Named Range In Naming Another Range
Aug 6, 2006How to you reference a named range in naming another range? What is the syntax?
I have a dynamic range, and I want a second dynamic range to start in relation to the last cell of the first range.
ADVERTISEMENT
Determining If Cell Is Part Of Named Range And What That Named Range Is?
Aug 16, 2014Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
Making Named Range The Last Active Value Used Within Another Named Range?
Jul 19, 2013I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
Find Matched Value In A Range For Named Cell Then Copy Range Cells Below
Aug 6, 2013I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Dynamic Named Range Sort Including Cells Outside Defined Range
Apr 3, 2008Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
VBA To Get Average Of Range Of Cells Based On Named Range In Different Column
Apr 10, 2013I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
Creating Named Range Taking Avg To Date Of Dynamic Range
Jul 15, 2014I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedGet The Range Address Of A Dynamically Named Range That Refers To A Formula In VBA
Aug 10, 2008I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
Stop Graph From Changing Named Range To Formula Range
Sep 8, 2006I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
Naming A Range In VBA
Jun 6, 2007I want to use the range in this code that works fine in one work book from sheet to sheet...
But i need it to run across 2 workbooks that are both open at the same time... The data its bringing back will be in a seperate workbook.
Sub zzzz()
Sheets("Sheet2").Select
Range("A3:M16").ClearContents
c = 3 'Paste Range Return Test
x = Worksheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row 'data source
For a = 1 To x
If Worksheets("sheet1").Cells(a, 3) = Worksheets("sheet2").Range("a1") Then
For b = 1 To 20
Cells(c, b) = Worksheets("sheet1").Cells(a, b)
Next b
c = c + 1
End If
Next a
'Range("C3:C15,F3:F15,I3:I15").Select
'Selection.Delete Shift:=xlToLeft
Range("A1").Select
End Sub
Naming A Range With Vba
Jan 31, 2007A userform listbox places names in a column in Sheet2, starting with cell E1 and subsequent transfers from the listbox (which is multiselect) going to F1, G1 etc. There will be between 6 and 15 names in each case.
A seperate textbox is used to assign a number to each multiselection, this number is added to "Div" and placed in row 22 of the column to which the multiselection is transfered.
The text in this cell is used for other things later but I also want to use it to Name the range to which it refers. This name is then immediately used to populate another listbox in the userform, and will be used repeatedly later on in the project.
Here is the relavant snip of code that I have been trying to get to work but I get 'object required' for the ActiveWorkbook.Names.Add.......... line. I did manage to get rid of that once (can't recall how!!) but then the ListBox2,RowSource gave an error.
Set DvNm = Sheet2.Range("IV1").End(xlToLeft).Offset(21, 0)
Set Rngc = Sheet2.Range("IV1").End(xlToLeft)
Set Rngp = Sheet2.Range("D65536").End(xlUp).Offset(1, 0)
DvNm.Value = "Div" & TextBox1.Value
Range(Rngc, Rngc.Offset(15, 0)).Copy
Rngp.PasteSpecial (xlPasteValues)
Application.CutCopyMode = False
ActiveWorkbook.Names.Add Name:=DvMn.Value, RefersToR1C1:="Range(Rngc, Rngc.Offset(15, 0))"
Match Named Range To Range/Cell Address
Aug 25, 2006I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedConvert Dynamic Range To Static Named Range
Sep 13, 2007My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
Naming Pasted Range
Mar 26, 2008After pasting a Range and while the Range is still selected, I would like to Name it. May I have some assistance with the proper statement?
View 9 Replies View RelatedNaming A Dynamic Range By VBA
May 16, 2006I am making a simple database worksheet for the junior. The first thing we need to re-define the new "size" of the database to do some future calculations. I write some code in workbook open to initiate the name area:
Worksheets("Inventory").Activate
maxrow = 0
maxrow = Range("a7"). CurrentRegion.Rows.Count
'Range("A7").Select
Range(Cells(8, "N"), Cells(maxrow, "N")).Name = "tbl_left"
when the junior re-open the workbook after closed, the size of the database
does not growth to a new area even junior add rows of data before close. It seems the currentregion does not work, I've tested it in VBE by press " F8".......
Offset Range Naming
Jun 15, 2006= OFFSET(CustomerInfo!$A$9,0,0, COUNTA(CustomerInfo!A:A),1)
for a "dynamic" range name...i like the concept, but my data validation in a cell that references this "dynamic" range name (with the offset function) doesn't recognize all the values in the range
(when i just range name it, the data validation sees all the names, but not all when i use the offset...)
Naming A Selected Range
Mar 15, 2007I am trying to name a selected range in VBA in order to use it in a vlookup table. Code I have so far is as follows:
ActiveSheet.Name = TextN
Range("c9"). CurrentRegion.Select
Call formatting
ActiveWorkbook.Names.Add Name = "formTextN", RefersToR1C1 = Worksheets(TextN) & "!" & "r9c2:r45c13"
The formatting works, but the selection does not get named.
Dynamic Range Table Naming
Oct 12, 2013I am having a hard time creating my ultimate gradebook. Right now, I am able to hide a SPECIFIC table on a SPECIFIC worksheet using the following code on a macro button:
VB : Sub HideRow()Range("Table2[#All]").EntireRow.Hidden = True End Sub
The problem is that this sheet will be a template and as a new user inserts a new sheet, I would like to copy and paste this template to each new sheet. Since the Table values change with each new sheet, code wont work on the new tables. How I can name each new sheets table "Class Data", and the macro button to hide will work on each respective sheet?
Naming A Range Begining With A Number?
Jan 22, 2009Is there a way to name a range beginning with a number? It doesn't accept it. Is there a way around this? range name examples: 2DBSUS 3DBSUS
View 2 Replies View RelatedNaming A Range Of Variable Length
Feb 5, 2007I have a range of data starting in C18, C17 is a label (DivsUsed) the number of rows can range from 1 to a few hundred.
I used the code below to name C18 onwards as a named range with the name DivsUsed and then to use this as a RowSource for a ListBox.
Private Sub UserForm_Initialize()
Dim rangeToName As Range
'Sheet2.Range("C18", Range("C65536").End(xlUp)).Name = "DivsUsed" Tried this too
Set rangeToName = Sheet2.Range("C17", Range("C65536").End(xlUp))
rangeToName.CreateNames Top:=True
ListBox2.RowSource = "DivsUsed"
TextBox2.Value = Sheet2.Range("F2").Value 'This works ok
End Sub
Both tries, and anything else I have tried, give the error " Method 'Range' of object _Worksheet failed".
Conditional Average, Naming A Range
Feb 5, 2007i'm very new to excel formulas & statistics in general. i only need to calculate averages but am having trouble naming the range in my formulas
in the example below, i want to use the first column to determine the range of data for the mean calculation.... so, I am seeking the average of just the numbers which correspond w/ A only. Similarly, I will then want an average for numbers corresponding to B, and then to C, etc etc...
Assign Named Range To A Vba Range Variable?
Jan 25, 2013I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
Named Range Returns Wrong Range
May 16, 2014OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using
=OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using
=OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
Dynamic Range Used Named Cell Range
Jul 7, 2014Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
Sum Range Using 1 Column Of Named Range As Criteria
Dec 21, 2006how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This
Jun 2, 2006I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedNaming Range With Integer Or String Variable?
Mar 13, 2012I am trying to name a Range in VBA with the following Case statement.
Select Case counter
Case "2": Set Wk(numWeeks) = Range("P1:Q136")
ActiveWorkbook.Names.Add Name:="Wk" & numWeeks, RefersTo:=Wk(numWeeks)
I have many more cases and have defined Wk(5) as a Range. What I am really after it is possible to to name the range using something similar to the code above that uses a predefined variable in the naming process.
Naming Range By Finding Text And Then Using Offset?
Mar 23, 2012I have a large file where I want to name about 30 ranges. Initially I had done this using the range addresses and it worked well, but I continue to modify the spreadsheet and add and delete rows, so I need to go back into the code and change the ranges manually. I know there has to be a better way.
What I wanted to try doing was finding some specific text. That text (in all the ranges) is actually one column to the left and 33 rows below where I want to start the named range. Additionally the named range will be a 10 x 33 range. For example, if the data starts in B1, the data to be named will be in B1:K33 and the search title will actually be in A34. Hopefully that's clear...
My original code looked like this:
Code:
ActiveWorkbook.Names.Add Name:="[MyRangeName]", RefersTo:=ActiveSheet.Range("B2:K33")
I was attempting to us the Find function with this code, but I can't seem to figure out how to tell it to look for the text (that would be in A34) and then name the range that would be offset by (-33,1) and then name the entire range.
Naming Dynamic Range Of Cells Based On Heading
Apr 15, 2014I need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
=========================
Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If Not aCell Is Nothing Then
aCell.Offset(1, 0).Select
========================================
That's how I select the first cell in the range. Not sure how to select the whole range and name it ..
ActiveCell.End(1xDown) ?
Countif- Use A Named Criteria As Well As A Named Range
Oct 25, 2009if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View Related
