I just installed Office 2013 Pro. In my Office 2010 Additional Controls toolbox, the control toolbox has a Date and Time Picker(DTPicker1) . I cannot find it in the Additional Controls toolbox in Excel 2013. I certainly hope they did not choose to not make it available in Excel 2013 - this is an extremely important control for my Excel spreadsheets as it allows inputting a date range on a userform with DTPicker1 and DTPicker2 and generating reports using VBA in conjunction with Autofiltering code on a Generate Report button.
I want a drop down calender to choose date from and found that i can use More Controls> "microsoft Date and Time Picker 6.0 (SP4)" for excel 2007 but it doesn't work with other excel and shows a "x" not recognised in some other machines.
I am trying to add a calendar picker to Excel 2010. Everything I read online says that it is possible, you just need to use the ActiveX control "Microsoft Date and Time Picker Control 6.0", and that it should be listed under Developer Tab -> Insert -> More Controls ->... But it's not listed.
I also tried downloading the Microsoft Windows Common Controls-2 6.0, but when I tried to add it to Excel using "Register Custom...", it says "Cannot register this control".
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
On the attachment i have a userform which pops up when cell B2 is selected. It is a month view from the additional controls on the control toolbox. I've also added a couple of text boxes with spin buttons.
A few amendments i want to make to it are:
User form pops up next cell B2
'Enter button' enters date and time into cell B2
Spin buttons increase/decrease hour field in incremnts of 1 and minutes field in increments of 5
I'm trying to use the Date/Time ActiveX control in Excel 2000 and it is giving me problems. I am attempting to use this control contained directly on a worksheet (not contained on a separate form). My problem is that each time I start the workbook, the date/time control resizes itself to have an extremely large height. I set the control's height at 18 but upon loading it shows the height as about 5x that value. However, the properties of the control still show it listed with a height of 18? No matter what I do, I cannot seem to find a way to have the control maintain its initial height. I've tried this in several different workbooks, and it does the same everytime.
How should i reformat the date and time picker? at this moments, it shows the date in the format of mm/dd/yyyy but the format that i want is dd/mm/yyyy.
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value cboTypeofContact.Text = Cells(lCurrentRow, 3).Value DateofContact.Text = Cells(lCurrentRow, 4).Value TimeofContact.Text = Cells(lCurrentRow, 5).Value End Sub I am not sure what to put in its place.
I recently reformatted my hard drive and reinstalled my software. Now I don't seem to have the Date and Time Picker Control (among others) that I used to.
I did a thourough install of Microsoft Office 2000 Professional, and switched from Windows 98SE to Windows 2000 Professional. Isn't that control standard in such an installation? If its not, where can I get it?
i have just discovered the Microsoft date and time picker. at the moment i have a text box on my userform into which i put the date.can i use code to transfer the date to the text box or do i use the date picker instead of the textbox. if i used the date picker what is the code for the date picker
I have some excel tools developed in Excel 2003 which uses the date and time picker control (DtPicker). When I open my files in Excel 2007 the DtPicker is missing and the change_event will not load the calendar. I cannot find and activate the datepicker in the Reference base.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I'm trying to use the Date Time Picker control as a time picker and only want hours and minutes to show. Can this be done with its custom format property (Example)? The usual number formatting string doesn't seem to work.
I inserted the Date & Time picker Control into my worksheet. I have it linked to a cell. When I change the date, the new date goes into the cell, but it does not appear to be a "date" . The date formulas that use that cell do not evaluate properly. It looks different than when I type a date directly in to the cell (it is left justified). I tried formatting the cell as a date and the format property of the control is set to shortDate.
I am using the Microsoft Date and Time Picker Control 6.0 (SP4) from the more controls option on the developer Ribbon. The issue I have is when I protect the sheet I lose the functionality?
I have ranges selected as editable by user when the protect is on - this includes the linked cell to the date picker but it still doesn't work.
I have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
I am new to VBA. Using Excel 2010. I have a date picker on a userform named LtPayCalFm1. I have created a named range on a sheet within the workbook called LQD which is a date. I want the date picker to show the date LQD when the form opens. The code I have is
Code:
Private Sub LtPayCalFm1_Initialize() Dim LQD As Range DTPicker1.Value = LQD End Sub
I get Run time error '380': Invalid property value How do I correct this?
I need to set the dates on a tracking sheet to turn red after that date passes, I have tried using conditional formatting - Highlight cell rules - Greater than, but this hasn't worked.
I have a big spreadsheet with IT / Finance data. Below is the formula, I currently have. I am summing column Y in Tab Savings Data Detail, where column A does not equal Parent, and The Value in Column AK on the Savings data details tab matches the value in current tab for cell B26 and where column G on the savings detail tab equals Transition to IT. I am adding that value to the second sumifs statement essentially the values in column X on the savings detail tab with the same criteria.
Now I need to add to each of these formulas. I need to sum only the values where the date value in column W on the data details tab is greater than or equal to 01/01/2013 and less than or equal to 12/31/2013
find the easiest way?
=SUMIFS('savings data details'!$Y:$Y,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")+ SUMIFS('savings data details'!$X:$X,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")
I have Excel 2013. I would like to use the code below but I need it to let me select the range instead of specifying it in the code, then pop up a form into which I can fill in what I want it to search and what I need it replaced with.
So there's a macro "RoundedRectangle4_click" that's assigned to a box on a worksheet. It's a simple macro, I assume. it just takes the user to the 'Main Sheet' tab. I know the name b/c I rightclicked on the box to get the Macro Assigned.
I click on Macros (F8), it's not listed there, but"RoundedRectangle5_click" is, so I click on it, edit it to match the one I'm searching. Nope, nothing. CREATE button is highlighted.
I've gone to VBA (AltF11) to try to find it among the 25+ worksheets, forms & modules - haven't found it yet.
I am rather new to excel and currently using excel 2013.
I have a worksheet with column A ( data group) Column B ( Sent date with MM/DD/YY) , Column C Aged Group {using this formula =IF(B2="","",(TODAY()-B2))} , Column D status ( if the record is open or close).
I would like to create a table that can segregate the data group and how many days it has already aged. And then group them with different aged group. Refer to the attached screenshot.
From:-
Data GroupSent Date AgedStatus Quotation 06/06/1435Open Invoice 07/11/140Open invoice 05/01/1471Open PO 07/01/1410Open PO 07/05/146Open SO 06/30/1411Open Quotation 05/18/1454Open SO 05/05/1467Open Cash Note 07/03/148Close
To:-
Data Group0-15 15-3030 above Quotation Invoice PO SO Cash Note
