Excel Sheet Tabs On The Top Row
is there a way by which i can have Excel sheet tabs on the top rather than currently at below.
View Complete Thread with Replies
Related Forum Messages:
Is There A Macro To Transfer A Row Of Data From Top To Bottom Row Of Range ?
I have a s/s encompassing over 350,000 rows.
Data consists of a series of ranges from columns A:N and rows varying in number between 3 and 30.
There are two blank lines between each range of data.
Each range is (with exception) numerically ordered down column H (e.g, 1, 2, 3, etc).
Problem: there are around 1100 occasions when a range contains a row of data which is to be disqualified from consideration. On these occasions the data always appears in the top row of the range and is identifiable in column H by the nine codes 111, 222, 333, 444, 555, 666, 777, 888, and 999).
I wish to find a macro which will :
1. where the top row of a range in column H is one of the codes 111 to 999, transfer that row of data to the bottom of the range.
2. delete the now empty top row from which the transfer was made from.
3. insert a new blank row at the bottom of the range below the row which the data was transferred to (in order to maintain the two blank rows above and below each range).
Copy Top Row Down
I need a macro that will copy the first row of a worksheet, insert rows below and insert the data.
Sheet1 *ABCDEFGHI1*1234567*2*1201212****3200010010099.7699.76***20004*1201212121215*5202599.7610099.7699.7699.7699.76202520256*120121212***7202599.7610099.7699.7699.76**2025 Excel tables to the web >> Excel Jeanie HTML 4
Sheet1 *ABCDEFGHI11*1234567*12*1201212****13200010010099.7699.76***200014*1234****15*1201212121215*16202599.7610099.7699.7699.7699.762025202517*1234567*18*120121212***19202599.7610099.7699.7699.76**202520*12345*** Excel tables to the web >> Excel Jeanie HTML 4
Hyperlink To Top Position Of Sheet
I have an index on sheet 1 that hyperlinks to various cells on sheet 2.
Some of the links end up as the last visible active cell on sheet 2.
How can I have the linked cells in sheet 2 be the uppermost visible active cell below row 1 which is frozen.
Vlookup, Then Return Top Row Value Of Closest Value
I'm trying to vlookup age in column A, then find the closest match of that row, then return the top row's column value of that closes match(largest value less than or equal to). looking for a formula to accomplish this.
For example, for age of 1month, I have a value of 7.5. So, I'd like to return: "5th"
Extract Top Row Number After Filter
I have to find out the top first number aftet filtering the data based on particular column. ie each time when i am taking each filter value the row will start from different number.
so how to find the top row number after filter? U got what i mean?
Shifting Cell Data To Top Row
I need a macro to shift column data to the top row for a given cell range sharing common data in row A.
I need to get from this:
Name Fruit Meat Dairy Bakery Alex Apples Alex Milk Alex Bacon Alex Bread Bill Steak Bill Eggs Bill Chicken Bill Oranges
Carl Butter Carl Cake Carl Milk Carl Bananas Carl Pork Carl Peaches Carl Chicken
Name Fruit Meat Dairy Bakery Alex Apples Bacon Milk Bread Bill Oranges Chicken Eggs Bill Steak Carl Bananas Chicken Butter Cake Carl Peaches Pork Milk
It would be nice if the shifting would sort the data as well.
Lookup Multiple Columns And Return Top Row
I've been working this for ever and can't seem to figure out the best way to go about it. I have attached an example sheet. All I need to do is figure out the Dept #... which is listed in Row 1, Column F:H. I want to match the project numbers and then return the AA, BB, or CC in Column B.
Sheet Tabs Count
I know excel has a built in function for this. But it won't do what I need for this below.
Say, I have 9 worksheets open. In cell N7 on sheet 1 I need it to count the worksheet tabs.
But the dilema is to only count the tabs that will equal sheet 1, sheet 2, sheet 3, sheet 4, sheet 5, Notice, I have a space before the number. Other sheets have a specific names to them which I do not want to count.
So if sheets 1 thru 3 are visible with the other named sheets visible cell N7 will count 3
Sheet Tabs In 2007
Have designed a spreadsheet in 2003 at work and got home to work on in it using my machine which has 2007 loaded.
Have hidden the sheet tabs on the 2003 sheet and can not find the option in 2007 to make them visible again.
I realise I can ctrl-pgup and pgdn but I got a fair bit of movement from sheet to sheet to do and that wont be practical.
Referencing Sheet Tabs
Is there a way to use the "value" of a name in a drop-down list to reference a sheet tab name in a formula?
A1 has a drop down list. When a name (Bob's Sales) is selected from the drop down list, B1 shows the value of cell D5 from sheet "Bob's Sales".
Auto Delete Rows To The Top Of The Sheet After Find
1) Highlight column A, and do a search on the word "Item"
2) Once it finds the word item, move 2 rows above it, and delete all rows above the word "Item"
The word Item at times can be on any row, and its very random, but its always in column, A. I tried doing it with a regular macro, but it seems to remember the row that I used, rather than two rows above the word "Item".
Hide & Unhide Button On Top Of Sheet ?
I want to hide & unhide columns using only (plus minus) button which is appearing on top of current sheet. I have couple of files with that options built in, but I dont know how to do it. I tried to see macros but appears that there is no macros at all in that file??
If Any Cell Is (red) Has A Color Index Of 3, Bring The Whole Row To The Top
I have a worksheet with several columns and 1,000's of rows. I have code that makes all "good cells" grey (color index 15) and all "bad cells" red (color index 3).
I would like to do 2 things...
1. If ANY cell is RED, cut the WHOLE ROW and "insert cut cells" below the header row (even if ALL other cells are grey), then repeat the process up the whole worksheet until ANY row with a red cell is at the top.
2. Create a new worksheet named "Trouble Cells", copy the header row along with any rows with red cells.
I would like to keep the formatting the same (for example, the title row is always yellow and is "28" high and all other rows are a height of "12").
I would also like to keep the column width of each column in the new worksheet as well.
2000 Sheet Tabs Missing
I am pulling my hair out trying to figure this out. Any help at all is greatly appreciated. I created a spreadsheet for a friend to track his profit/loss for his business; he is not very computer literate so I created separate tabs for each month. I have no idea what he did but the horizontal scroll bar and all of the tabs are not visible, he is using excel 2000 on windows XP. Unfortunately we are not in the same area so I canít go look at his screen. When he emailed the file back to me and I opened it, it looks fine. Also when he opens any other file it does the same thing. I have gone through all of the obvious causes, everything is correct in the tools, options.
Automatically Rename Sheet Tabs
I have a workbook with multiple tabs. On sheet one a person chooses a date to initialise a formula. That date is then copied to sheet two and placed in cell D5. The date is projected out for two weeks and then the next fornight starts on sheet three and so on. The start date for each new fortnight appears in cell D5 of each sheet. I want that information to be the name of the tab for sheet two, three etc. I have put this code into the "This Workbook" section:
Private Sub Worksheet_Change(ByVal Target As Range)
' Renames all worksheet tabs with each worksheet's cell A1 contents.
'If cell A1 has no content, then that tab is not renamed.
For i = 1 To Sheets.Count
If Worksheets(i).Range("$D$4").Value "" Then
Sheets(i).Name = Worksheets(i).Range("$D$4").Value
I have also tried:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$D$4" Then ActiveSheet.Name = Left(Target.Value, 10)
I then go back into sheet one and change the date and nothing happens. I seem to be missing something. Can anyone please help?
Sheet Tabs Not Visible In 1 Workbook
I know this is probably an easy one, but can anyone help, I have a spreadsheet with aboout 8 worksheet tabs, for some reason they have disappeared I have emailed the spreadsheet to my work email and everything is fine, does anyone out there know what I have done. I have checked the tools options and view tab as informed and the sheet tabs are definately checked, also I have ensured that the tabs are not hidden.
Consolidate All Of The Tabs In The Master Sheet
I have a file that will have a maximum of about 25 tabs in it. They are all the same format - Column A have account codes, Column B have the account name and Column C through to Column AD have figures. Column B has a drop down menu, so not all tabs will have the same account code on the same row.
I thought that I would create another spreadsheet in the file and call it a master sheet with the same formats as all the other tabs but this master file will have all of the account codes available and will not have a drop down menu in column B. What I wanted to do was consolidate all of the 25 tabs in the master sheet.
Acc Code Desc Amount
Acc Code Desc Amount
Lock Sheet Tabs Using VBA
I need to get rid of the option to DELETE a sheet. However, when I password protect the WORKBOOK (which does this fine) none of the Macro buttons will execute, even with Macro security settings set to ENABLE ALL.
Looks like I will need some VBA code to not allow any of the sheets in the workbook to be deleted.
Sort Data And Copy Top & Bottom 10 Into New Sheet
I'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
Count Sheet Tabs Based On Color
I have a worksheet with like lots of color coded tabs and the tabs increase everyday. The tabs are categorized based on 6 colors. I created a first tab in order to give how many tabs i have another each color. Is that doable in excel. Do I need a macro for this.
All I want is each time i open the excel sheet the first tab will be automatically updated with how many tabs I have under each color instead of me counting the tabs.
Merge Data From Many Many Tabs (worksheets) Into A New Sheet
Basically I inherited a Excel Workbook which has 128 different tabs, unsurprising this is almost impossible to manage.
My requirement is to merge all of the 128 tabs into 1 tab 'Sheet1'.
The macro should keep going even if there are blanks, it should move onto the next tab only when there are over 10 consecutive blanks in Column B.
I have tried searching the forum but nothing seems to cater for the specifics of this case. I would really appreciate some help. I mean really, i am in a mad panic thinking i will have to do 128 tabs manually otherwise.
Copy Rows From Multiple Tabs Into One Sheet
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I donít want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
Sheet Tabs Disappear When I Open Excel
my sheet tabs sometimes disappears when I open excel. I know you can go through the start button and the advanced option to display the sheet tabs. Is there code I can incorporate so that on the opening of the excel file after the splash screen runs its course, the sheet tabs are displayed.
Copy Worksheet To End Or Far Right Of Sheet Tabs
This macro helps me create a blank worksheet and automatically names it from the list in column A. Unfortunately, it adds the worksheets to the left of my 'master' sheet called "Tab Names". When I try adding "after" when it adds a new sheet, I keep getting a "compile error: Expected: end of statement". I am positive you will know what steps I'm missing.
' Vendor List Subroutine to
' Open New Worksheet called Tab Names worksheet
' With data from Tab Names
' Rename sheet to name from list and start again
' For all names in list
Dim cCell As Object, i As Integer 'Two variables cCell (current Cell) object and i (standard counting integer)
Cells(1, "A").Select 'Ensure that we start each time at the top of the worksheet
Application. ScreenUpdating = False 'Turn of screen updates whilst macro is running
For Each cCell In Range(Cells(1, "A"), Cells(1, "A").End(xlDown)) 'Will run our code through each cell with text
Set NewSheet = Sheets.Add(Type:=xlWorksheet) 'Add new worksheet
NewSheet.Name = "Tab Names Worksheet" 'rename worksheet
Sheets("Tab Names worksheet").Name = cCell.Value
Macro To Load All Files Within A Folder To New Tabs With File Name As Sheet Name
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
Click Button To Rename Sheet Tabs Based On Range
I searched a few times for the answer to my problem, using different search terms, but I've come up somewhat empty (this *might* be because I'm not up-to- speed with Excel's terminology?). Anyway, my problem is this: I have a workbook which is designed to track various data for a corporate training course ( sheets for attendance, grades, tool logins, etc). After all of these are sheets numbered 1-25 (we never have more than 25 students in a class, but usually around 20). The numbered sheets correspond to the student's number in the on the class list sheet (so, the first student would have personal "report card" information on sheet 1; the eleventh student in the class list would have their information on sheet 11, etc).
What I would like to do is have some way of putting a button on the class list sheet which would look at student list and rename the sheets to correspond to the student names. For example, if the fifth student listed was 'John Doe', it would rename his personal sheet ('5') to 'John Doe'. Obviously, I would need to do it for all of the students, and IDEALLY it would then get rid of any numbered sheets which are not used (having 21 students would only rename the first 21 sheets, but then hide sheets 22, 23, 24, and 25).
Referencing Selected Tabs To Print Selection & Update Table Of Contents Sheet
I searched but didn't find exactly what I needed. I have a workbook with 31 sheets. It is a price guide with each category on a separate worksheet. I figured out how to list the sheets on a separate tab. What my client wants is the ability to:
1. select certain categories for printing, the ToC, Cover and backcover pages have to print in every case
2. the ToC has to change depending on the sheets selected.
I'd rather write some code and give him an an easy command button rather then teaching him how to select non-concurrent sheets and printing only active sheets.
What I'm really stuck on is the updating of the ToC with active sheets only (category and starting page which changes depending on pages selected).
Copy All Data From Data Sheet, Sequence Top Down By Spend, Manually Delete All After 50
I have two sheets, a data sheet with all our customers by ref, name and spend; and a presentation sheet.
In the presentation sheet I want to display the ref, name and spend of the Top 50 customers by spend, price high to low.
Copy all data from data sheet, sequence top down by spend, manually delete all after 50.
My only issue is that each month the data sheet will update and I want the Top 50 to auto update, without performing the workaround above.
Is there a way to do this without VBA i.e. pivot tables etc
Macro - Rename Only & Sheet... & Tabs With Last 8 Characters From Cell
I pull an excel sheet from a database each day that gives me sales data for different products sold. The way the spreadsheet comes from the system, the first tab is named "Document Map" and lists all of the products, and each product then has its own tab but they're generically named (Sheet1, Sheet2, etc.). The name of the product is always in cell T8, but the name itself is only the last 8 characters of that cell.
What I'm hoping to accomplish with a macro is two things:
1) Retrieve the last 8 characters from T8 in each tab, and name the tab with those characters (same effect as the formula "=right(T8,8)").
2) Ensure that this only occurs on tabs with the word "Sheet" in the beginning. Depending on the day, there could be any number of products and they each get their own tab, so I was hoping to be able to get the macro to only work on sheets where the first 5 characters are "Sheet" regardless of the number after that.
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Sheet 1 Ė is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.