Export Variable Range As Txt File. Ommit Error Cells

Oct 30, 2006

In the attached file, I have two columns (A and B) and the column A will vary within the range from A4:A104 and column B will vary according to A. Nevertheless column A has #N/A error which is mandatory for chart. So I am looking for a macro to do the following:

Start with cell B4 and go until value exsists for "B" (let me say for eg. B40) and select the range A4:B40 and ask the user to give name for the export file export only that selection as a tab delimited txt file.

http://www.cpearson.com/excel/imptext.htm

I looked in to the above article. But i have trouble in selecting dynamic range and to avoid #N/A error in the range.

View 4 Replies


ADVERTISEMENT

Automate Export For A Range Of Cells To Text File

Oct 30, 2008

I'm trying to automate the process of exporting a range of cells to a text file. I think the Print# command will work because I don't want the quotes at the end of each line. Each range of cells will be a separate text file, and I want to save and name the file according to the column it's in. This bit of code from dominicb seems to be what I'm looking for, in principle.

View 5 Replies View Related

Error 1004 Using Variable Range

Dec 29, 2013

The following five lines of code are inside a loop in which i goes from 1 to 600. When i was 594 a condition allowed these lines to be executed. (The last was in my original code and the others were just added to try to figure out why the last had a problem.) The first three work and the last two trigger error 1004 "Application-defined or object-defined error." All I am trying to do is to fill some cells with a dummy value. It doesn't matter whether I try to fill with 1 or with "1".

Worksheets("Volumep").Cells(5, i+3) = 1
Worksheets("Volumep").Range("vv5:vv104").FillDown
Worksheets("Volumep").Range("vv5:vv104").Value = 1
Worksheets("Volumep").Range(Cells(5, i+3), Cells(104, i+3)).FillDown
Worksheets("Volumep").Range(Cells(5, i+3), Cells(104, i+3)).Value = 1

Whether or not there is a different or better technique for filling cells, the range specification is the real issue I am trying to solve. The referencing issue produces the same error later in the module where more complicated work is being done.

Bonus question: is there a general prohibition forbidding the mixing of range("a1") and cell(1,1) styles of addressing in the same line of code? (Not a factor in the immediate problem but related to previous problems I have encountered)

View 2 Replies View Related

Error Setting Range Variable

Aug 8, 2006

i have compiled a multipage using some borrowed code and some code i have written myself. most of it works, but i have a problem populating listbox2.the error is in Private subCmbFindAllJobNo_Click(). i have put h1 tags around the line of code which shows the error when i debug. this code works ok as a stand alone, so i suspect i have done something wrong in the userform initialise.

Option Explicit
Dim rng As Range
Const FirstRow As Long = 2
Dim r As Long
Dim ans As Variant
Dim MyArray(100, 4)

Public MyData As Range, c, d As Range

Private Sub cmbAmend_Click()

Application. ScreenUpdating = False
Set c = Worksheets("ENTRY SHEET").Range("b4").End(xlUp).Offset(3, 0)
c.Value = Me.DTPicker1.Value
c.Offset(1, 0).Value = Me.TextBox1.Value
c.Offset(2, 0).Value = Me.TextBox2.Value ..........

View 9 Replies View Related

Variable In Range.Formula Causes 1004 Error

Aug 3, 2006

The problem lies in the following line

Range(Cells(1, a), Cells(b, a)).Formula = _
"=(rc[-1]-" & min & ")/(" & max & "-" & min & ") "

When it is executed i get the 1004 error ("application-defined or object-defined error)...
min and max are defined (as worksheetfunction.min and max of a selection), and their values are correct. The problem seems to lie in the max variable, namely if i simplify the formula to just

Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & min & ")"

it works ok, but if it is

Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & max & ")"

I get the error.
I am completely baffled considering both variables are defined in the same way i.e.

min = Application.WorksheetFunction.min(Selection)
max = Application.WorksheetFunction.max(Selection)

View 9 Replies View Related

Error Settting Variable To Range On Another Worksheet

Nov 28, 2006

I am trying to run a script from a command button on another sheet in the same workbook. all the variables have been defined. I get a "select method of range class failed" message when I run the code. I believe that i am not getting "closed trades" to be the active worksheet.

excerpt of code

'Clear out existing data
iRow = 2
Set wks = ThisWorkbook.Worksheets("Closed Trades")
wks.Activate

lrow = Cells(65536, 1).End(xlUp).Row
Set Rng = wks.Range(Cells(iRow, 1), Cells(lrow, 17)) ' this row errors out
Rng.Clear
Set Rng = Nothing

View 5 Replies View Related

Subcript Out Of Range Error Setting Worksheet Variable

Sep 13, 2006

Subcript Out Of Range Error Coming Now For The Code Which Works For Me Before


Sub WHideRows()

Dim rRange As Range, rCell As Range
Dim strVal As String

Set rRange = Worksheets("WIED PROBLEM WELLS").Range("A11:A110")

For Each rCell In rRange
strVal = rCell(1, 3) & rCell(1, 4) & rCell(1, 5) & rCell(1, 6) & rCell(1, 7) & rCell(1, 9)
rCell.EntireRow.Hidden = strVal = vbNullString
Next rCell

End Sub

i am using the code above to hide the rows which doesn't have any values in all the following Cells 3,4,5,6,7 & 9 or Unhide the rows if there is value in any 1 of the following cells 3,4,5,6,7 & 9 from row number A11 to A110.

The same code works for me before. But now the code is not working. It says below the error message

Run-time error '9':..................

View 9 Replies View Related

Object Required Error Setting Range Variable

Aug 22, 2007

code is getting an error on the bold line below. My error message is run time error 424 - object required.....

View 7 Replies View Related

Export Data From A Template File To Total List File Using Macro In Template File

Dec 18, 2012

I have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):

Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.

It's the Macro 2 I want to edit.

I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.

Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.

For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.

The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)

File and Folder info:

To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate

Total list file name: total_list.xlsx
Total list file location: \servershared otal

Selection info:

The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).

When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.

View 1 Replies View Related

Ommit Headings From CurrentRegion

Nov 22, 2006

Assuming I have a data martix which is X* Y. I want to store a range that is at Row Z. I have named a single cell at Row Z as "dataStart". How can I store that Row without the header?

View 5 Replies View Related

Return Nth Largest Value But Ommit Zeros & Ties

Oct 4, 2009

I am trying to use the Large function to pull out First, second and third highest values in an array. problem is with ties and zeros it returns the wrong value.

View 4 Replies View Related

Export To Text File - One File Per Row?

Jul 27, 2012

how to automate exporting a spreadsheet to text files so that each row in the spreadsheet becomes one text file (named from the first column)?

View 3 Replies View Related

Save Export Specific Worksheet Error

Jan 23, 2010

I am trying to run a macro that will export the 'Results' WS & ask the user where he/she wants the .xls to be saved, though when I click 'Save' nothing happens.

In additons in the save as part it has the WB's name(and full extention) is there a way to make this blank or to have something in it? I.e the WS's name?

View 10 Replies View Related

How Export File To .txt

Sep 4, 2008

How can I export an Excel file to .txt following a pre-defined layout plus adding a space between the values of the columns?

Example

These are the columns:
NAME: 04 DIGITS
LOCATION: 03 DIGITS
FINAL LOCATION: 03 DIGITS
ZONE: 02 DIGITS
FINAL SUBZONE: 04 DIGITS
CODE: 02 DIGITS
"WHITE SPACE": 39 DIGITS

View 9 Replies View Related

2007 Macro: Run-time Error 91:Object Variable Or With Block Variable Not Set

Feb 20, 2009

I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...

The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.

View 9 Replies View Related

Export Chart As Image: Run-time Error 1004

Aug 18, 2006

I have a function that exports charts as PNG images, that is suddenly broken. The function is very basic: ActiveChart.Export fileName:=chartFileName, FilterName:="PNG"

Now I can guarantee that chartFileName contains a complete path, with filename and extension, so this is not the problem. I am getting the following error: Run-time error '1004': Method 'Export' of object '_Chart' failed. The only thing I can think of is that I had Office 2007 Beta installed alongside Office 2003, as mentioned by Andy in the following thread: Exporting Charts as GIF - Error. I have uninstalled Office 2007 Beta, and run the repair function of the Pffice 2003 install, but still I have this problem.

View 7 Replies View Related

Lookup To Set Up Export File

Mar 21, 2009

I have a spreadsheet that my field workers use to collect data.(See 'Capture Form'). On the main worksheet they use drop-down lists to enter the data. These lists are drawn from named ranges on other worksheets. In the column next to these ranges are the respective ID numbers.

I want to set up a worksheet ('Export') that mirrors the capture worksheet 'Capture Form' but only includes the ID numbers so that I can import into my Access db. I'm sure it's probably just a simple worksheet function but I don't know how to do this.

View 3 Replies View Related

Export Large File

Oct 30, 2002

I have a database of 75000 rows in text format which has to be converted to excel, but the limitation in excel is only 65536. hence, I want to a macro that will copy the 1st 65536 rows into the 1st sheet in excel. The remaining rows should be copied into the second sheet. I know that it can be done with access. but i dont want to use access.
I have got a code to do this, but it takes much too long. if the code could be modified to make it faster,


Sub LargeFileImport()

'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g.

View 9 Replies View Related

Getting A #name? Error In Certain Cells For A File That Is Located On Our Domain Controller

Nov 4, 2009

I am getting a #name? error in certain cells for a file that is located on our domain controller. This file will work only on certain computers. I did not make the file, but since it works on certain computers, I can only assume that it is not a function error. We are running Office 2003.

View 2 Replies View Related

Excel 2007 :: Object Variable Or With Block Variable Not Set Error

Feb 28, 2013

I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.

But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"

How to set the file which got opened from the folder to wbk variable.

Code:
Sub dataintoonesheet()

Dim i As Integer
Dim jk As Integer
Dim j As Integer

Dim rowstart As Integer
rowstart = 3

[Code] .......

View 9 Replies View Related

Macro Error Message (object Variable Or With Block Variable Not Set)

Jul 7, 2009

When i try to run the code below i get the error message - object variable or with block variable not set-

Sub REFRESHXX()

'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing

With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With

'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar

'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1

End Sub

View 9 Replies View Related

Runtime Error 91 Object Variable Or With Block Variable Not Set

Mar 24, 2014

I am getting error in Set MyRange

[Code] .....

View 3 Replies View Related

Object Variable Or With Block Variable Not Set Error With Macro

Mar 12, 2009

I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.

View 7 Replies View Related

Run Time Error 91 Object Variable Or With Block Variable Not Set

Oct 7, 2009

I am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have

shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value

View 3 Replies View Related

Two Macros - Object Variable Or With Block Variable Not Set Error

Jul 11, 2014

I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.

Here's the code

Code:

Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer

[Code]....

View 2 Replies View Related

Runtime Error 91, Object Variable Or With Block Variable Not Set

Feb 6, 2009

This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.

Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh

End Sub

View 9 Replies View Related

Debugging Error: Object Variable Blocked Variable Not Set

Nov 9, 2009

I am getting an error at this line:

Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))

Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................

View 9 Replies View Related

Run Time Error 91, Object Variable Or With Block Variable Not Set

Jan 14, 2007

Function Find_Range(Find_Item As Variant, _
Search_Range As Range, _
Optional LookIn As Variant, _
Optional LookAt As Variant, _
Optional MatchCase As Boolean) As Range
Dim c As Range
If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas
If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole
If IsMissing(MatchCase) Then MatchCase = False
With Search_Range
Set c = .Find( _
What:=Find_Item, _
LookIn:=LookIn, _
LookAt:=LookAt, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=MatchCase, _ ........................

Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks

View 5 Replies View Related

Export File Names To Excel?

Nov 15, 2010

i would like to export the sub-directory file names to excel.

View 5 Replies View Related

Export As PDF (with Specific File Name) Not Working?

Aug 11, 2014

I have this code (not sure from which thread) which can export my worksheet with specific file name & folder (according to date and part type). I tried to put it in my worksheet but it's not working.

[Code]....

and it's highlighted at following part

[Code] ....

I received this error from the message box : Run-time error '1004'

Document not saved. The document may be open,or an error may have been encountered when saving.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved