Asking for a row value to be returned if a string is found to exist in the sheet. Works great if it finds the value but I get the following error when the string isn't found:
Run Time Error '91':
Object Variable or With block variable not set.
Concept code follows. The commented strOCNumOF line contains the value that's found on the sheet. The uncommented line contains a value not found.
Sub find_test1()
Dim intFoundOnCur As Integer
Dim strOCNumOF As String
I am trying to use the .Find method to match a date. In sheet2 I have a range of cells which are formatted to only show the day "dd" (I could format each cell to show (dd-mmm-yy, etc). In sheet1, I have dates which are formatted as "January 7, 2009"
I want to create a VBA find routine which allows me to match the date from Sheet2 (Ranged between cells A1:Z1) with Sheet1. Then output a MsgBox stating "Match found in cell $A$7 of Sheet1" I have tried a formula similar to:
PHP Set FoundCell = Sheets("Sheet1").Range("A1:Z1").Find _ (what:=DateValue("January 7, 2009") ,lookin:=xlFormulas)
I have a UserForm (and associated code) to locate a specific entry in Column 'A' of a spreadsheet and insert a date, initials, and hyperlink to another file.
The basic code works fine, but did not account for the user entering a Job# that was not in the system, so I added an If/Else to account for this... The additional code took the If (Job# not found) route every time... Following many hours of searching this site and variations of the error handling code, I still can not get it to work.
So I'm asking for your assistance to point out why the error handling (based on other successful code found here) is not working for me.
'Insert Link Private Sub CommandButton3_Click()
If TextBox1.Value = "" Then MsgBox "Please Insert a Job#" Exit Sub ElseIf TextBox2.Value = "" Then MsgBox "Please Insert Quoters Initials" Exit Sub ElseIf TextBox3.Value = "" Then MsgBox "Please Insert Quote Date" Exit Sub
The 'Find' part of the code is working, as the correct cell is selected after running the code... but it gives the error message, instead of executing the rest of the code...
If I remove the 'On Error Resume Next', it stops on the find block, where on inspection FindR = Nothing.
So if FindR does = Nothing, how did it manage to select the cell?
I have searched the Forum for help on this error 91 but still cannot figure this out.
Below is a format macro I created. I have several ' Find' routines in here and at the beginning of each one I give it an 'On Error GoTo' type statement. This seems to work fine until it gets to a second error. I have moved various 'Find' routines around and it doesn't matter which order they are in, if there are two things it can't find, it gives the error 91 on the second.
Sub Format_SFDC_Detail_Reports() ' ' Macro to format salesforce.com reports with details. rguest '
On Error Goto errorhandler
Msg = "Do you want to format this report for Landscape (Yes) or Portrait (No)?" Style = vbYesNoCancel + vbQuestion + vbDefaultButton1 + vbSystemModal Title = "Format Report as Landscape?" response = MsgBox(Msg, Style, Title)
If response = vbCancel Then 'Exit the routine Goto last_line: End If If response = vbYes Then format_style = "Landscape" End If If response = vbNo Then format_style = "Portrait" End If
'*This is to the row that contani the target lRow = Worksheets("sheet3"). Range("A3:A3000"). Find(What:=code, LookIn:=xlValues, _ LookAt:=xlPart, _ SearchOrder:=xlByColumns, _ SearchDirection:=xlNext, _ MatchCase:=False, _ SearchFormat:=False).Row
it gives me this msg : subscribpt out of range
here is the whole Private Sub Worksheet_Change(ByVal Target As Range)
Dim code As Variant Dim lRow As Long Dim color As Range Dim discrib As Range Dim price As Range Dim myrange As Range
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
Where: F13 = Employee number Column C on the pivot 156 workbook is where the employee number is based. The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4() Dim r As Range Set r = Range("A1:A6") With Application.FindFormat.Font .Bold = True .Italic = True .Size = 16 End With r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate End Sub
I have a problem with a macro that runs on a command button. When I click the button, I get a 'Run Time Error 1004, Paste mathod of worksheet class failed' The code is as follows:-
The procedure below worked quite happily for two months. Now it (usually, but frustratingly not always) fails, with the following error on the asterixed line:
Paste Method of Worksheet Class Failed
If anyone has the inclination, please could you put me out of my misery and suggest what is going wrong, as I have been trying on and off for two weeks to rectify this. What disheartens me is, as I say, I have had no problems with this procedure up until a couple of weeks ago. It takes the ordering info for a particular day and pastes it into the correct day's sheet on the invoicing spreadsheet. Sometimes, when I re-run the procedure it then works......???
Sub Transfer_To_Invoicing()
Dim answer As Variant, active_workbook As Variant day_num = Range("a127").Value answer = MsgBox("Do you want to transfer " & Weekday(day_num) & "'s figures to the INVOICING SYSTEM now?", vbYesNo) If answer vbYes Then Exit Sub answer = MsgBox("Have you updated the values from the despatch sheets?", vbYesNo) If answer vbYes Then Exit Sub Range("a1:dj129").Copy active_workbook = ActiveWindow.Caption For Each w In Workbooks.............
The error is: Method 'Range' of object '_Global' failed Line it fails on:
Set r = Range("myRange")
Sub LearnCells() Dim r As Range Dim n As Long Set r = Range("myRange") For n = 1 To r.Rows.Count If r.Cells(n, 1) = r.Cells(n + 1, 1) Then MsgBox "Duplicate data in " & r.Cells(n + 1, 1).Address End If Next n
End Sub Questions:
1) 1st Dim statement, is this valid? I still get a little unsure- in the data type lists in the help file, the list file does not list things like Workbook, Worksheet Range. 2) Why is the error ocurring?
The macro is timing out on the ActiveSheet.Paste entry...The funny thing is that a number of us can get the macro to work and several of us are getting this error...I am thinking that it is a setting in excel that is causing this...
I encounter a runtime error '1004' if the "Invoices" sheet is not selected when I run this procedure. The last line of the code is one which is highlighted when I debug.
Sub ProcessData() Dim aiOldRows() As Integer, aiNewRows() As Integer ' Arrays of new/old rows Dim rngRaw As Range 'Data entry area Dim rngInvoices As Range 'Invoices range Dim rngOpenPoint As Range 'Top-left corner of data entry area Set rngOpenPoint = ThisWorkbook.Worksheets("Data Entry").Range("a3") Set rngRaw = Range(rngOpenPoint, rngOpenPoint.End(xlDown).End(xlToRight)) FindNew aiOldRows, aiNewRows, rngRaw InvoiceSequence aiOldRows, rngRaw Set rngInvoices = Range(ThisWorkbook.Worksheets("Invoices").Range("A2"), _ ThisWorkbook.Worksheets("Invoices").Range("A3").End(xlDown).End(xlToRight)) rngInvoices.Sort Key1:=Range("M2"), Order1:=xlAscending End Sub
You'll notice that there are two other procedures (FindNew & InvoiceSequence) being called by this procedure. I don't think those have anything to do with the error, but I can provide the code for those if needed. Oh, and one other secondary question. To declare the ranges rngRaw & rngInvoices I pick the top-left cell of the data and then do:.....................
If InStr( Cells(i, 3).Value, "Other") > 0 Then _ Cells(i, 3).Replace What:="Other", Replacement:=Cells(i, 4).Value
This seems to work fine for the most part. However, if the value in Cells(i, 4) is too long, I seem to get a Run-time error '13': Type mismatch. Is there any way to rework this code so it can replace even if the string in Cells(i, 4).Value is too long?
Private Sub cmdShowdata_Click() Dim Tgt As Worksheet Dim Source As Range Dim wbSource As Workbook Dim cel As Range Dim rng As Range Dim c As Range Dim i As Long Application. ScreenUpdating = False Set Tgt = ActiveSheet Set wbSource = Workbooks.Open("C:Documents and SettingsDesktopStaff Recoed 2") Set Source = wbSource.Sheets(1).Columns(1) With Tgt .Activate 'clear old data Range(.Cells(3, 2), .Cells(200, 5)).ClearContents ' Loop through names in column A For Each cel In Range(.Cells(3, 1), .Cells(Rows.Count, 1).End(xlUp)) If Not cel = "" Then...................
The above vba command which is extract the data from the Other workbooks. It looks for the "Staff 001", "Staff 002"...these parameters to transfer the data to the worksheet. But, the "Staff 001" data must appear twice in each workbooks. If i use the above command, i only can extract the FIRST "Staff 001" average data. But SECOND "Staff 001" average data cannot extract. I know it may be use FindNext method to do this but i am not sure how to write it
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
I'm trying to set the print area on two sheets in the same workbook and it is returning Method 'Range' of object' _Global failed error every time and I can't figure out what code to change to make this error stop happening. here is my
Why I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code: Sub GetData1() Dim SaveDriveDir As String, MyPath As String Dim FName As Variant SaveDriveDir = CurDir MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.