I need to place a date and time in a cell 14/9/2013 6:00 PM
Tried several formats under custom format without success.
Also need addition to following macro to enable it to start on opening of workbook
Code:
Sub Macro1()
Do
PauseTime = 1 ' Set duration.
Start = Timer ' Set start time.
Do While Timer < Start + PauseTime
DoEvents ' Yield to other processes.
[Code]...
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I just installed Office 2013 Pro. In my Office 2010 Additional Controls toolbox, the control toolbox has a Date and Time Picker(DTPicker1) . I cannot find it in the Additional Controls toolbox in Excel 2013. I certainly hope they did not choose to not make it available in Excel 2013 - this is an extremely important control for my Excel spreadsheets as it allows inputting a date range on a userform with DTPicker1 and DTPicker2 and generating reports using VBA in conjunction with Autofiltering code on a Generate Report button.
View 8 Replies View RelatedI am using excel 2013. I have the table look like the above, in the diagram 1, i want to have the macro such that it can be formatted to the 2nd diagram. Can this be done using macro ? [URL]
View 2 Replies View RelatedI received a few 1-3gb xml files from the government and I would like to open them in an Excel format. I have tried opening them using Excel 2013 (both as an xml table and as a read only workbook) with a machine running 8gb RAM and a 3.4 ghz i5 processor. I left it running overnight but Excel continues to "not respond". The file is intended to display thousands of line items with around 40-50 columns of data. For previous (and much smaller) similar files, the saved workbook is a manageable file. The only hurdle here is getting these open.
View 5 Replies View RelatedWith excel 2013 you're now able to open multiple windows or views of the same workbook. However when a workbook is saved with multiple windows open, the next user to open the spreadsheet will also open it with multiple windows. Which can be very annoying when most people work off of one window vs. multiple. Is there a way to disable saving the multiple windows or a macro to force open excel in 1 window?
View 2 Replies View RelatedI think there's a way to use Excel to automatically create a 5-day calendar. Maybe a macro?
The date format must be dd/mm/yyyy hh:mm and it must be in text format. If its June 9, 2012 at 6pm - the correct format is: 12/06/2012 18:00
I want to post 5 times a day: 09:05, 9:55, 10:45, 16:55 and 18:00.
Column A is where the date and time goes. Ideally, I'd enter in A1 the start date and then run a macro that would automatically populate the next 5 consecutive days with the specific times above (so 25 rows total in column A).
I have to save the file as a csv file, so the date and time format has to be in text or I'll get an upload error in Hootsuite.
I'm trying to print an excel workbook in a particular format. I have several sheets. I would like the information on each sheet to be duplicated directly to the right of the info, on the same printed sheet in Landscape layout. After printing, I need to be able to stack the workbook and cut straight down the middle. This way, I have two identical workbooks with identical margins, perfectly centered.
Is there an easy way to do this without copying and pasting the cell data into the spreadsheet as well?
If there is not, and I must have duplicate tables on the same worksheet, is there an easy way to format the printing so that they print out perfectly aligned?
I've tried to use the ruler function in the print page to stretch, but, it only stretches a particular row/column.
I have a spreadsheet that keeps track of the equipment we have on rent. Whenever we have a new rental, I insert a row and enter the information. I have several conditional formats I am applying - (1) making the font a light grey so that it is hard to see on any rental that has been called off, but invoicing isn't complete on, (2) making the font red on any item that is within 3 days of the term, and highlighting any row that isn't showing an invoice in over 45 days. When anything is completed (rental has been called off, and the final invoice has been approved), I cut the row out and put it in a sheet entitled "Closed Equipment". When I cut out closed records or add new records, it will occasionally mess up my conditional formatting by only referencing one row. Additionally, I don't want the conditional formatting to transfer over to the "Closed Equipment" tab.
Would this be easier to keep clean and straight if I used VBA? Or should I just continue to occasionally check my conditional formatting and clean it up? I thought if I used a Named Range instead of cell references, it might work better, but entering named range "On_Rent" converts to the cell range ($A$4:$AA$194).
I am using Windows 8, Excel 2013. The file is on a network drive, and others in the office can look at it (they all run Windows 7, and either Excel 2010 or 2007), but they look at it so seldom.
We have 3 PCs, all running MS Office 2013. On 1 of these machines, it is doing strange things with formatting. If you open a document or try to paste anything into certain documents, it decides everything is currency format and assigns all sorts of wrong formatting to the entire sheet, or the entire document. There may be some cells in the doc that are indeed currency, but only a small proprtion. If I open a new, fresh document and paste into that document, it does not do this, it seems to work normally, only applying currency formatting where it might be applicable. On some larger docs that have this issue, no matter what I do, it just continues to apply these strange settings.
View 2 Replies View RelatedI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedOn opening of an excel document is it possible to have a date in a cell that will continuously update. =now() enters the date required but if i was to go into the sheet days or whatever later is there a way that this will update automatically??
View 3 Replies View RelatedI am having problems to read a number inside a .txt file.
I use this code to open a .txt
Workbooks.OpenText filename:=data_DMC_filename _
, Origin:=xlWindows, StartRow:=1, DataType:=xlDelimited, ConsecutiveDelimiter:=False, Tab:=True, Semicolon:= _
False, Comma:=False, Space:=False, Other:=False, FieldInfo:=Array(Array _
(1, 1), Array(2, 1)), DecimalSeparator:=",", ThousandsSeparator:=".", _
TrailingMinusNumbers:=True
At original file the number is like this format: 003791689000011403700010, but after opening as workbook it is like this 3,7917E+21
I tried changing the forma to text with this code bellow, but it looses information
Selection.NumberFormat = "0"
and the result is: 3791689000011400000000
I already wrote a lot of my code for other values, using this Workbooks.OpenText command, opening as workbook so I would not like to open the file in text format or so...
I need to set the dates on a tracking sheet to turn red after that date passes, I have tried using conditional formatting - Highlight cell rules - Greater than, but this hasn't worked.
It is excel 2013,
I have a big spreadsheet with IT / Finance data. Below is the formula, I currently have. I am summing column Y in Tab Savings Data Detail, where column A does not equal Parent, and The Value in Column AK on the Savings data details tab matches the value in current tab for cell B26 and where column G on the savings detail tab equals Transition to IT. I am adding that value to the second sumifs statement essentially the values in column X on the savings detail tab with the same criteria.
Now I need to add to each of these formulas. I need to sum only the values where the date value in column W on the data details tab is greater than or equal to 01/01/2013 and less than or equal to 12/31/2013
find the easiest way?
=SUMIFS('savings data details'!$Y:$Y,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")+
SUMIFS('savings data details'!$X:$X,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")
Looking to add automatic date stamp to a column of cells each time their corresponding row or specific cell in that row is modified.
I'm using Excel 2013.
I am rather new to excel and currently using excel 2013.
I have a worksheet with column A ( data group) Column B ( Sent date with MM/DD/YY) , Column C Aged Group {using this formula =IF(B2="","",(TODAY()-B2))} , Column D status ( if the record is open or close).
I would like to create a table that can segregate the data group and how many days it has already aged. And then group them with different aged group. Refer to the attached screenshot.
From:-
Data GroupSent Date AgedStatus
Quotation 06/06/1435Open
Invoice 07/11/140Open
invoice 05/01/1471Open
PO 07/01/1410Open
PO 07/05/146Open
SO 06/30/1411Open
Quotation 05/18/1454Open
SO 05/05/1467Open
Cash Note 07/03/148Close
To:-
Data Group0-15 15-3030 above
Quotation
Invoice
PO
SO
Cash Note
testtest.xlsx
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I'm having trouble getting the dates i want on the horizontal axis on a chart in Excel 2013. I want 12 dates along the axis starting at 01/01/2013 then each month until 1/12/13 however as you can see the dates are 01/01/1900.
View 10 Replies View RelatedIs there a formula which places the date In A5 whenever text is entered in A2 - Excel 2013
View 9 Replies View RelatedI have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies View RelatedI have a file that has the Date and Time combined into one cell. I want to separate the two, and cannot find anywhere on the net to do so!
This is the cells format:
d/mm/yyyy h:mm
Cells look like this:
28/05/2008 12:30
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View RelatedHere is a very simple workbook/sheet with some simple date arithmetic.
I keep getting the warning that there's a circular reference in C2.
Either I need to suppress the warning so vba loops can run or PREFERABLY I'd get rid of the "circular reference".
Run with Excel 2013.
I am working with DatePicker calendar. I have two userform with date entries. In one userform I will have 2 textbox to enter dates. In the other one I will have 4 dates to enter. I used to have Excel 2007 with Calendar Control and used to work fine but had to make multiple calendar to control individual Textbox in multiple Userforms.
I am looking for a way to, If a userform is selected to trigger only the textbox name that is within that userform. If I add more entries the code adds automatically the date from the previous userform in the next one.
[Code].....
I was thinking that this would work but it still adds the date to my frmdashboard userform if I am in my frmdata userform.
Is there a way to trigger only the userform that I am currently in?
Using Excel 2013.
Note: I also have a "Clear All" VB Code that will delete every entry in my userform on Initiate but I am looking to not go this path.
I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30
After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
I'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format.
Is there a function or vba code that I can use in excel to convert the normal time format to epoch time?
I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I have a list of dates stored via the following :
20100101 how can I convert this to date/time format to show 01/01/2010?