how can i sum base on the Criteria in Columns G, in this sample the sum should be 67.
Sheet1ABCDEFG1V. GoodGoodFairBadN/AReported29853N/A8Bad31085328N/A410953N/A8Good510853N/A8Good61085378Good77853N/A8V. Good810853N/A8Good910753N/A8Reported108853N/A8Good11585308N/A1210653N/A8Good1367Excel 2010Worksheet FormulasCellFormulaG13=67
I have 2 lists (excel 2010) that I need to compare (they are currently 2 files, but I can combine them into 1 file with 2 worksheets) if it would be better.
The first list is of "All Students" at our college. The second list is those students who live "ON campus". I need a list of those students who live OFF campus.
The common denominator headers in both lists is: A1 Last Name A2 First Name
I would like to keep the "All Students" list as my master as it contains all the data I need such as addresses.
Ideally, I would like to create a macro or lookup or whatever that will take everyone from the "ON" list and remove them from the "ALL" list, leaving me with the data I need.
I have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
View 2 Replies View RelatedI'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:
Microsoft Excel 2010
Workbook Name: TASERR Model - 06-26-13.xlsm
In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.
I am using Excel 2010 on Windows 7. Here is a link to the worksheet I have a question about : Example.xlsx
The only two relevant sheets here are "TestScores" and "Area 1." What I am trying to do is copy names over from the TestScores sheet to the Area 1 sheet based their test scores. It is important to know that a passing score is anything 85 or above. If you don't pass Phase 1, you move onto Phase 2, and if you don't pass that you move onto Phase 3.
Let me first explain how the TestScores sheet works. Here is a screenshot of the sheet:
I copied in column C, the names, from a roster sheet. Columns A, B, and D all VLOOKUP information from the roster as well. You can ignore columns E & F. Column G is just a test name that is manually inserted. They are all in the same order since this is an example worksheet I am doing the program on before I input the real data. Column H is also manually inserted, with data validation to only allow values 0-100 and a few different relevant terms (MS, EXT ABS, N/E). These next two rows are the formulas in columns I and J, starting in row 3.
I=IF(H3="N/E","N/E",IF(H3="EXT ABS","EXT ABS",IF(H3="MS","MS",IF(H3="","",IF(H3>=85,"N/A (PASS)","Need")))))
J=IF(H3="N/E","N/E",IF(H3="EXT ABS","EXT ABS",IF(H3="MS","MS",IF(I3="","",IF(I3="Need","",IF(I3>=85,"N/A (PASS)","Need"))))))
What these formulas do is the following: If N/E, MS, or EXT ABS is in column H, it copies those over to the next two columns. If someone scores 84 or below, it says "Need" in the next column. If they score 85 or above, it says "N/A (PASS) in the next column(s). The user is meant to write over these to insert the phase 2 and 3 scores.
Here is the "Area 1" spreadsheet I am working on that has the problem.
First off, I created these formulas by comparing them to another post and replacing my ranges and criteria. In column A, it returns all the names of Team Members who passed in Phase 1 (have a score 85+ in "TestScores" column H). The array formula is below and it works great.
{=IFERROR(INDEX(TestScores!$C$3:$C$1500,SMALL(IF(TestScores!$H$3:$H$1500>=85,ROW(TestScores!$C$3:$C$1500)-ROW(TestScores!$C$3)+1),ROWS(A$6:A6))),"")}
In column E I have a similar formula, except it returns the names of those Team Members who have "Need" in column I of "TestScores." This formula also works great. The formula in column D is just a VLOOKUP based on column E and works well, too.
{=IFERROR(INDEX(TestScores!$C$3:$C$1500,SMALL(IF(TestScores!$I$3:$I$1500="Need",ROW(TestScores!$C$3:$C$1500)-ROW(TestScores!$C$3)+1),ROWS(E$6:E6))),"")}
Here is where my problem is. In column F, I want to return all the names of people who passed Phase 2, which means they have a score of 85 or above in column I of the "TestScores" sheet. However, not only is it not returning the right names, I can't even figure out what criteria the names is returns has. The current list, in (mostly, oops) red, is incorrect. The formula, below, is almost the same as the formulas above, with only 1 difference in each case.
=IFERROR(INDEX(TestScores!$C$3:$C$1500,SMALL(IF(TestScores!$I$3:$I$1500>=85,ROW(TestScores!$C$3:$C$1500)-ROW(TestScores!$C$3)+1),ROWS(F$6:F7))),"")
It refers to column I, instead of H, compared to the formula in column A. Its criteria is >=85 instead of ="Need", in comparison to the formula in column E. Nonetheless, it still isn't returning the right names! The other weird thing, is if I replace the ">=85" with "=90" it will return the names of team members who scored 90.
I would like to shade my cell yellow if the priority equals A or A-NEW and ACV=o.
In the data below, items 4 and 13 would be shaded yellow.
I am using Excel 2010.
Priority A, B, C
Consumer UPC
Item Description
ACV Weighted Distribution
[Code] .......
I'm trying to extract a list of names from an Excel 2010 table based on two criteria, thus:
=IFERROR(INDEX(Database[FullName],AGGREGATE(15,6,ROWS(Database[Age]-ROW('Database'!$A$2))/((Database[Age]>1.8)*(Database[Age]
I am using Excel 2010.
BTES worksheet:
acct# Oct-13 Nov-13 Dec-13
13245 850
12458 850
45864
12385 1500
MainList - F2= (current month)
Based on the current month (which I planned on typing in) on the MainList worksheet I need to count how many blank cells are in the table above. The information above is on a separate worksheet but I can change that in the formula. Every month gets a new column.
This is what I have but its not working correctly: =SUMPRODUCT(--(BTES!AD1:BQ18=F2),--(BTES!AD1:BQ18" "))
I am trying to write a macro in VBA excel 2010 that compares 2 sheets.
The macro should be something along the lines of if column 7 on sheet 1 = column 1 on sheet 2
AND
on that same row if column 6 on sheet 1 = column 3 on sheet 2
highlight green
** also on sheet1 there can be the same batch ID so if it is the same batch ID it needs to calculate the sum and look at that amount...
Sheet1:
settleid
min Tran Date
Payment Vehicle
total Deposit
total CF
total MRI
RMBATCHID
475-T
03/03/2014
Connect
$562.95
$19.95
$543.00
6G000001450835
[Code] .......
Results >
Sheet1:
settleid
min Tran Date
Payment Vehicle
total Deposit
total CF
total MRI
RMBATCHID
475-T
03/03/2014
Connect
$562.95
$19.95
$543.00
6G000001450835
[Code] ..........
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
I am creating a template in Excel 2010 and am having some issues due to a combination of positive and negative values. Specifically, I have a named range of values that can have either a positive or negative deviation from zero. I need to return the value that has the greatest deviation from zero (either + or -) based on criteria in another named range I have used the following array formula with success for the "Y" range:
{=IF(PRB=M1,INDEX(Y,MATCH(MAX(ABS(Y)),ABS(Y),0)),MAX(Y))}
However, if there are not any negative values, as in the "Z" range, it only returns MAX(Z) for the entire range, when I would like ti to return "0.00134" (the largest deviation from zero based on the PRB range criterai. Would this be better accomplished using VBA?
PRB
Y
Z
A90B90
A90B-90
[Code].....
I have a rolling 12 month (each day in column) tab in Excel 2010 that references variances by ID number in column A, and the column headers are each day for 366 days (2011). I would like to create a tab that shows the past 10 day's variances by ID number. I haven't been able to write a formula that will look at the date headers and the row ID number to return the figure for that day. Here is a sample of the 12 month rolling and the 10 days at a glance that I want to populate.
Rolling 12 Months
IDName12/25/201212/26/201212/27/201212/28/201212/29/2012and so on
1234Employee Name - - - - (11.07)
1235Employee Name - - - 0.20 -
1236Employee Name - - - - -
1237Employee Name - - - - (1.00)
[Code] .........
I have a fairly large database in excel 2010 that in being updated everyday by a employee. In column A there are a set of dates all in the same format 9/1/2011 what i would like to happen is that if there are any dates in column A then it cut out the row and paste it into Sheet1 (the data is stored in sheet2).
View 6 Replies View RelatedBasically; there are three main columns in the first worksheet (lets call it "Main Data"): OrderNumber, TaskName, SignOffDate with data listed as follows. The actual spreadsheet has hundreds of order numbers but i'll keep it simple and lets go with two.
OrderNumber
TaskName
SignOffDate
1
OED
01/05/2012
[Code] ........
What I am trying to do; is sort this data in a second worksheet (lets lable it "Output") so that the sign off dates for each task; for each order; are listed within 1 single row. Ie:
OrderNumber
OED
CTN
FAD6
RFS
1
01/05/2012
17/05/2012
22/05/2012
02/06/2012
2
03/05/2012
19/05/2012
27/05/2012
02/06/2012
There are many orders in the main data; and I'm not sure what to do exactly to return the sign off dates for each task for each order without creating separate worksheets for each task name; then using vlookups to find each date.
An order may have a sign off for all task names, or none at all. In addition to this; they may not always be in the same order as listed above.
I'm using Excel 2010.
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
I'm working in Excel 2010.
I setup a table with a column titled "Type". Each value under column "Type" defines the type of row it is: "Section", "SubSection", "SubSubSection"
I wish to create a set of conditional formatting rules that apply to data rows in this table, each rule controlling how cells within a whole row should be formatted, according to the value found in "Type", for that row.
Example:
Rule1: [@Type]="Section" -> fat red line on top of cell.
Rule2: [@Type]="SubSection" -> thin black line on top of cell.
Rule3: [@Type]="SubSubSection" -> dashed black line on top of cell.
I can't seem to make this work.
How can I leverage the nice column names, and the "@"-this row designator, within a table to create conditional formatting rules that apply to all the cells within a row, in the same way one can refer to in table formulas?
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
I have a spread sheet which totals the amounts in 2 columns D and E, which are pounds and pence. The formulas for each one are:
Pounds
=SUM(D3:D8)+ROUNDDOWN((SUM(E3:E8)/100),0)
Pence
=MOD(SUM(E3:E8),100)
These work very well and give me the correct figures.
What I would like to do is to add up the values of each row based on the criteria of column C and have just one value in ONE cell (as shown on lines 13 & 14), so for instance:
When added together the values of rows 3,4 & 6 are 7.25 (based on a value of "W")When added together the values of rows 7 & 8 are 5.00 (based on a value of "F")
I have tried to show this as an example in the image below:
A
B
C
D
E
[Code]....
I'm using Excel 2010 on Win 7 Pro.
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I am using lesson 33 of Excel VBA and Macros with Mr Excel as my guideline. The coding is as follows:
Dim WBO As Workbook 'original workbook
Dim WBN As Workbook 'individual data workbooks
Dim WSL As Worksheet 'List of files worksheet
Dim WSN As Worksheet
Set WBO = ThisWorkbook
Set WSL = WBO.Worksheets("List")
Set WSD = WBO.Worksheets("Data")
[Code] ......
I have indicated above with ( ) the beginning of my problem.
From the workbook with the list of workbooks to open, in each case I want to refer to a worksheet in each workbook
named "Report" and grab all the rows with data exept heading (rows 1 & 2) and 9 columns.
How do I get WSN in the code above to include the worksheet named "Report" or do I need different coding. Using Windows 7 & Excel 2010.
Is there a way to differentiate the number of unique and duplicate entries (considering multiple criterias) using a formula.
I am finding it hard to describe the request hence i have attached a spreadsheet for reference.
The first tab contains the data where I want the result in 'column J'
The second tab contains the metrics of how to calculate the result.
I am sure this will be difficult to understand at first hence feel free to ask as many questions you would like to [only related to the subject ]
For the record, I use Excel 2007 & 2010.
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
how to run some VBA code (written by someone else, unfortunately) only when clicking once in cell A1, and not run in any other cell. This is being run in Excel 2010. The code I would like to run in this manner is below, and currently will run when the user clicks on any cell in the worksheet it is applied.
[
Option Explicit_________________________________________
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'If IsDate(Target.Cells(1, 1).Value) Then
Set DatePickerForm.Target = Target.Cells(1, 1)
DatePickerForm.Show vbModal
Cancel = True
'End If
End Sub
]
How to total 2 different criteria from the same row?
Here is one option I was trying but does not work COUNTIF((E5:AT5,"D12")+(E5:AT5,"LD12"))/18
Basically I want Excel to count up the number of times the value "D12" and "LD12" occur in the range E5:AT5 and then divide that total by 18.
I have it working to count only the "D12" but am unsure how to have it count 2 different criteria. I am using version 2010.
I am using Excel 2010.I have a Advanced Filter that has removed 2 list, with 3 criterias, List ( or DB1 ) is based off 1 item " Pay type ( hourly / Salary )" , then the 2nd List is based off 2 Criteria's Job type , and Less than a number, I am able to do the filter just fine, but i am requried to DCOUNT theses.
here are the ranges for the Default Table: A6:H45 (without headers)
List1 is in J6:Q27
List2 is in J33:Q37
*Both are without headers also*
I am asked to "DCOUNT"
List 1 based (A6:H45,"Type",L30)
List 2 based (A6:H45,"Job Type"+"Salary(has to be
I am a total newb to excel and vb, and only have minimal experience in embedded C.
I have a very large spreadsheet with 9 columns and the max number of rows that excel supports (office 2010).
What I want to do is copy the entire row of data IF a cell in that row contains a specific string I'm interested in.
If it's necessary, the column that contains the values that would trigger a row copy would be column C and the data would be pasted onto a new sheet.
I need excel 2010 to automatically save at 09:30 and 19:45 every day monday-friday. Also need the file name saved to reflect the time and date it was saved - if possible.
My PC locks after 10 minutes of inactivity - unfortunately this has to happen because of where my PC is situated.