I have a txt calendar control the askes the user for a date, then find that date in another sheet.
If the user enters a date out of my range the code bugs out. Is there an error handeler for this? Like can I set an error message?
I have some code that expects the user to select a file to open. If they don't select a file it posts an error message "Stopping because you didn't select a file" then it exits. However then Excel pops a debug window. How can I get it to cleanly exit and not pop the debug window?
View 9 Replies View RelatedI have a production report card spreadsheet with numerous checkboxes. Originally I also had text boxes for user input - which I have since removed all of and simply unlocked cells for user input (I protect the spreadsheet). My problem is that now that I have removed ALL of the textboxes - I get the error message "Can't exit design mode because Control 'TextBox3' can not be created." everytime I go to lock the spreadsheet after tweeking or upon opening of the file. I also cannot use the checkboxes now because I am stuck in design mode.
Any thoughts on what might be causing this...or better yet...how to stop the error msg altogether? I googled and no answers...some theories that it was a bug with excel2003...but I find it hard to believe as I found posts for the same message of users of WORD2003...so I am thinking it might be VBA related?
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.
Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
Code:
For Each src In Worksheets
If src.Name Like "EF Spend*" Then
Sheets(src.Name).Select
Else
Next src
End If
This is an extract of a larger code, but this section is producing a Compile Error: Next without For but I cannot workout how to resolve it.
My formula =IF(OR( FIND("Bugs",E2),FIND("Daffy",E2)),"/wkly",0). Always returns #VALUE! error. I can understand if neither value occurs in the string, what confounds me is if one of the two does occur in the string If I shorten to
=IF(FIND("Bugs",E2),"/wkly",0)
Then the expected output is returned
I am having trouble with the following code. When I put in a value in C8 that is on the list being searched (A2:A27), the Answer is still coming up as false (ie, the find function isn't finding the variable in the list, though it is there). I'm guessing I'm using incorrect syntax somewhere.
Dim Answer As Boolean
Private Sub CalcBi_Click()
Dim Pledge, Edate, PR, PPA, EEA As Double
Dim Due, Chdate As Date
If Range("C6").Value = "" Or Range("C8").Value = "" Then
Exit Sub
Else
Pledge = Range("C6").Value
Edate = DateValue(Range("C8").Value)
Set rngschedule = Worksheets("Bi Weekly Schedule").Range("A2").Offset(Application.WorksheetFunction.Match(Range("C8"), Worksheets("Bi Weekly Schedule").Range("A2:A27"), 1), 0).....................
The On Error GoTo works if there is only one instance of the text not being found but crashes if there is a second.
I have tried adapting code found here http://www.excelforum.com/excel-prog...ght=cells.find but can't get it to work exactly as i would like.
Here is an extract of my code. There are about 12 different cells.find in total.
I am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
The desired result in J2 = "Jim"
the value in cell I2 = "Jim |Anderson"
Working Function as follows:
I am writing some code where one column is selected and a value is searched for in that column. If found the code continues on its way manipulating the data. The issue is that the value being searched for will not always be there which results in an error. Is there a way that I can just tell the macro to continue running if the value is not found.
Columns("V:V").Select
Selection.Find(What:="1", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Rows(ActiveCell.Row).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Delete Shift:=xlUp
On a second question is there some code I could write that would select all the rows with the number 1 in column V and delete them rather than doing the way I am here?
I'm trying to write some VBA which will allow me to find certain instances of data across a number of different sheets and copy this into another sheet.
However if the sheet doesn't contain the data I'm searching for an error pops up and the macro dies, is there a way to search where if the macro doesn't find anything it skips to the next line?
Is there a list of error numbers and their meaning?
View 9 Replies View RelatedI have a UserForm (and associated code) to locate a specific entry in Column 'A' of a spreadsheet and insert a date, initials, and hyperlink to another file.
The basic code works fine, but did not account for the user entering a Job# that was not in the system, so I added an If/Else to account for this...
The additional code took the If (Job# not found) route every time...
Following many hours of searching this site and variations of the error handling code, I still can not get it to work.
So I'm asking for your assistance to point out why the error handling (based on other successful code found here) is not working for me.
'Insert Link
Private Sub CommandButton3_Click()
If TextBox1.Value = "" Then
MsgBox "Please Insert a Job#"
Exit Sub
ElseIf TextBox2.Value = "" Then
MsgBox "Please Insert Quoters Initials"
Exit Sub
ElseIf TextBox3.Value = "" Then
MsgBox "Please Insert Quote Date"
Exit Sub
The 'Find' part of the code is working, as the correct cell is selected after running the code... but it gives the error message, instead of executing the rest of the code...
If I remove the 'On Error Resume Next', it stops on the find block, where on inspection FindR = Nothing.
So if FindR does = Nothing, how did it manage to select the cell?
Asking for a row value to be returned if a string is found to exist in the sheet. Works great if it finds the value but I get the following error when the string isn't found:
Run Time Error '91':
Object Variable or With block variable not set.
Concept code follows. The commented strOCNumOF line contains the value that's found on the sheet. The uncommented line contains a value not found.
Sub find_test1()
Dim intFoundOnCur As Integer
Dim strOCNumOF As String
strOCNumOF = "AP4506"
'strOCNumOF = "BP6020"
intFoundOnCur = ThisWorkbook.ActiveSheet. Cells.Find(What:=strOCNumOF, SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
End Sub
I have the following code in a macro to open up a find dialog box, but it does not seem to work. I am getting the following message when I try to find something:
Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exist in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected sheet.
I checked the data I am trying to find and replace and it is correct.
I am attempting to use the Find and Replace code you assisted with me into another project, But I am missing something. I keep getting a Variable not define error when I go to search for a CMM # in the add a referral form.
Highlight in yellow is the code ...
I am trying to run a macro that i have copied from another workbook (which works fine) and when i try to run the macro i am getting a 'compile error' which says "Can't Find Object or Library" and takes into VB editor which highlights the word "Trim", which is part of a formula. What does this mean? I can't understand why the same macro will work in another workbook but not in this one. Below is the full code, I would have attached the workbook but it would not work for you as it opens and saves files that you would not have. Hopefully someone can understand from the code.
View 10 Replies View RelatedI have a spreadsheet with a large amount of data, and one thing I need to do is Find the maximum value in a column and then select it. I was originally using an If loop to find it, but I would like to make the code more efficient by using this method. My code is as follows:
Function FindCells()
Dim FindData As Long
Dim Row_Number As Integer
Range("L5:L2000").Activate
FindData = ActiveSheet.Cells(6, 15).Value
Range("L5:L2000").Find(What:=FindData, After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Row_Number = ActiveCell.Row
ActiveSheet.Cells(2, 14).Value = Row_Number
End Function
This string of code works fine, but it doesn't find the right value. Cell (6, 15) contains the maximum value but excel treats it as a whole number. If I try to change the data type of FindData to double or to string I get a Runtime 91 error. If I change LookAt to xlWhole I get the same error.
I have a workbook that is used by a number of different users accross the company. Some people have PC's running Windows 2003 SP3, some have terminals with either
- Windows 2000 SP4 with Excel 2002 SP3
or
- Windows 2003 SP2 with Excel 2002 SP3
on the server.
On the "Windows 2003 SP2 with Excel 2002 SP3" example the code below won't run.
Saying "Compile Error in hidden module." I unlocked the code and re-ran the "Workbook_Open" event but I keep getting "Compile Error: Can't find project or library". I have then checked the references but none have the "Missing" prefix, so I don't know which to look for. Does anyone know what DLL i need to load or should I just get IT to updgrade to SP3?
Code: ....
I have a single button on a spreadsheet. When clicked, it gives me Error 91: Object Variable or With Block Variable Not Set. This is the button's
Private Sub Analyze_Click()
Dim TextToLocate As String
Dim Searching As String
Dim TechNum As String
TextToLocate = "Mobile Device : "
Fname = Application. GetOpenFilename("@Road Excel Files,*.xls", , "Open @Road Log File")
Workbooks.Open (Fname)
' Error here at cells.find:
Searching = Cells.Find(What:=TextToLocate)
TechNum = Replace(Searching, TextToLocate, "")
TechNum = Left(TechNum, 5)
MsgBox TechNum
End Sub
The purpose of the code is to:Allow the user to open a log fileIn the newly opened log file, find the string "Mobile Device : "Following "Mobile Device : " is a tech number. Strip out "Mobile Device : " and grab the first 5 characters of the tech number.Show me what the tech number is in a message box
If I insert the code into the actual log file (no button and no opening of files), it works fine. I searched this forum and others and used everything I learned to find a solution, but the error remains.
I'm attempting to do a backwards search, but I keep getting a mismatch error on the Find function and don't know why....
View 3 Replies View RelatedI am using the calendar control on a form of mine, which i believe requires ms access to be installed to use(from what ive read). This is fine as most of the PC's it will be run on have this installed. However if it is run on a PC that doesnt have ms access it gives me the "Could not load an object because it is not avaliable on this machine" and then "cant find project or library error". How can I trap this error ? Ive tries whe the workbook opens, and when the form initializes but it just brings up that error
View 2 Replies View RelatedI am working on a form in VB and when I try to enter data into Textboxes (which all have either a currency format or date format) I get an error that says "Compile Error - Can't find project or library". I think the problem may be that I need additional references uploaded onto my VB but am not sure. Any Ideas?
View 6 Replies View RelatedI have searched the Forum for help on this error 91 but still cannot figure this out.
Below is a format macro I created. I have several ' Find' routines in here and at the beginning of each one I give it an 'On Error GoTo' type statement. This seems to work fine until it gets to a second error. I have moved various 'Find' routines around and it doesn't matter which order they are in, if there are two things it can't find, it gives the error 91 on the second.
Sub Format_SFDC_Detail_Reports()
'
' Macro to format salesforce.com reports with details. rguest
'
On Error Goto errorhandler
Msg = "Do you want to format this report for Landscape (Yes) or Portrait (No)?"
Style = vbYesNoCancel + vbQuestion + vbDefaultButton1 + vbSystemModal
Title = "Format Report as Landscape?"
response = MsgBox(Msg, Style, Title)
If response = vbCancel Then
'Exit the routine
Goto last_line:
End If
If response = vbYes Then
format_style = "Landscape"
End If
If response = vbNo Then
format_style = "Portrait"
End If
I have error trapping in place so if a find in a column returns no data the procedure continues, but the code breaks there anyway.
In Tools/Options/General/Error Trapping I have Break on Unhandled Errors checked.
I have changed my error trapping lables.
I have copied the procedure and renamed it.
Exit Sub alternative. I have the following
View 5 Replies View Relatedhow to set up a macro that will close my workbook without saving.
View 3 Replies View RelatedI'm trying to find the Cell that contains the string "Grand Total" along row 5.
The following code is giving me Error 1004
Dim column As Long
column = 1
Do Until ActiveWorkbook.ActiveSheet.Cells(5, column) = "Grand Total"
column = column + 1
Loop
The "Do Until ActiveWorkbook.Activ...." line is highlighted in Debugger as the problem line.
when the code runs until
'*This is to the row that contani the target
lRow = Worksheets("sheet3"). Range("A3:A3000"). Find(What:=code, LookIn:=xlValues, _
LookAt:=xlPart, _
SearchOrder:=xlByColumns, _
SearchDirection:=xlNext, _
MatchCase:=False, _
SearchFormat:=False).Row
it gives me this msg : subscribpt out of range
here is the whole
Private Sub Worksheet_Change(ByVal Target As Range)
Dim code As Variant
Dim lRow As Long
Dim color As Range
Dim discrib As Range
Dim price As Range
Dim myrange As Range
