Excel 2013 :: Placing Date Value To 3 Different Groups
Jul 11, 2014
I am rather new to excel and currently using excel 2013.
I have a worksheet with column A ( data group) Column B ( Sent date with MM/DD/YY) , Column C Aged Group {using this formula =IF(B2="","",(TODAY()-B2))} , Column D status ( if the record is open or close).
I would like to create a table that can segregate the data group and how many days it has already aged. And then group them with different aged group. Refer to the attached screenshot.
From:-
Data GroupSent Date AgedStatus
Quotation 06/06/1435Open
Invoice 07/11/140Open
invoice 05/01/1471Open
PO 07/01/1410Open
PO 07/05/146Open
SO 06/30/1411Open
Quotation 05/18/1454Open
SO 05/05/1467Open
Cash Note 07/03/148Close
To:-
Data Group0-15 15-3030 above
Quotation
Invoice
PO
SO
Cash Note
I have several option groups (Y & N in each) linked to cells to display TRUE / FALSE depending on which option is selected in each group. I have another cell which I want to apply conditional formatting to if EITHER Y or N is selected in all groups. At present I use COUNTIF to check for FALSE=0 in the linked cells which works if all the answers are Y. How do I apply CF if there is a mixture of Y & N (TRUE / FALSE) in all groups (I'm not sure if I've explained that well or not).
I need to set the dates on a tracking sheet to turn red after that date passes, I have tried using conditional formatting - Highlight cell rules - Greater than, but this hasn't worked.
I have a big spreadsheet with IT / Finance data. Below is the formula, I currently have. I am summing column Y in Tab Savings Data Detail, where column A does not equal Parent, and The Value in Column AK on the Savings data details tab matches the value in current tab for cell B26 and where column G on the savings detail tab equals Transition to IT. I am adding that value to the second sumifs statement essentially the values in column X on the savings detail tab with the same criteria.
Now I need to add to each of these formulas. I need to sum only the values where the date value in column W on the data details tab is greater than or equal to 01/01/2013 and less than or equal to 12/31/2013
find the easiest way?
=SUMIFS('savings data details'!$Y:$Y,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")+ SUMIFS('savings data details'!$X:$X,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")
I'm having trouble getting the dates i want on the horizontal axis on a chart in Excel 2013. I want 12 dates along the axis starting at 01/01/2013 then each month until 1/12/13 however as you can see the dates are 01/01/1900.
I just installed Office 2013 Pro. In my Office 2010 Additional Controls toolbox, the control toolbox has a Date and Time Picker(DTPicker1) . I cannot find it in the Additional Controls toolbox in Excel 2013. I certainly hope they did not choose to not make it available in Excel 2013 - this is an extremely important control for my Excel spreadsheets as it allows inputting a date range on a userform with DTPicker1 and DTPicker2 and generating reports using VBA in conjunction with Autofiltering code on a Generate Report button.
I am working with DatePicker calendar. I have two userform with date entries. In one userform I will have 2 textbox to enter dates. In the other one I will have 4 dates to enter. I used to have Excel 2007 with Calendar Control and used to work fine but had to make multiple calendar to control individual Textbox in multiple Userforms.
I am looking for a way to, If a userform is selected to trigger only the textbox name that is within that userform. If I add more entries the code adds automatically the date from the previous userform in the next one.
[Code].....
I was thinking that this would work but it still adds the date to my frmdashboard userform if I am in my frmdata userform.
Is there a way to trigger only the userform that I am currently in?
Using Excel 2013.
Note: I also have a "Clear All" VB Code that will delete every entry in my userform on Initiate but I am looking to not go this path.
Placing the date (1-JAN-2008) in the right column for DAY
Now I have a Matrix in which I have the Days as Colum Headings and the Week Numbers as the Rows.
I will be mentioning the Date let's say 1-JAN-2008 in the Cell A1 and I want this date to appear in the approriate Column for the DAY For Ex:-
The day for the date 1-Jan-08 was a Tuesday, therefore the date should appear in the Column having a Heading Tuesday and in the Column Monday it should show as 31-Dec-07 and the Columns for Wednesday,Thursday,Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-08, 3-Jan-08, 4-Jan-08, 5-Jan-08, 6-Jan-08).
The appearance of the Date should change as per the day-date combination and as such for the preceding as well as following dates..
Ex:- Lets say for 1-Jan-09 which comes on a Thursday it should display (1-Jan-09) under column Thu and Mon,Tue,Wed should display ( 29-Dec-08,30-Dec-08,31-Dec-08) and Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-09, 3-Jan-09, 4-Jan-09).
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
We updated excel from 2003 -> 2010 and this stopped working.
We have a macro which takes pictures from a folder and pastes those pictures in the excel -sheet.
At 2003 the pictures were correctly pasted to their positions, but at 2010 the pictures appear in somewhere at the same sheet. (not at the right places, which should be at column "o" at the same row.)
Macro (working correctly at 2003) :
Sub Kuvan_piirto(ic As Integer) On Error GoTo loppu
I'm trying to make a excel template that will take a list of names, changes but generally around 100, and randomly separate them into 4 sets of 8 groups evenly.
This grouping would be repeated 4 times, but there are some conditions.
Firstly, the same person cannot be put into a group again with someone they have previously been grouped with. Secondly, someone appearing in the first or last groups cannot appear in that group again.
I've been trying to do it via some complex cell formulas but they are quickly becoming overly complex and im not sure if it will actually work which has completely demotivated me. Ive not been looking at VBA but am now thinking its the right route. Ive been thinking of having a master list and then have an attribute of who people have been grouped with before during each of the groupings, and also what number group they were in and then checking against that or something, but im not sure if that is the most efficient solution.
I attached an example dataset : demo dataset.xlsx
There is a one-to-one relationship between Column A and B, but B is not unique (but can only take a small set of valid values). I wish to query how many id's (Column A) contain a particular property (Column B). If the example above ended before the "...", I would like to get as the output:
Code: 566 2 341 1
because the property 566 is owned by two id's (1 and 3) and the property 341 is only owned by the id 2.
My and a work college needed to combine our separate excel worksheets into a single document.
Office 2013 didn't have a function to "import sheet from file" so we used open office to import my .xlsx worksheets.
After we finished importing we exported the final workbook as .xls (so I could open it).
After opening the workbook on my pc (excel 2013) i notice some of the sheets no longer have column headers, but the row headings still exists. (No ABCD, only 1234)
Also I am unable to use features such as "Freeze Pane"
I suspect this was caused by importing and exporting through open office?
I currently have a workbook that has VBA functions that calculates values by looping through large amounts of data in a few large excel sheets. I want to transfer the data from these sheets into Access and then bring data into the VBA code via an array from the data in Access rather than the array being populated from the data in excel as it currently is. How to create the connection. The access DB will be situated in a public directory on a server. How to create the connection string and then how I call the data from Access? I have just downloaded Office 2013.
I have a complicated spreadsheet with several columns. Some columns B, D, E, F, M come from calculations on other columns or are columns copied from other worksheets within the same workbook.
I have another column C which is generated entirely off a macro with no input from the user.
I insert a row at line 8 (see above). However its just a blankrow and the formula highlighted in E2 does not show in E8 but it does appear for E9. I'd need that formula to be in E8.
My dilemma is how to insert a row and have it copy the formula from too.
I'd like to avoid copying another row into it and editing data. Other thing to avoid is putting all new rows at the end of the spreadsheet if possible. Has to be in the middle of the existing table.
