I am using Excel 2013
I need to print to a printer that is not the default printer, a range of Cells e.g. B4:L28 on Sheet Print Out.
The code is to be added to a VBA routine that already exists that collects & arranges the data on the Print Out sheet from other sheets in the workbook. This routine is assigned to a button on another sheet.
I would like to mirror a range of cells between two sheets in the same workbook, so that if the data is manually input into one of the cells in range (E5:H11) in 'Sheet 1', it is automatically updated in the corresponding cell in (H33:K39) of 'Sheet 2', and vice versa.
Using Office 2013. T
I am using windows 7 64bit sp1 and excel 2010 32bit sp1
I am trying to fix this formula (it takes a range in a unique column, and multiple row:
Code:
=IFERROR(INDEX($B$1:$B$6,SMALL((IF(LEN($B$1:$B$6),ROW(INDIRECT("1:"&ROWS($B$1:$B$6))))),ROW(A1)),1),"")
from here
I want to make it work on my array in a row, like this: (i need to remove the blank cells and the output have to be still in a row)
value1
empty cell
empty cell
value 2
value 3
empty cell
output:
value1
value2
value3
I need a function becouse I have dynamic table with something like 10k rows and 50 columns.
I have a big spreadsheet with IT / Finance data. Below is the formula, I currently have. I am summing column Y in Tab Savings Data Detail, where column A does not equal Parent, and The Value in Column AK on the Savings data details tab matches the value in current tab for cell B26 and where column G on the savings detail tab equals Transition to IT. I am adding that value to the second sumifs statement essentially the values in column X on the savings detail tab with the same criteria.
Now I need to add to each of these formulas. I need to sum only the values where the date value in column W on the data details tab is greater than or equal to 01/01/2013 and less than or equal to 12/31/2013
find the easiest way?
=SUMIFS('savings data details'!$Y:$Y,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")+
SUMIFS('savings data details'!$X:$X,'savings data details'!$A:$A,"Parent",'savings data details'!$AK:$AK,$B26,'savings data details'!$G:$G,"Transition to IT")
Here is an example of what I am trying to do in E2013.
The orange Bin is my input. It want that to return the column associated with the # as show in orange output column. I think this is an index command? I cannot seem to make it work.
Also - is there an easier way to insert sheets other than a screen grab and photos?
Using Excel 2013.
I have two columns of numbers. For a row, if the right number is greater than the left number, then color it green, if it is less then color it red.
e.g.
A1 = 100 B1 = 101, then B1 gets colored green
A2 = 100 B2 = 99, then B2 gets colored red
etc.
I have clicked on conditional formatting with A2 selected, then chose A1 for values greater than and chose green. I then copied the formula for all rows. I then did the same for values less than and chose red.
It is not coloring the cells correctly. On some rows when B
I have a spreadsheet that keeps track of the equipment we have on rent. Whenever we have a new rental, I insert a row and enter the information. I have several conditional formats I am applying - (1) making the font a light grey so that it is hard to see on any rental that has been called off, but invoicing isn't complete on, (2) making the font red on any item that is within 3 days of the term, and highlighting any row that isn't showing an invoice in over 45 days. When anything is completed (rental has been called off, and the final invoice has been approved), I cut the row out and put it in a sheet entitled "Closed Equipment". When I cut out closed records or add new records, it will occasionally mess up my conditional formatting by only referencing one row. Additionally, I don't want the conditional formatting to transfer over to the "Closed Equipment" tab.
Would this be easier to keep clean and straight if I used VBA? Or should I just continue to occasionally check my conditional formatting and clean it up? I thought if I used a Named Range instead of cell references, it might work better, but entering named range "On_Rent" converts to the cell range ($A$4:$AA$194).
I am using Windows 8, Excel 2013. The file is on a network drive, and others in the office can look at it (they all run Windows 7, and either Excel 2010 or 2007), but they look at it so seldom.
I have Excel 2013. I would like to use the code below but I need it to let me select the range instead of specifying it in the code, then pop up a form into which I can fill in what I want it to search and what I need it replaced with.
[Code] ......
I currently have this beast of a code running in Excel 2013:
HTML Code:
Sub OBTAIN_RAW_DATA_MACRO()
Dim NextCol As Long
'Copy data
Workbooks.Open Filename:= _
[Code] ........
However the issue lies in that once the data is refreshed, the slicers reading off the above raw data/pivots, automatically select all weeks, however this is not beneficial for the data being presented.
Is there anyway to have, once the Pivots have been updated, for the macro to then check and select current week range (beginning Monday) only?
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
How do I transpose a horizontal reading excel into a vertical reading excel and transpose all of the data and formulas?
View 1 Replies View RelatedI am looking for a macros to lock a cells dependent on another's value.
I have a spread sheet for quote numbers I don't want the employees to take a quote number (A) unless all cells have been completed in cells (C-K).
however there is another condition within this where if cell K says yes then lock Cells N O and P, however if it says No these cell must also be completed to take a quote number.
I have also added a macro to force enable macro with a welcome page and a macro to log the user name date and time of entry, I don't want to loose this it seems each time I try a macro for the locking cells or data validation it disables these macros.
In Excel 2013, how do I translate all characters of selected cells to Unicode?
There is a formula to translate the first character into Unicode [=UNICODE(text)] and that formula would have worked fine for me .Only if it could translate all the characters to Unicode not just the first one.
In Excel 2013, how do I translate all characters of selected cells to Unicode? There is a formula to translate the first character into Unicode [=UNICODE(text)] and that formula would have worked fine for me .Only if it could translate all the characters to Unicode not just the first one.
View 10 Replies View RelatedWe are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)
Screen_Shot_2014-05-11_at_46FDQO.png
I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?
EXCEL 2013
Please see the attached example. I'm trying to highlight cells only if 2 values in the row match 2 values in another row. If a book title/author combination matches that of another title/author combination in a different row, it would highlight. Some alternate rows will contain different titles by the same author, and some rows will have like titles by different authors...but they should not highlight.
The only situation where highlighting would occur is if the title/author pairing appears in another row.
I'm trying to decide if this would be a conditional formatting/highlighting rule, or if it would be a macro/vbs?
I'm using Excel 2013.
Pairing example.PNG
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
Excel sheet like this:
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?
EXCEL 2013
Using EXcel 2013, Windows 8
I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc
Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?
Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.
Working in Excel 2013......... I take 3 readings per day, I would like to see the daily average per day
In cases where the data is blank or "0", just average the 2 readings.
Sample Data
Date Speed
6/1/20142560
6/1/20142550
6/1/20142558
6/2/20142554
6/2/20142537
6/2/20142532
[Code] ..........
My and a work college needed to combine our separate excel worksheets into a single document.
Office 2013 didn't have a function to "import sheet from file" so we used open office to import my .xlsx worksheets.
After we finished importing we exported the final workbook as .xls (so I could open it).
After opening the workbook on my pc (excel 2013) i notice some of the sheets no longer have column headers, but the row headings still exists. (No ABCD, only 1234)
Also I am unable to use features such as "Freeze Pane"
I suspect this was caused by importing and exporting through open office?
Tried a macro with no luck, I want to save workbook to PDF and have it named by the value in A3. I want the Dialog box to pop up so I pick the folder?
View 6 Replies View RelatedI installed excel 2013, but I don't find the (VBA) buttons on the ribbon, since.
Is there a need to install an add in / or activate an add in?
The macro's are on the ribbon on the tab VIEW.
I expect to find the buttons on that place also.
How to activate Developer Tab in Excel 2013.
View 1 Replies View RelatedI'd like to record a macro that allows me to take the current file "file.csv" and save it as "file.xlsx"
I can't get the variable right (just messing around in VBA to have it get the file name and save it as a different format (csv to xlsx)
I've tried:
Function GetFullName() As String GetFullName = ThisWorkbook.FullName End Function
I currently have a workbook that has VBA functions that calculates values by looping through large amounts of data in a few large excel sheets. I want to transfer the data from these sheets into Access and then bring data into the VBA code via an array from the data in Access rather than the array being populated from the data in excel as it currently is. How to create the connection. The access DB will be situated in a public directory on a server. How to create the connection string and then how I call the data from Access? I have just downloaded Office 2013.
View 9 Replies View RelatedI have a complicated spreadsheet with several columns. Some columns B, D, E, F, M come from calculations on other columns or are columns copied from other worksheets within the same workbook.
I have another column C which is generated entirely off a macro with no input from the user.
I insert a row at line 8 (see above). However its just a blankrow and the formula highlighted in E2 does not show in E8 but it does appear for E9. I'd need that formula to be in E8.
My dilemma is how to insert a row and have it copy the formula from too.
I'd like to avoid copying another row into it and editing data. Other thing to avoid is putting all new rows at the end of the spreadsheet if possible. Has to be in the middle of the existing table.
I have Excel 2010 or 2013.
VBA Code Cleaner
I just can't seem to figure out how to use the Code Cleaner, after installing it I can't find any option to use it :S
I'm using Excel 2013 and W8 (if that's relevant).
Why does importing and exporting the code reduces the size? What kind of "junk" is stored and why? and when?
I have a construction schedule that my boss wants modified. There is a pesky dot I cannot select to delete. It is on a grid line and I can only select the cells adjacent to it.
I am using 2013
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
Looking to add automatic date stamp to a column of cells each time their corresponding row or specific cell in that row is modified.
I'm using Excel 2013.