I am having trouble with the following code. When I put in a value in C8 that is on the list being searched (A2:A27), the Answer is still coming up as false (ie, the find function isn't finding the variable in the list, though it is there). I'm guessing I'm using incorrect syntax somewhere.
Dim Answer As Boolean
Private Sub CalcBi_Click()
Dim Pledge, Edate, PR, PPA, EEA As Double
Dim Due, Chdate As Date
If Range("C6").Value = "" Or Range("C8").Value = "" Then
Exit Sub
Else
Pledge = Range("C6").Value
Edate = DateValue(Range("C8").Value)
Set rngschedule = Worksheets("Bi Weekly Schedule").Range("A2").Offset(Application.WorksheetFunction.Match(Range("C8"), Worksheets("Bi Weekly Schedule").Range("A2:A27"), 1), 0).....................
I am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
I am writing some code where one column is selected and a value is searched for in that column. If found the code continues on its way manipulating the data. The issue is that the value being searched for will not always be there which results in an error. Is there a way that I can just tell the macro to continue running if the value is not found.
On a second question is there some code I could write that would select all the rows with the number 1 in column V and delete them rather than doing the way I am here?
I have a spreadsheet with a large amount of data, and one thing I need to do is Find the maximum value in a column and then select it. I was originally using an If loop to find it, but I would like to make the code more efficient by using this method. My code is as follows:
This string of code works fine, but it doesn't find the right value. Cell (6, 15) contains the maximum value but excel treats it as a whole number. If I try to change the data type of FindData to double or to string I get a Runtime 91 error. If I change LookAt to xlWhole I get the same error.
I have created a calculated column in PowerPivot and inserted a formula that worked in a normal excel spreadsheet however, this formula does not work in PP anymore.
=find("green",Table1[Name],1)
Name column: NAME: Bag green
it should find "green" in the name and return the position. Hoever it alway returns the error, that the find function could not find the string.I have attached an example spreadsheet.
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
Where: F13 = Employee number Column C on the pivot 156 workbook is where the employee number is based. The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91': Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
I have a range of cells, for this example I will use 2.
Cell E17 = 77/170 Cell E18 = 8/9
Using the following formula: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)))
This bring back an #VALUE! Error as the second part of the formula keeps picking up "/9" however the first part works fine, displaying "170"
Now if I use: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)-1)) It all works. The problem is that I need this to be automatic using the above way means having to add a "-1" to every formula for a cell with only 1 char to be added.
Using the formula: =SUM(RIGHT(E17,FIND("/",E17)-1))+SUM(RIGHT(E18,FIND("/",E18)-1)).....
my formula called ' conversion' used to convert foreign money in EUR does not seem to work. My formula gives a value error. I wonder why...
Function Conversion(Position As Integer, Currency As Integer) As Integer
Dim USD As Integer Dim GBP As Integer Dim CHF As Integer Dim JPY As Integer Dim NOK As Integer Dim NZD As Integer Dim SEK As Integer Dim ZAR As Integer Dim ISK As Integer Dim TRY As Integer Dim AUD As Integer
' here i give a destination to my forex quotes who are in a excel sheet USD = Range("N9").Value GBP = Range("N10").Value CHF = Range("N11").Value JPY = Range("N12").Value NOK = Range("N13").Value NZD = Range("N14").Value SEK = Range("N15").Value ZAR = Range("N16").Value ISK = Range("N17").Value TRY = Range("N18").Value AUD = Range("N19").Value
it returns an error when I try to enter it. Is there a brave soul which a good eye for errors that might be able to shine some light on the error. Currently it appears the error centers around the MONTH( ) portions of the function. But each embedded function is able to stand alone and I can't imagine why they won't work together.
I am struck in using IF /AND in nested function as follows,
A1B1C1D1E1F1G1 1 3 5 7 9 32 =IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),"")) (Above, A1 to >G1 are cell address , in exact rows are actual values)
I have following snippet of code. it is very simple.
Code: Sub GetDatafromXmlToTemp() Dim str As String Sheets("sheet1").Select desc = WorksheetFunction.Match("FAMILY_ID", Rows("1:1"), 0) ' gives column number for ex 4 for "D"
[Code] .....
I am getting error "Argument not optional" in line.
I am getting "Sub or Function not defined" error in the below place of my coding. I have highiglided the code which system did and this was given by one of our commite member only
[Code start here] Windows(Fname).Activate If Not WorksheetExists(Date1) Then GoTo ABC Else
When I type = and then click in the pivot table under group1, I am recieving a #REF error. It strange because when I do the same thing in another group (ie. group 2 or group 3, etc.) in the same pivot table I don't recieve the error?
I have been searching through your forum but I can't seem to find the solution to my problem. I have two sheets: On one sheet in cell b2 I have a validation list whose source is =Indirect(Subgroup) which gives a #ref error. However when I evaluate Subgroup, I get a legitimate range. I have attached an example of what I am trying to do.
I am having problems getting the code right for the WorksheetFunction. I have put a snip of the procedure below.
I have data that is sequentially entered into columns, always in rows 4 to 18 with the column ref increasing by 1 each time new data is entered.
After each instance of data entry into a new column I need to loop through that data and, if the a cell value matches a value in range A1:A200, to place x in column B in the same row as the match in column A. All in Sheet2.
Set cStartcell = Sheet2.Range("IV4").End(xlToLeft) ' goes to last entered column For Each cell In Sheet2.Range("B2:B200") Application.WorksheetFunction.If(Match(Offset.(0, -1), Sheet2.Range.("cStartCell:cStartCell.Offset(15, 0)"),""x"") Next
I have put the problem in bold. whatever I try seems to come up as 'end of statement expected' or 'identifier or bracketed expression expected' errors. When I have managed to get rid of errors the fromula does nothing.
I am setting up a summary sheet that contains =indirect() functions for workbooks that don't exist yet.
I would like some kind of function that returns the =indirect() function correctly if the workbook exists and just a 0 or blank if the workbook doesn't exist.
I would like to have the indirect function in all of cells that as soon as someone creates a workbook it will update the summary sheet.
Please find the attachment in which i have mentioned all the details about the error in VLOOKUP function. I couldn't understand why I am getting that error for that single Vlookup value while others are ok.
This is a function to add the ascii values of a string to give a single value. Initially I wrote this as a Sub routine and it worked fine, but when making it into a function, I get this error. From a little research it appears that you can not use a string as an argument for a function call, yet that defeats the object of this particular function.
The intention of this function is that it works on a name in a given cell and the value (an integer) that is produced is then displayed in another cell, or if using it as a formula, the cell the formula is in.
I simple wrote the work "Hello" in cell A1 the ascii values of these added ignoring any spaces give 500 which is correct.
Have two worksheets in same workbook. First worksheet is "ReArrangedAddr" Which basically has a command button to click to run a "Sub" behind the second worksheet "Orig SH Register". When I click on button on first worksheet, I get error "Compile Error: Sub or Function not defined"
