Configuring Dates: Enter A Date In One Column, Another Column Will Automatically Populate With The 1st Of The Next Month
May 8, 2009
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
I've just started working on an FTE calculator and wish to populate a 12 month calendar with FTE depending on the start and finshed dates.
FTE Calculator non nursing.xlsx
I've attached the file. In Column D the user would select the month the staff start and in the Column E the month the staff will finish. I would like the fte that is calculated in Column Z then to populate in the 12 columns AB:AM (Jul to Jun) with corresponding month start and finish.
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$A$2" Then
If Target = "January" Then ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _ xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
I want to enter any thing in column (A) and then the date & time automaticaly put in column (B) enter any thing in (A1), the date & time entered in (B1) automaticaly enter any thing in (A2), the date & time entered in (B2) automaticaly
How to set a column up to show it as the time of day but unless I enter PM after I put the time in the column it always comes up as AM.
Is there some way to just enter 9:09 in column d and or f and have it show up as pm? When I enter 8:10 in column b it automatically adds the AM to it but if I do the same in the column for the night and I do not type in pm it will automatically enter it as am.
I have attached the workbook and did delete the macro - which was just to clear all of my entries but when I click to open it again I am still getting the message about the macro.
In the workbook when I enter the time in column B I can just type in 7:14 and it will automatically add the AM to it. However, when I get to column D or F if I just type in 9:09 or whatever time it is in the evening it will automatically add AM to it unless I type 9:09 pm.
Is there some way to set it up so that I can just enter the time and it will automatically enter pm for everything in that column?
Column A is "Customer Number" Column B is "Date Can Opened" Column C is "Month" (currently blank except header row) Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
I am trying to find a formula that will automatically populate two columns on the same worksheet that a date is being entered in a different column. We train 468 new bus drivers every year and to accomplish this, we run 26 classes of 18 students with a new class starting every two weeks at our training facility. Each class is in training for six weeks (30 working days). The first 19 days they are under the instruction of our full-time instructors. The next nine days they are out on ‘line instruction’ with regular drivers. On days 29 and 30 they are back in the training department for final evaluation and graduation. On Day 31 they are turned over to Service Delivery as regular full-time drivers.
If I enter a class start date of April 6, 2009 in cell B4 on "2009 Conventional Classes", the formula would automatically fill in D4 and E4 columns with dates that are 29 days later and 31 days later respectively but, would skip weekends and any statutory holidays (these would be represented by a different background color on the calendar templates).
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5 Date Time In Time Out Hours Worked Pay 01/03/2000 01/04/2000 01/05/2000 . . 11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row. To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
Have have a excel spreadsheets with 2 columns. One with the employees name and one with the date that their warning expires. I would like the employees name to be automatically removed after the date expires. How do I do this.
I have a worksheet where I need to match the work items from Region A to Region B. If the work items match , then I need the formula to automatically populate the corresponding data in the next 3 columns as similar to Region A. I have tried searching the forum and but I could not work out the formula. I am not sure if the formula is Vlookup or INDEX/Match which both I am not well verse. I have attached a sample sheet.
I have a column of dates that are not being recognized as dates unless if I manually select each cell and press enter. For example the cell value is "Jul/13' and isn't recognized as "01/06/2013" until I select it and hit enter. How can I get around this?
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I'm working on more code to take data from hotel reports, compile totals and transfer data to several other workbooks. In prior instances, I'd been working with data that had been converted from Adobe .pdf format, so while the cell values appeared to be dates, they actually were text. I'd come up with a solution to find the first of each month in a column of dates and insert a row at that point. However, I'm now working on this with a system that actually outputs in Excel format. As such, the date column is actually normal date serial value, rather than text and my code doesn't work. What can I do to modify this snippet of code to find the first of each month and insert a row when the values in the column are actual date serials?
Here's the current code:
With Sheets("Sheet1") For RowToInsert = .UsedRange.Rows.Count To 14 Step -1 If (Range("A" & RowToInsert) Like "*/01/*") Then Rows(RowToInsert).EntireRow.Insert If (Range("A" & RowToInsert) Like TodayVisualMatrix) Then Rows(RowToInsert).EntireRow.Insert Range("A" & RowToInsert).Value = "Subtotal" End If Next RowToInsert End With
Row 3 doesn't find anything because while they appear in that format, the value of the cell isn't */01/*....
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January 01/01/2000: blank cell 08/01/2014: January 01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
is there a formula that will look at A2 and if the date in that column shows May 5, 2013, then in E2 it enters June 1, 2013? I would like E2 to automatically populate the first of the following month of A2.
I have a column say column B for example that has a list of dates in the format dd/mm/yyyy. I would like a summary at the top of the columns to state how many dates there are for the current month. But I wondered if this was possible based on the TODAY() function or similar. Thus the user would not have to change anything.
So for example at the start of the month it may state 14. Half way through the month down to 6 and at the end of the month 0 for example.
I have a sheet where I have a column of cells where I manually enter in a date. the format is d-mmm-yy. Before the end of the year rolled around I was able to enter in say only 12-31 and it would automatically change that to 12-dec-09, now when I do that it spits out 12-dec-10. It's not a big deal to type in the extra -09 to get it right but was wondering if there was a quick/easy fix to get it to know that I don't want a date in the future?
All dates I type in will be in the recent past...never more than 3 months or so old and never later than today's date.
From sheet1 on a checkbox click I am attempting to post the system date into sheet3 cell c3. If c3 already contains data then I want the cell selection to go down to the next row and post the date there. I if cell c3 has no data then it posts fine but if I need to goto the next row then I get a runtime error "object doesn't support this property or method".
If Me.GCN = True Then If Not IsEmpty(Worksheets("GCN_Paid").Range("c3")) Then Sheets(3).ActiveCell.Offset(1, 0).Select Sheets(3).Range("c3") = Date Else Sheets(3).Range("c3") = Date End If End If
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)). So now I just need it broken down by training type per month. How many x's in each column for February as an example.
I've asked this similar question on another message board (the Microsoft help community), but failed to follow-up quickly enough for the support I've come here to ask for. My situation involves a spreadsheet that is used to track days worked over the course of a week. I have the days of the week listed in one row (Sun - Sat) and in the row above, a place to put the day (i.e. - 3/28). I asked for help with a macro that would allow the user to place the date into any of the cells above the days of the week, check to ensure that the corresponding day of the week is correct, and if so, populate the other remaining empty dates automatically. Below is the macro that was kindly provided. It works perfectly as long as my data is in the referenced ranges (A1:G1, etc); however, my actual data is in range L6:R6 for the dates and L7:R7 for the day of the week. (example below). I've been able to pick apart the code to understand how to change most of the macro to accept input from the different range; however, I'm unable to comprehend what I'm missing to complete the modification.
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click() Dim my_name As String Dim r As Variant Dim l As Long sFind = DockDoorCal.Value If Trim(sFind) = "" Then Exit Sub
I've been using the following code to go the current date on a spreadsheet. I now have to add the current date somewhere else on the sheet How do I modify the following code to only have it look in A:A ? Date is formatted -- m/d/yyyy (1/2/2013)
HTML Code: Sub gotodateday() Dim C As Range Set C = Cells.Find(Date) If Not C Is Nothing Then C.Select End Sub
If I name ranges as Months, (Example: January_13. -- I can use the month without the year if it makes a difference),. How would I change it to look for the current month in A:A.