I am using Excel 2003. I get the above error and when I press debug, the issue highlighted is the following:
Code:
graff:
adde.TextBox6.Text = "ok"
shet = ActiveSheet.Name
Set CurrentChart = ActiveSheet.ChartObjects.Add(5, 20, 350, 200)
[Code].....
When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the
Private Sub Workbook_Open()
Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary")
With dic
For Each Dn In rng
If Not .exists(Dn.Value) Then
.Add Dn.Value, ""
End If
Next Dn
Set wksPayment = Sheet10
wksPayment.ListBox2.List = .keys
End With
End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingsDesktopCommercial Database"
.SearchSubFolders = True
.Filename = "*.*"
.TextOrProperty = "BANK"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
End If
End With
End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies View RelatedI am trying to use the Cells Property in VBA but it is not working and I cannot figure out why for the life of me. Below is my ....
View 9 Replies View RelatedI have a userform listbox2 that i am trying to save info from to a worksheet.
I am getting the error "Object doesn't support this poperty or method" when I am trying to set the cell of a find ......
Not sure if I am having a brain fade or not but the following code gives an ‘Object doesn’t support this action’ error (at the ‘with..’ line) and I can’t figure out why.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "D:"
.FileType = "*.*"
MsgBox (.FoundFiles.Count)
End With
End Sub
Rows keep changing so I have variables to keep track of various locations.
At this point:
tot_new_place equals 30
tot_new_cnt equals 51
I want to take the data in B30:H30 and copy, auto fill to B51:H51
I am receiving the error on this line of code:
Range("B" & tot_new_place & "").Select
Selection.AutoFill Destination:=Range("R" & tot_new_place & "C2:R" & tot_new_cnt & "C9"), Type:=xlFillDefault
I M Getting Run Time Error 1004 Method Range Of Object _ Worksheet Failed
Option Explicit
Private Sub cboPart_AfterUpdate()
'On Error Resume Next
[Code]...
While clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
View 5 Replies View RelatedI am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then
If Range("B3").Value = 0 Then
Columns("G:P").EntireColumn.Hidden = True
Else
If Range("B3").Value = 1 Then
Columns("H:P").EntireColumn.Hidden = True
[code]....
I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.
[URL]
I have a workbook in Excel that runs some code when it is opened [see below].
It works fine for everybody except one person using Excel 2003 - they get a Run-time error '5' : invalid procedure call or argument message and I cannot figure out why.
[Code] ......
When I execute this, I got error run-time error 445, object does not support this action. I am using window vista, microsoft office 2007. How can i change the code to make it workable?
View 2 Replies View RelatedI am using this code to open a form in Excel:
Code:
Private Sub Workbook_Open()
Form1.Show
End Sub
It has worked perfectly for about 2 weeks, well now when I go to open the workbook it gives me the debug error of Run Time error 424 Object Required. I last ran this today at about 8 a.m. no errors, but now about 4 hours later, it is bugging out. What is causing this?
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code:
Sub Send_to_Me()
' Send_to_Me Macro
Dim objTemp As Object
Dim FileExt As String
Dim TempFileName As String
Dim FileFullPath As String
Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
Why am I getting a runtime error on the following code:
Code:
If Target.Address = "$E$5" And Target.Value "" Then
Range("E5:G5").Copy
If Sheets("Sheet5").Range("F5").Value = "" Then
Sheets("Sheet5").Range("F5").PasteSpecial xlPasteValues
Else
Sheets("Sheet5").Cells(Rows.Count, "F").End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End If
End If
When I select only one cell it's ok but when I select multiple cell to delete it sends me a run-time error '13'.
Excel 2003, sheet is protected.
1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r
'
Dim OriginalSheet As Workbook
Set OriginalSheet = ActiveWorkbook
Columns("B:B").Cut
With Columns("A:A")
.Insert Shift:=xlToRight
End With
[code]....
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
Code:
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code]....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
When I am running a macro in excel 2003/windows 7 and trying to create a text file, it is giving this error. I am attaching two pictures.
View 1 Replies View RelatedI'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
I have a sub that I have copied out of a previous workbook where it still works fine. In the previous workbook it was assigned to a button. Now I am trying just to do it as an automatic action when the workbook is closed
It will lock any cell within the specified range that is not blank then protect the worksheet, save the workbook then save a dated archive copy
When I pasted it in to a new workbook I changed the range to A1:AP49 and strFileName
Now when I run it now I get an Error 1004 - Unable to set the Locked property of the Range class.
On Debug this line is highlighted:-
c.Locked = c.Value ""
The full code is:-
Private Sub Workbook_BeforeClose(Cancel As Boolean)
'
' Lock_cells Macro
' Macro compiled 10/26/2011 by G CARNCROSS
' Locks used cells, saves the workbook then saves a password protected copy with the days date in the file name then closes the workbook
'
'
ActiveSheet.Unprotect Password:="SHES"[code].....
When I try to populate a worksheet with the data from a multicolumn listbox on a userform.
I have references which list index is to go to which cell on the worksheet, however if there is no entry in this list index it is giving me this error.
As the listbox could have 1 line or up to 10 lines populated, I think I need to put an error handling on so that if the entry in listbox index is "" then resume next, or something like that. However everything I have tried doesn't work and I keep getting this error.
Here is the code I have to populate the worksheet from the listbox. There are 7 columns and 10 rows.
How to handle this error?
[CODE]
Private Sub cbPrint_click()
Call Error_Handling_VBA_On_Error_Resume_Next
Dim ws As Worksheet
Set ws = Worksheets("Invoice Copy")
With ws
.Range("B11") = CusName.Value
[Code] ......
This first macro works fine:
Sub UnhideHBPorCholesterolQ1toQ3()
'
ActiveSheet.Unprotect "password"
Rows("58:67").Select
[Code]....
why the second macro does not seem to work. I get a Run-time error that says "Unable to set the Hidden property of the Range Class".