I am using excel 2013
I want a data validation drop down list, the list may expand or contract.
I created the list in cells on one sheet and control T to make them into a table
In data validation I selected the range of cells in that table
When I add to the list it does not show in the drop down list.
I'm trying to create a set of three dynamic/dependent drop down lists of date values, based on a set of imported data. Depending on whether the preferred choice is to list all dates in a range or just dates on the 15th, the available start and end drop down lists will change.
In addition, if possible I would then like to display a list of valid dates (not sure if this needs to be VBA).
The attached sheet shows/explains what I am attempting but here it is as well:
If B3 is set to show all dates in the month then:
the first dropdown option for C3 will be the first date of IMPORT (D2)
the first dropdown option for C4 will be the C3 value, to the last date in IMPORT (D) column
If B3 is set to show 15th of the month then:
the dropdown for C3 will be the first date of IMPORT (D) column with a date of 15th the dropdown for C4 will be in the range of C3 to the last date of IMPORT (D) column with a date of 15th only dates of 15th will be listed in both C3 and C4 dropdownlists
General
the dates in IMPORT column D are taken from IMPORT column A, B & C, which will be imported and will always be date sequential the number of rows of date entries will change with every import but there will never be any blank rows between dates the values in IMPORT columns A, B & C will always be numerical, and can be referenced if required [ideally] the LIST OF DATES will be populated with the date range, based on the option selected in B3
I'm fairly familiar with Excel (2010) and I have also done some VBA but I'm new to dynamic, nested dropdown lists and I'm unsure what the most practical way is to achieve this.
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies View RelatedI'm linking some data from 2 workbooks in the same folder (using excel 2013)
I have a main rota that works great, called "Main Rota.xlsm" I then have a separate basic file called Email Rota.xlsx without all of the bells and whistles of the Main Rota, purley made to email out to staff.
I store both files in the same folder "Site Rota" and it works fine.... until I rename the folder or move the folder to my laptop.
The link in the Email Rota looks like so to start (calling cell A3 from the Main Rota) ='[Main Rota.xlsm]Planning Rota'!A3
As I said it works fine until I move the folder onto my laptop the link then changes to
='D:DesktopSite Rota[Main Rota.xlsm]Planning Rota'!A3
And I have to keep updating the link, I have read online that it isn't supposed to work like this and its supposed to read the file "cleverly" in the same folder ?
I would ideally like to keep both files in the same folder and to update from visa versa without having to update the links if I move it from PC to laptop with I do daily .
I am using Excel 2013/365 on a Windows 7 OS. Recently (today) I added a command button to a worksheet, opened the properties window and tried to change the Backcolor property. When I clicked on the dropdown arrow no list appeared, it highlighted the default in the designated area. I then tried the Forecolor property - same response. I tried all the other dropdown arrows and they worked perfectly. To me I believe I may have inadvertently hit a key to disable these two color property dropdown arrows
View 1 Replies View RelatedI am using Excel 2013. I have an autofilter turned on for the columns in the spreadsheet. When I click on the filter button at the top of a column, the filter values do not have any check boxes next to them so I can't check any values. how to fix it so that it has checkboxes? I've attached a screen shot.
View 2 Replies View RelatedI have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies View RelatedIs there a Column Filter Drop down Keyboard Shortcut for Excel 2013?
In Excel 2013, is there a keyboard shortcut to access the column filter drop down. For example, if you are on the cell A1, and you select Filter under the data menu and you want to filter column A without using your mouse, is there a keyboard shortcut to do this. I know Alt-A-C, clears the filters, but I want to know if there is a shortcut to access the filters in the column. In case my explanation isn't clear, I have included some screenshot pictures of the filter, before and after it is selected, to show what I am talking about, and what I am trying to accomplish without the mouse.
column filter.PNG
Filter Dropdown.PNG
I have a successful dropdown menu that removes items that have already been selected through the dropdown list, however, I need it to be able to handle IDENTICAL items. At the moment, it can only handle unique items.
I'm trying to create a Rota Planner. I have a selection of shifts that need to be selected for each day. Some shifts are repeated (meaning that there may be 4 members of staff on the same shift). As ONE of each of the 4 shifts are selected, I then want only 3 to be displayed in the dropdown menu to be selected, until all of them have been selected.
I've tried to break apart the code that provides dynamic dropdown list for UNIQUE values but I'm tearing my hair out and getting nowhere.
Does excel 2013 have a fence way to sort a list of alpha numeric numbers and alphabetize in this order A - Z and then 0 - 9.
Ex) Apple, Greg, Rob, Sand, 123, 126, 1000, 2001
I need to create a 2-stage dependent drop down list.
Stage 1:
In cell G7 (on a tab called 'Data'), I have created a drop down list based on a range name called 'Region' .
Stage 2:
In cell G8, I need to create a drop down list which is dependent on the value chosen in G7.
Problem is, I will need to create a dynamic range name here which needs to vlookup or match the value from G7 in a dynamic list of data (the data is on different tab called 'RCA Data' and is spread over columns A:E with row A for headings - the data will go down an undetermined number of rows)
Every time the value in G7 matches a value in the 'RCA data' (the potential matches are stored in column
D) I need the corresponding cell value in column C to be added to the dynamic list. This list then needs to be available to choose from a drop down list in G8.
I have a spread sheet that has three sheets, PROJECTS - TIMES - LISTS Time sheet.xlsx PROJECTS contains a list of 'In Progress' and 'completed' projects for work, with relevant other data, I.e. PROJECT No. / STATUS etc This will grow to 1,000's of rows TIMES will contain the amount of time a person spends on a PROJECT on a daily basis. This will grow to 10,000's of rows LISTS contain basic validation list for the first 2 sheets.
Part A
I would like to have a validation drop down list for the PROJECT NO column in the TIMES sheet that only lists the PROJECT NO from the PROJECTS sheet where STATUS <> COMPLETED. I.e. I only want to display the PROJECT NO's for current projects.
Part B
Even though I only want the PROJECT NO used, can the drop down list also contain other column's data for reference information only before one is selected.
I have a complicated situation with Excel since I need a formula that can SUM data from the Pull 1 worksheet into the summary Sheet. I attached my sample for your reference because it is a bit complicated therefore I can not explain. It is better if you look at my Summary Sheet, need formula that can retrieve the same information.
Formula Test.xlsx
I have done all the computation and final output was in the form of tables with different solution sets in one worksheet in an excel.
From the dropdown list (List of solution models), when I select one solution set it should pick that particular workout and populate the final output table in the new worksheet in the same excel. Firstly, I need to establish dynamic linkage between the drop down list and final output tables and then push the final table to new worksheet based on the option selected.
I'm currently trying to set up a sheet ...
When setting up a Direct Debit There are 3 options, the 7th, 17th and 27th. I've put these into a drop down list. I need this list to be slightly dynamic. I must allow 10 working days from the date of the arrangment before I can apply the DD.
To explain further. If someone were to want to set up a DD and spoke to me today. If they then requested the DD be taken on the 7th, I wouldn't be able to set it up until the 7th of December as 10 working days are required. I'd like the list to reflect this. I can do it in OO with a simple if / switch but excel is a strange creature and I'm not sure how to approach the problem.
From that I think I also need to calculate the number of weeks remaining in the current financial year. I think I should be able to do this by using the Today() function and some maths.
I have a list of dates and want to convert them to something like Monday 21st October instead of 21/10/13.
I am sure this is easy but cannot see how to do it. I am on Excel 13.
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
------ A ------------------- B
John123@gmail.com--------Blue
Bill323@gmail.com ---------Red
Sue223@gmail.com -------Green
Sue223@gmail.com -------Yellow
Bill323@gmail.com ---------Red
Bill323@gmail.com --------Yellow
John123@gmail.com ------Yellow
Sue223@gmail.com --------Blue
- C --------------- D ---
John ------------Blue, Yellow
Bill --------------Red, Yellow
Sue------------Green, Yellow, Blue
I am using Excel 2013 on Windows 7. In the above example columns A & B is the given list to process, and Columns C & D contain the result I am trying to achieve. The major part of this that I am having trouble on combining, separating them with commas in another cell, and ignoring a duplicate value. You can see bill has two red values, but I only need it displayed once in column D.
i want to make a dropdown list from excel 2007. I try data validation then allow then list then source but i cannot make the sheet 2 as the source of my dropdown list in sheet 1. i uses excel 2007 and my OS is XP.
View 4 Replies View RelatedI have cells containing large drop down lists (offering many possible entries). Is it possible to get excel to "jump" in the list or complete the entry automatically? If i start typing "aut", it should the drop down entry "automation". For your information, I just use Define Name and Data Validation to create the drop down list. Is it must be using VBA code or I just can use Define Name and Data Validation which has been I created?
View 5 Replies View RelatedMy Excel 2007 has "auto complete with a drop down list". When I type in the first character, a drop down list appears listing all the entries in that column tha start with that character. I click on one of the entries and the cell is "auto completed" with that entry. Sure is handy. I try to find that functionally in Excell at work, Office Professional 2010, and no bueno for kaki.
View 3 Replies View RelatedI have some data validation drop down lists in excel, I can tab through all the lists but I have to press alt + down arrow to show the list, Is their a way it can be automatically shown as soon as I focus on the tab.
Check the attachment: Survey.xlsx
i have a dropdown list called SN (for serial numbers). items are abc001-abc100. i would like to remove an item once ive selected it. i.e. if i have chosen abc001 on the first row, when i go to the next row and open the dropdown list, abc001 should not be there anymore. this is for me to avoid duplicate listing of the items.
View 2 Replies View RelatedI am using windows 7, excel 2010 I have a work book, my price list is sheet one and my list of customers and what discounts they get per item in sheet 2.
I choose customer on sheet 1, say i choose a & L sales, well on sheet 2 it shows they get a discount of 45 percent. so I want the 45 percent to show in cell 4r on sheet one, but if the dropdown box shows customer a & V it should show 35 percent because that is what it is on sheet two in cell 3c.
sheet two has 158 customers and each get a difference discount for that product
I'm using Microsoft Excel for Mac 2011. I'm creating a drop down box from List within Data Validation. It's only letting my create a list of 17 names. My longest list is 63 names. What do I need to do to create a list that will support that?
View 3 Replies View RelatedI am trying to make an excel sheet which has a 2 column drop down. For example I want to have a drop down list in column 1 and when I select "Item A" in column 2 "item A" 's phone number appears. If i select "item B" form the drop down this, "Item B's" phone number would also appear in column 2 and so on. how this is done (if possible) on Excel 2007? I was hoping it could be done from one workbook to another but If it is easier from one worksheet to another then that is fine too.
View 5 Replies View RelatedCreating a spreadsheet in Excel 2010 and am creating the dropdowns from a separate sheet in the workbook. There are no spaces and I don't know why I keep getting the "The Source currently evaluates to an error."
I am entering the Data Validation to reference the first cell I need "=INDIRECT(H3)"
I have put the spreadsheet on dropbox. When you select the "Sequencing Platform" drop down, it need to give just the dropdown for the platform selected.
[Code] ..........
So, I need to figure out how to make the populated contents of a single dropdown box dependent upon the selected results in two other drop downs.
As there are ~35K lines in the sheet, creating Lists is impractical, and VBA is out due to client security settings.
My data sort order is: Region Name > Area # > Facility Name
I have a drop down to select the Region I want to work in.
The drop-down for Area # populates based on the selection from Region Name.
The hang-up is that the area numbers are 1-4 for each Region.
So, I can't simply populate another drop-down for Facility from the result from Area #, but it has to be based upon the results of both of the former results.
How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12
Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
so I have to use a formula to do this.
Using Excel 2010
See attached sample
Sample.xlsm
I am looking to insert a drop down box in Excel 2010 which will allow users to select multiple items. At the moment I have data validation drop down lists in other columns, however I need one column to allow for multiple selections.
Basically I have a drop down which allows for a region to be selected, my next drop down (in the next column) I need to allow users to either select "ALL", or multiple countries which fall within the region selected previously. I need a check box so that users can select multiple countries, and deselect if an incorrect country is selected in error.