Expand Named Range Based On Cell Value

Jun 13, 2008

I have a workbook containing two worksheets - Sheet 1 being my "data entry sheet" and Sheet 2 is a sort of summary report containing multiple named ranges (all grouped according to similar values in a cell i.e. all cells containing 1-1 is named GRP1, all cells containig 1-2 is named GRP2). Basically, my workbook looks like this:

Sheet 1
A B C D
1 Lea Female 1-1 Lea Wells
2 Leo Male 1-2 Leo Anderson

Sheet 2
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1

4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2

Hence, when I enter the data as shown in Sheet 1, Sheet 2 should look like this:

A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
3 Lea Wells Female 1-1

4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
6 Leo Anderson Male 1-2

View 4 Replies


ADVERTISEMENT

Expand Named Range

Jun 11, 2007

I am trying to dynamically manage a named range. As a new column is inserted to the right of the named range, the named range is then expanded/extended by one column to the right.

View 4 Replies View Related

Expand Active Cell To A Given Range

Aug 20, 2006

When i click commandbutton1:

Copy Active cell (columnB), next cell (ColumnC), next cell (ColumnI), next cell (ColumnO) all of which exist in the same row.

I will then paste the values into another sheet in the next available row which i think i have mastered. the cells will be pasted next to each other i.e. instead of column B,C,I,O they will be pasted as column A,B,C,D.

My dilema is i am not sure if you can use multiple cell offsets to perform this or if it is better to use a loop.

View 4 Replies View Related

Expand Active Cell To New Range

Dec 27, 2006

I have some working code that makes a number of changes to an excel report using VBA. Each time I execute the code I am taken to a different point in the excel report (depending on user inputs). What I now need to do is to change the cell selection from a single cell to three cells.

For example, my code may result in cell B100 being the active cell. What I now want to do is change the selection from B100 to the range B100:B103. I would have thought I could write something simple like:

Sheets("Group").Range("ActiveCell:Offset(0, 2)").Select

I have tried every variation of the above but I can't seem to make it run. Where am I going wrong?

View 2 Replies View Related

Expand X Axis Based On Cell Values

May 15, 2014

I want to create a bar chart so that the X axis scale is based the value in the reference cells. For example, a table created for running profile as follow:

The data table # of minutes2221 pace (MPH)4.06.08.04.0

The chart I need to produce. The data has 4 records, but the chat needs to show bars of total number of minutes. Picture1.png How do I do it?

View 2 Replies View Related

Display Named Range Contents Based On Text In Cell

Aug 24, 2009

I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.

What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.

I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.

So it's almost like a copy and paste function I'm after, where:

If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.

DON'T want to use a PivotTable.

View 9 Replies View Related

Expand A Cell Formula Based On The Entry Of Several Other Cell Entries

Jul 6, 2014

=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))

I am currently using the above formula and need to make an addition to it.

If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30

View 5 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

VBA To Get Average Of Range Of Cells Based On Named Range In Different Column

Apr 10, 2013

I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.

I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.

View 1 Replies View Related

Define Range Based On Named Row And Column

Jul 26, 2006

I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.

Sub LastRowCol()
Dim intLastRow As Integer
Dim intLastCol As Integer
Dim ws As Worksheet

For Each ws In Worksheets

intLastRow = ws.Cells.SpecialCells(xlCellTypeLastCell).Row
intLastCol = ws.Cells.SpecialCells(xlCellTypeLastCell).Column

View 3 Replies View Related

Expand Selected Range

Nov 15, 2009

I need help please. Using a macro, I have selected the range C7:C12. Now I need to keep this selection and expand it 18 columns to the right. This would give me a selection of C7:U12.

The original range changes at various times. Some times it might be C7: C452 etc.

I know it's easy, but I can get the code to keep the selection.

View 6 Replies View Related

Expand Range In Macro

Oct 16, 2007

I have a named range. The range includes a block of cells plus one extra row and one extra column. That is so I can insert a new row or a new column and still have them within the range. The last row and column are simply blank. I am trying to figure out how to select the part of the range that excludes the extra row and column, so I can then do a fill-right and fill-left. It seems like this should not be hard but I am getting all gummed up in the syntax. The last line of the following code excerpt produces a run-time error 13 Type mismatch. It compiles, however. (I have omitted some extraneous lines that have no effect on r or rf.)

Dim r As Range
Dim rf As Range
Set rf = Range("TotalFTEByStaff")
Set r = Range(rf.Cells(1, 1), rf.Cells(rf.Rows.Count - 1, rf.Columns - 1))

View 5 Replies View Related

Copy Data Over Based On Reference And Named Range?

Jul 22, 2014

I got a very technical sheet which needs your experience to work.

open the attached file below to see the workbook.

It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"

On "RESULT" Cell (O11) is where the person would put a Reference.

This reference is then checked on the "INPUT" sheet column A.

From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).

But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.

In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.

I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.

I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.

View 1 Replies View Related

Create Named Range Based On Column Values

Dec 30, 2007

I have a worksheet that has hourly data. So Column C of this worksheet looks like

1
1
1
1
2
2
2
3
3
3
3
3
3

What I want to do is, given an hour h, automatically create a named range that contains all the rows such that the value of Column C is equal to h.

View 9 Replies View Related

Automatically Create Named Range Based On CheckBox

Jan 20, 2008

I am quite new on this forum.

I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?

I have multi checkbox in column F,

So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.

I want to entry data in the Range H14:P? by this code

Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub

View 9 Replies View Related

Dynamic Named Range Based On Last Date In Column

Mar 9, 2008

I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.

View 5 Replies View Related

Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies View Related

Dynamically Expand Range To Create Chart

Jan 21, 2009

See the attached example. I have data listed as shown, but need the chart to automatically update whenever a new sales figure is added to the next month. I know you have to use the OFFSET to create dynamic ranges but I can't get it to work horizontally, only if my data is laid out vertically.

View 2 Replies View Related

Expand Range To Include Non-contiguous Column?

Apr 1, 2014

How to make the below selected range, which represents column Q, also include column A?

Range(ActiveCell, ActiveCell.End(xlDown)).Select

View 4 Replies View Related

Copy Named Range Data To Worksheet Based On Dropdown Or Combobox

Feb 10, 2013

I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.

Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.

View 9 Replies View Related

Filter OLAP Pivot Table Based On Named Range In Another Worksheet

Mar 14, 2012

I have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.

Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.

In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.

Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...

'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem

[Code]....

View 4 Replies View Related

Match Named Range To Range/Cell Address

Aug 25, 2006

I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?

View 4 Replies View Related

Pivot Table - Automatically Expand Range Selection Of Data

Oct 12, 2002

Possible to get a pivot table to automatically expand the range selection of data as it grows. I have a worksheet that grows daily and I am running a pivot table from this. If I refresh the pivot table it doesn't pick up new data unless i change the range or i have a huge range selected in the first place. Problem is if i select a huge range then the grouping options i am using won't work correctly.

View 5 Replies View Related

Dynamic Range Used Named Cell Range

Jul 7, 2014

Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.

Range("DataSummary),(??,??) doesn't work.

View 1 Replies View Related

Excel 2010 :: Expand Text Number Range Into Separate Cells

Feb 20, 2014

Using Excel 2010.

I have data in excel which looks like this:

Column 1 has 1200-1209,1300-1350,1523-1563
Column 2 has 1400-1409,1600-1650,1823-1863

I would like to take the range of e.g. 1200-1209 and have excel put 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 into separate adjacent cells for me. And be able to do this for each column/cell of data I have like this.

Column 1 1200
Column 2 1201
Column 3 1202

Like that only. Is it possible?How?

View 4 Replies View Related

Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This

Jun 2, 2006

I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...

View 2 Replies View Related

Named Range/cell

Nov 24, 2008

I want to go to places defined in a sheet.

the first works on my computer but not on another.

The second two do not work yet but think i am on the right track

View 10 Replies View Related

For Each Cell In Named Range

Aug 27, 2009

i'm looking at copying the values in a named range to a certain set of Cells when i alter a drop down.

i know how do the majority all i'm stuck with is create a "For each" loop with the named range like so:

View 12 Replies View Related

Named Range In A Cell

Jun 26, 2009

Might it be possible to revise the parameters of a range name via the contents of a cell?

For instance:

A1 B1

Date A1:A10

If I change the contents of B1 to A1:A15 can that redefine the parameters of the range named Date from A1:A10 to A1:A15?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved