replies View RelatedI've gotten the desired result in Column B, but this will not work going forward as we add to the table in columns E:G .
I'm looking to search between columns E:F, Identify the date-range where my dates in column A belong, and pull the corresponding rate from column G into column B.
Excel 2010
A
B
C
D
[Code]...
We have arrival dates and departure dates for guests and would like to figure out the number of meals needed on a particular date.
Named ranges: NumGuests _ArrivalDate _DepartureDate _CheckInTime _CheckOutTime
Need number of breakfasts
Number of Lunches
Number of Dinners for a given day of the week.
So if a guest is here say Jan 25 arriving after 9am, staying 2 nights they will have Lunch and Dinner on the 25th, BLD on the 26th and BL on the 27th. Since by default most arrive after 9 (miss breakfast), we can eliminate the checkin time for the breakfast calc and make the first one for the next day.
There might be other guests staying through that time period. The ******* would like to know how many meals they will need to prepare for the week.
Windows XP, Excel 2010
Using Excel 2007 Calendar Control:
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer
Insert
More Controls
Calendar Control 12.0
I have a column of dates formatted as:
20130201
The cell format in the column is General.
I need to change it so that the format looks like this:
02/01/2013
Is there a quick/easy way to do this in Excel 2010?
I have a user form that has a calendar button. Once clicked it updates a txtbox on my user form. What I would also like is for another txtbox (txtQtrLeave) to be auto populated based on this entry. Below is the code I've tried:
If CalendarEnd.Calendar1.Value > #3/31/2008# And CalendarEnd.Calendar1.Value < #1/6/2008# Then
Qtr = 1
frmAddClient.txtQtrLeave.Value = Qtr
... Qtr 2, 3 etc
It seems to return a value if I have one criteria but it doesn't work once I add the And element. What am I doing wrong (this has been driving me mad all morning)?
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change()
TextBox1.Value = DTPicker1.Value
End Sub
The initialize userform code uses the following to format and set the textbox
Code:
TextBox1.Value = Format(Date, "dd-mmm-yy")
TextBox1.Value = ""
Windows 7 with Excel 2010
I have a spreadsheet where we will be inserting the Arabic Hijri date taken from a Customs document (bayan). On my spreadsheet I'd like to have a column immediately next to the Hijri date that would convert the Hijri date to the Gregorian date so both dates will be visible for our Arabic and Western personnel who will be using the spreadsheet.
I am using Microsoft Excel 2010.
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI have a calendar in excel that looks like this:
January 20091234567891011February 200912345678
etc. for all days of the month, and all months of the year.
(The gold coloured cells are part of a formula I have somewhere else - no need to worry about them)
I was wondering - is there a way to get it so that whatever todays date is, the calendar will highlight the column a specific colour (e.g.) if the date was the 5th January, it would look like this:
January 20091234567891011February 200912345678
(Although not nescessarily that specific (and frankly pretty horrible) shade of green).
I have a list of all the HTML codes, palette numbers and hex codes for all the excel colours.
I'm using Excel 2003.
I select the date from drop down calendar in excel and linked with one cell. when i use the date in vlookup formula it does not work due to linked cell date format.
View 14 Replies View RelatedI have set up a calendar control on a userform and got it to pop up when selecting one of 3 cells on a worksheet. The various bits of code making this work are below.
This code is attached to the Userform.
VB:
Private Sub Calendar1_Click()
With ActiveCell
.Value = Calendar1.Value
[Code]....
What I am struggling with is that I'd like to have the calendar that pops up in cell C18 (which is Date of Birth) default to starting on 1st January 1987 not todays date. Also, if there is a value in either of the 3 cells that use the calendar, then I'd like the calendar to display that date. If the cell is empty then todays date is fine for cells G3 and G26.
I want a drop down calender to choose date from and found that i can use More Controls> "microsoft Date and Time Picker 6.0 (SP4)" for excel 2007 but it doesn't work with other excel and shows a "x" not recognised in some other machines.
View 1 Replies View RelatedI have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
I've just started working on an FTE calculator and wish to populate a 12 month calendar with FTE depending on the start and finshed dates.
FTE Calculator non nursing.xlsx
I've attached the file. In Column D the user would select the month the staff start and in the Column E the month the staff will finish. I would like the fte that is calculated in Column Z then to populate in the 12 columns AB:AM (Jul to Jun) with corresponding month start and finish.
Im designed a form in excel, which has a calendar date picker to select a desired delivery date for the user, which makes it easier to use for the user, than using a text box.
Ive searched a number of websites and so far havent seen what I need.
I want the calendar, once my form has been opened, to automatically change to the current date.
So in summary, the code, I believe would look something like this:
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies View Relatedi have a file that needs to have daily postings to it, I would like for it to automatically generate today's date and then if you change figure 1, it carries over to figure 2.
View 3 Replies View Relatedhow to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
I am using excel 2007. My issue is i have a front sheet that I want to list all my tasks due within five days of the day of the month the spreadhseet is opened.
All the tasks are on two different excel sheets though and one of them i update with different tasks 2-3 times a week.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I need to put date picker in excel 2010, the earlier doen't work.
View 5 Replies View RelatedLooking to create a calendar in excel and auto-populate the content with specific fields I enter. I know how to create an excel gantt chart but I'm really looking for a calendar view instead of a series of columns with dates. I reviewed the original post on Auto-Populating Excel Calendar but was confused by the instructions. (1) create a calendar in excel and (2) show me how to populate the calendar with fields like (dept and project name) into the dates on the calendar? I have two dates that are important (a due date for the project and when that project will be published). Is there a way to have both dates show info otherwise the most important date will be the publish date?
View 1 Replies View RelatedI just want to add it to my excel 2010. How can I add a date picker in my spreadsheet, when the cell contains a date format????
View 14 Replies View RelatedWhen I combine 3 reports (which we get out of a system) into 1 big file, the date format remains the same (mm/dd/yyyy and right alligned). Same happens for most of my colleagues.
When 1 particular colleague goes and combine these reports, I've noticed that some of the dates are showing as text? (dd/mm/yyyy and left alligned).
I have a userform which requires the user to enter the date a training course was completed. Initially I used DatePicker as I was running Excel 2010 and had that working, however the workbook I am creating will be used on about a dozen machines, all of which have different versions of Excel. To avoid needing calendar Add-ins to be downloaded and installed for this feature I decided to go the vba created calendar route. I am using one I found on this forum: [URL] .....
It works well for me using the example spreadsheet provided in the post but I am having some difficulty incorporating it into my code. I believe I have imported the appropriate forms and modules because I can get the date populate to the Label Box on my userform but when I try to put the Date into the spreadsheet along with other data such as name and course duration, the name and course duration populate but the date cell remains blank and execution completes without error.
I have tried playing around with the data type thinking I had some issue using the .Value attribute with a String but .Text gives me an error as does converting from String to Number format.
I will attach the workbook but for a quick look, the portion of the code I believe that is not working is in here:
[Code] .....
Training Classes Example Workbook.xlsm
I have a fairly large database in excel 2010 that in being updated everyday by a employee. In column A there are a set of dates all in the same format 9/1/2011 what i would like to happen is that if there are any dates in column A then it cut out the row and paste it into Sheet1 (the data is stored in sheet2).
View 6 Replies View Related