I have a file that will have a maximum of about 25 tabs in it. They are all the same format - Column A have account codes, Column B have the account name and Column C through to Column AD have figures. Column B has a drop down menu, so not all tabs will have the same account code on the same row.
I thought that I would create another spreadsheet in the file and call it a master sheet with the same formats as all the other tabs but this master file will have all of the account codes available and will not have a drop down menu in column B. What I wanted to do was consolidate all of the 25 tabs in the master sheet.
Example Worksheets
TAB 1
Acc Code Desc Amount
1________a___10
2________b___10
I am trying to consolidate a specific range on 8 similar worksheets into a master list through the use of a macro, and the workbook has a total of 26 worksheets. Details:
The worksheets to be consolidated are named: AR, CM, JR, Trader1, Trader2, Trader3, Trader4, and Trader5. The range to be consolidated are: A6:F26, of each of the above worksheets. Currently, A6:D21 are linked through an array from the worksheet "Index". This is because there are often changes to the names listed under "Trader/Backup Trader", or there may be additions/deletions of a row.
Right now, I have set up a sheet called "Traders List", using arrays to link the data on the 8 different sheets. The only problem is, if there were a change in the "Index" worksheet, I would have to manually drag out each array, for these 8 different worksheets in the "Traders List" sheet. Is there a way a macro can be written such that it is automatically linked to each range (A6:F26) on those 8 worksheets? Is it possible to only show rows that are non-zero?
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.
My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?
I think this needs a For Each loop, but I am stuck on how to get it accompished. In the folder I will have about 26 workbooks with all different titles, but the beggining is always the same for the workbook and the worksheet (Bldg). There will be only one ws per wb and the wb I am using to collect all of the worksheets is Final.xls. The code attached works fine, but the only way right now I know how to capture the next wb/ws is with a call.
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
I have an excel file with a Bill of material for each tab. I'd like to consolidate all the equipments from the differents tab into an unique tab. I enclose a sample: Test BOM.xlsx
I'd like a macro that should be able to detect the name and the quantity of equipment in each tab and copy the data in the 'desired output' tab. I don't know if the same result is possible with a pivot table.
consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
I have multiple tabs and each tab has an invoice. In the summary tab, I want to grab certain cells ie. Invoice #, Number of items, and total invoice amount.
The tricky part is, although the format for each invoice is the same, the product list for some invoices may be longer in some invoices (which will affect the total amount - aka total amount may be in cell F40 instead of F10).
Since I get these invoices on a regular basis, I would really like to create a macro where it will just find the items I need and paste it in the summary. I have no problems making this file work if the items are all in the same cell and format for each tab.
I have three months that people fill out on separate sheets. I would like to use a macro to place the contents only from a certain amount of columns to as many rows as it takes (not blank).
I am trying to create a master list in a new sheet based on the data contained in 4 separate tabs. The data is Username, Display Name, Company. Unfortunately some users have accounts in 2 of the companies (with the same username) and I need these to default to Company A.
The output need to be username, Display Name, Company.
I am trying to create a worksheet that you fill in data on the master tab, and it copies to the appropriate secondary tab based on set of criteria
I have one worksheet with multiple tabs.
Tab 1 - Master - This tab is updated by admin with new contacts Tab 2 - Customer service rep 1 - This tab will have all the listings that have the CSR1 in a column in the master table. Tab 3 - Customer Service rep 2 - This tab will have all the listings that have the CSR2 in a column in the master table.
Each table has the same columns of data which all need to be copied to the sub tables if the CSR column matches.
Is there a formula that would work to auto copy data from the master to the appropriate sub tab or maybe its needs to be done in VB?
From a master (data entry) spreadsheet of work projects, I'd like to automatically create a tab for each individual contributor that lists all projects they are involved with. The thing is that being a contributor can mean being the lead, assisting with, or being the technician on the project (all columns in the master). To make the individual tabs easier to read, it'd be great to have that tab's contributor name in red, wherever it happens to fall in the various columns.
I've created an example that's a little simpler than reality - in real life there would be 20 tabs for the individual contributors and instead of 3 "Assist" columns there would be 20 columns.
I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
I have a macro that enables me to split my master table into separate tabs based on the first column. However, the column widths and the header format is not retained. Is there something I can add to the macro below to keep the formatting?
Code: Sub DispatchTimeSeriesToSheets() Dim ws As Worksheet Set ws = Sheets("MasterList") Dim LastRow As Long
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
My task is to consolidate 4 Excel Project Lists (Workbooks) to a Master Workbook. The Project Lists has a different structure and almost different content. The relevant information is always on Sheet1 but it has completely different ranges. The only constant is the Project Number, which should be used to sort the information. Every Project should be listed only once with all the existing information.
I found a code written by Ron de Bruin which has already some components that I want to have in my VBA but I think there are still a lot of necessary adjustments to do.
Code: Sub MergeSelectedWorkbooks() Dim SummarySheet As Worksheet Dim FolderPath As String Dim SelectedFiles() As Variant Dim NRow As Long Dim FileName As String Dim NFile As Long Dim WorkBk As Workbook
[code]....
The Master Project List should has the headers in Row1 and the information listed below. The Macro should automatically places the correct information to the correct column. Some of the information are in 2 or more of the lists but they should be listed only once in the Master List.
Project Number
Project Description ... 1111E.000000001
[code]....
I guess a problem is that the structures of the Lists are quite different so there must be a kind of sorting process.
In the end I want to have an Excel File with the Macro and a Command Button and by clicking the Macro creates a new Workbook with the Master List.
It would be better if there is a variable range instead of a defined. Like the Macro searches the last row and starts at this row and column.
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol() Dim Sht1 As Worksheet Dim Sht2 As Worksheet Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
I have 2 pivot table in 2 different sheet and i want to consolidate the data in one sheet.
Pivot table:1(order processed) as below
date MR X MR Y MR Z MR S
[Code].....
I need the data as below in separate summary sheet. 2 column in each employee(1 is processed and completed), i dont have option here to create 2columns here hence i put "/" in between.
date MR X processed/Completed MR Y Processed/completed
I'am have one data file with so many sheets those need to edit and bring them to final summary sheet.
I dont know how to move between sheets and edit them automatically.
Editing will need to add the brand name next to the variance name and the sheet name in one new column. And bringing those rows with completed data only to All sheet from those sheets in workbook.
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN SHEET-2 CCI CONTAINS ONLY 19 COLUMN FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I have 20 excel files each having more that 1000 records, the format and header for all the files are same.
I need to consolidate all these 20 different files into one excel sheet, having only one header row at the top. Since I need to perform this step frequently, I am planning to automate it.
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
