Expand Named Range
Jun 11, 2007I am trying to dynamically manage a named range. As a new column is inserted to the right of the named range, the named range is then expanded/extended by one column to the right.
View 4 Replies
ADVERTISEMENT
Expand Named Range Based On Cell Value
Jun 13, 2008I have a workbook containing two worksheets - Sheet 1 being my "data entry sheet" and Sheet 2 is a sort of summary report containing multiple named ranges (all grouped according to similar values in a cell i.e. all cells containing 1-1 is named GRP1, all cells containig 1-2 is named GRP2). Basically, my workbook looks like this:
Sheet 1
A B C D
1 Lea Female 1-1 Lea Wells
2 Leo Male 1-2 Leo Anderson
Sheet 2
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
Hence, when I enter the data as shown in Sheet 1, Sheet 2 should look like this:
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
3 Lea Wells Female 1-1
4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
6 Leo Anderson Male 1-2
Expand Selected Range
Nov 15, 2009I need help please. Using a macro, I have selected the range C7:C12. Now I need to keep this selection and expand it 18 columns to the right. This would give me a selection of C7:U12.
The original range changes at various times. Some times it might be C7: C452 etc.
I know it's easy, but I can get the code to keep the selection.
Expand Range In Macro
Oct 16, 2007I have a named range. The range includes a block of cells plus one extra row and one extra column. That is so I can insert a new row or a new column and still have them within the range. The last row and column are simply blank. I am trying to figure out how to select the part of the range that excludes the extra row and column, so I can then do a fill-right and fill-left. It seems like this should not be hard but I am getting all gummed up in the syntax. The last line of the following code excerpt produces a run-time error 13 Type mismatch. It compiles, however. (I have omitted some extraneous lines that have no effect on r or rf.)
Dim r As Range
Dim rf As Range
Set rf = Range("TotalFTEByStaff")
Set r = Range(rf.Cells(1, 1), rf.Cells(rf.Rows.Count - 1, rf.Columns - 1))
Expand Active Cell To A Given Range
Aug 20, 2006When i click commandbutton1:
Copy Active cell (columnB), next cell (ColumnC), next cell (ColumnI), next cell (ColumnO) all of which exist in the same row.
I will then paste the values into another sheet in the next available row which i think i have mastered. the cells will be pasted next to each other i.e. instead of column B,C,I,O they will be pasted as column A,B,C,D.
My dilema is i am not sure if you can use multiple cell offsets to perform this or if it is better to use a loop.
Expand Active Cell To New Range
Dec 27, 2006I have some working code that makes a number of changes to an excel report using VBA. Each time I execute the code I am taken to a different point in the excel report (depending on user inputs). What I now need to do is to change the cell selection from a single cell to three cells.
For example, my code may result in cell B100 being the active cell. What I now want to do is change the selection from B100 to the range B100:B103. I would have thought I could write something simple like:
Sheets("Group").Range("ActiveCell:Offset(0, 2)").Select
I have tried every variation of the above but I can't seem to make it run. Where am I going wrong?
Dynamically Expand Range To Create Chart
Jan 21, 2009See the attached example. I have data listed as shown, but need the chart to automatically update whenever a new sales figure is added to the next month. I know you have to use the OFFSET to create dynamic ranges but I can't get it to work horizontally, only if my data is laid out vertically.
View 2 Replies View RelatedExpand Range To Include Non-contiguous Column?
Apr 1, 2014How to make the below selected range, which represents column Q, also include column A?
Range(ActiveCell, ActiveCell.End(xlDown)).Select
Determining If Cell Is Part Of Named Range And What That Named Range Is?
Aug 16, 2014Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
Pivot Table - Automatically Expand Range Selection Of Data
Oct 12, 2002Possible to get a pivot table to automatically expand the range selection of data as it grows. I have a worksheet that grows daily and I am running a pivot table from this. If I refresh the pivot table it doesn't pick up new data unless i change the range or i have a huge range selected in the first place. Problem is if i select a huge range then the grouping options i am using won't work correctly.
View 5 Replies View RelatedExcel 2010 :: Expand Text Number Range Into Separate Cells
Feb 20, 2014Using Excel 2010.
I have data in excel which looks like this:
Column 1 has 1200-1209,1300-1350,1523-1563
Column 2 has 1400-1409,1600-1650,1823-1863
I would like to take the range of e.g. 1200-1209 and have excel put 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 into separate adjacent cells for me. And be able to do this for each column/cell of data I have like this.
Column 1 1200
Column 2 1201
Column 3 1202
Like that only. Is it possible?How?
Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This
Jun 2, 2006I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedMaking Named Range The Last Active Value Used Within Another Named Range?
Jul 19, 2013I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
Countif- Use A Named Criteria As Well As A Named Range
Oct 25, 2009if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedCombine Two Named Ranges Into 3rd Named Range
Mar 14, 2013Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
Copy/Paste Cell To Named Range Named In Adjacent Cell
Sep 4, 2007I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
Find Matched Value In A Range For Named Cell Then Copy Range Cells Below
Aug 6, 2013I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Dynamic Named Range Sort Including Cells Outside Defined Range
Apr 3, 2008Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
VBA To Get Average Of Range Of Cells Based On Named Range In Different Column
Apr 10, 2013I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
Creating Named Range Taking Avg To Date Of Dynamic Range
Jul 15, 2014I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedGet The Range Address Of A Dynamically Named Range That Refers To A Formula In VBA
Aug 10, 2008I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
Stop Graph From Changing Named Range To Formula Range
Sep 8, 2006I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
Match Named Range To Range/Cell Address
Aug 25, 2006I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedConvert Dynamic Range To Static Named Range
Sep 13, 2007My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
Assign Named Range To A Vba Range Variable?
Jan 25, 2013I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
Named Range Returns Wrong Range
May 16, 2014OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using
=OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using
=OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
Dynamic Range Used Named Cell Range
Jul 7, 2014Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
Sum Range Using 1 Column Of Named Range As Criteria
Dec 21, 2006how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
I Named A Range With The Name Box- Change The Range??
Jul 14, 2009I'll attach an example.. I just can't seem to figure out how to update the range if I have already named it something using the Name Box to the left of the Formula bar.
View 2 Replies View RelatedNamed Range In Naming Another Range
Aug 6, 2006How to you reference a named range in naming another range? What is the syntax?
I have a dynamic range, and I want a second dynamic range to start in relation to the last cell of the first range.