Getting A #name? Error In Certain Cells For A File That Is Located On Our Domain Controller
Nov 4, 2009
I am getting a #name? error in certain cells for a file that is located on our domain controller. This file will work only on certain computers. I did not make the file, but since it works on certain computers, I can only assume that it is not a function error. We are running Office 2003.
View 2 Replies
ADVERTISEMENT
May 31, 2013
loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
View 4 Replies
View Related
Jan 30, 2013
How to pull data with a VLOOKUP to a file located on a Server.
My big problem is not understanding the syntax of the Server location. I've provided it below (obviously with some character changes).
I have a file located on my Hard Drive. I need to perform a VLOOKUP from A2 on this spreadsheet. The File on the Server is called "LookupTest.xls". The Range of Data is from Sheet 1 and is from A2:C4 and I need to pull the data from column C depending on what is selected from A2 from the file on my HD. I understand how to use VLOOKUP, just not when I'm pointing to another file on a Server.
Server mapping from Windows Explorer:
rbbabc$ on 'RP17409 - ABC Database (AHSSRVVN678.tge.com)'
Again, that server mapping is fake, as I changed it, but this is how it looks on Windows Explorer.
I'm trying to keep a master file of Data on a spreadsheet found on a server so that one master file can be updated, and several other tools pull from that Master File on VLOOKUP, Validation Lists, etc.
View 4 Replies
View Related
Apr 14, 2013
I need code to print a file located in my C drive.
View 6 Replies
View Related
Jul 25, 2014
I am looking to automate our daily sales report.
I am aware of the windows task scheduler.
However, I'd like for this report to run and be sent out very early in the morning (5AM) before I'm even at work.
My computer is usually off because it's with me as I'm commuting into the office.
These files are saved out on our network drive.
Is there a way I can "open" the file and run the macro I have that builds my sales reports with my computer being off?
View 2 Replies
View Related
Nov 22, 2011
Is there a way to reference the controller that triggered a subroutine??
like the ME or ThisWorkbook, but for controllers on userforms.
View 2 Replies
View Related
Feb 7, 2008
I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
View 9 Replies
View Related
Nov 2, 2009
i'm trying to automatically create hyperlinks in some cells from mail addresses located in another column. this is what came out:
View 2 Replies
View Related
Jan 27, 2009
I have a string variable which is dynamically populated with a URL value. Some examples of the URL are:
http://cartoondoor.blogbus.com/index_5.html
http://asirir.blogspot.com/
http://neuronets.chat.ru/appendix.html
I'd like to be able to extract the domain--meaning the string value between // and /.
View 2 Replies
View Related
Feb 23, 2014
I have a long url and I need only the root domain in the url.
for example:
[URL] .....
[URL] .....
[URL] .....
[URL] .....
[URL] .....
View 2 Replies
View Related
Oct 30, 2006
In the attached file, I have two columns (A and B) and the column A will vary within the range from A4:A104 and column B will vary according to A. Nevertheless column A has #N/A error which is mandatory for chart. So I am looking for a macro to do the following:
Start with cell B4 and go until value exsists for "B" (let me say for eg. B40) and select the range A4:B40 and ask the user to give name for the export file export only that selection as a tab delimited txt file.
http://www.cpearson.com/excel/imptext.htm
I looked in to the above article. But i have trouble in selecting dynamic range and to avoid #N/A error in the range.
View 4 Replies
View Related
Sep 24, 2007
I need to sort email address list by domain name instead of just ascending and decending,
View 9 Replies
View Related
Aug 7, 2013
I have a very large dataset (~5000 points in a 2D array) which I need to plot and fit a linear trendline to. There are 90 subjects each of which has a daily binary event checked over its lifespan. eg:
Day: 1 2 3 4 5 6 7 8 9 10
subj 1 0 1 0 0 0 (dead)
subj 2 1 1 1 0 1 0 1 0 0 0(dead)
subj 3 0 0 1 0(dead)
I simply averaged the number of events per day per subject and plotted them but near the long-lived end of the data the variability gets really high. I have normalized the lifespan for each subject such that instead of the event occurring on day 10, it occurred at 0.2 of its total lifespan (dying on day 50). Now that my data is in this format, I want to create an average for all subjects over the domain 0-1 representing birth-death.
The trouble is that now each subject's domain has different intervals between points (eg. 0.1 for subjects living 10 days and 0.006993 for those living 143 days). How to now space out the cells (somewhat) automatically so I can average the columns? My array is 90 x 150 so doing it manually is not really possible. Or, alternatively, is there a way to create a continuous average rather than a discrete one? Some sort of function that goes through each infinitely small (or even a discrete really tiny interval) point of the domain (0-1) and averages the binary y-value?
View 2 Replies
View Related
Dec 19, 2006
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
View 7 Replies
View Related
Mar 7, 2012
I am receiving an error at
Set CopyRng = Wkb.worksheet1.Range(Cells(RowofCopyworksheet, 1),
Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToLeft).Column))
I am trying to copy the first sheet in each file in the designated folder and paste it into a master worksheet.
Below is the code.
'Description: Combines all files in a specific folder to Format File for Upload.xls
Sub MergeMultipleFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
Dim RowofCopySheet As Integer
[Code] ....
View 1 Replies
View Related
Feb 2, 2007
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
View 9 Replies
View Related
May 18, 2014
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
View 6 Replies
View Related
Aug 18, 2009
I am new to VBA programming in Excel (currently 2003) so hopefully this isn't a "dumb" question.
I would like to re-arrange a group of data from a table of several rows and columns to a single column where the data from the first row is translated to a column then the second row is appended to the end of that data ....
ie:
( 1 ) ( 4 ) ( 7 )
( 2 ) ( 5 ) ( 8 )
( 3 ) ( 6 ) ( 9 )
to
( 1 )
( 4 )
( 7 )
( 2 )
( 5 )
( 8 )
( 3 )....
I thought a user defined formula would be a good place to start but am having problems getting the address of the cell that the function resides in to use to calculate the offset from a fixed cell (to be entered into the function as a argument). In other words, how do I get the address of the call that a UDF is entered in into the UDF? activecell.address is returning the cell that was last clicked not the cell were the UDF resides.
Secondly is there a better way to achive the results that I am looking for other than through a function? The size of the table will vary from worksheet to worksheet. I would also like to add an argumnet that lets me exclude cells with certain content from the resultant list.
View 6 Replies
View Related
Jan 2, 2007
I have created a drop down menu wseveral items for the first time. The drop down is located on several worksheets. What I'm trying to do is find out if there is a way to do 2 things.
A) capture a total (numerical value) of the number of items selected from the list on each worksheet. ex. if on worksheet #3 15 cells contain data from the drop down cell A1 on worksheet #1 would = 15.
&
B) capture a total (numerical value) of the number of times a specific item was selected from several worksheets. ex. if ABC was selected from the drop down menu 8 times on worksheet #2 & 6 times on worksheet #3, cell A2 on worksheet #1 would = 14.
View 10 Replies
View Related
Nov 9, 2009
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies
View Related
Jun 17, 2009
is there a VBA way to determine an unknown path in which a KNOWN WB is located !?
Assume a WB named: 1X1.xls Located at C:TEMP
[In case the user uses more than one partition and/or more than one HD - it might alse be located at: D:TEMP
The known open command for a known file AND Path is:
View 14 Replies
View Related
Feb 5, 2014
I have 2 tables where I need to pull data from one table into the other.
Table 1 - pull data here
A
Site
B
Begin Date
C
End Date
Rate
[Code]...
For example: site 77 in table 1, I need to pull whatever rate is shown for site 77 in table 2 for the date range specified on table 1. So the correct answer for the first row site 77 in column E would be .02. Notice there is a problem...mainly the dates do not match exactly. I just need the rate the applies for the majority of the time.
Another example. For table 1, site 174 from 2/11/11 to 2/22/12, the correct answer in column E (pulled from table 2) would be .02, even though Column D shows .00.
View 1 Replies
View Related
Jan 19, 2007
I have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
View 9 Replies
View Related
Aug 10, 2009
I have a sheet where I need to located set-up dates that are greater than 6 months. I dont know if this matters but the cells are not in consecutive rows but are all in column F. I have tried the serveral ways and nothing is working.
View 9 Replies
View Related
Apr 2, 2007
I have a table of data, every entry in the table is different. I need a way in a single cell to determine what column the data is in (and a way to get the row it's in would be nice too), some way to do VLOOKUP and HLOOKUP in reverse.
In the attached example I need a function that can take dog and return "1", "A" or even the header "Animal", if another similar function can return the row, that would be nice also but if I can get the column I can get the row. Example
I've tried a few things with creating an array formula to do matches across multiple columns and I can make a multi-cell array that will flag the right column with the right column number, but any attempt to sum/max/match this array formula returns 0 or #N/A
View 5 Replies
View Related
Oct 8, 2008
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
View 7 Replies
View Related
Oct 17, 2012
I want to be able to link spinbuttons to the cell it is located in automatically, so I can move it around or copy and then paste into other cells. I do not want to use one button to increment a selected cell.
View 1 Replies
View Related
Mar 20, 2014
How do I select the empty cell (once located after using the below loop) so I can paste into it?
[Code] .......
View 10 Replies
View Related
Aug 11, 2009
I currently have a button on a worksheet that loads a userform. I have code written that's not in a in a separate module but in the user form itself. It uses the information entered on the user form screen. When I try to reference data that's on a sheet other than the one that the button is located on, I get a "select method of range class failed" error. I assume that this problem has to do with the button macro being located on a different sheet than the data. Is there an easy fix?
View 4 Replies
View Related
Jan 20, 2008
What is the formula to be used to extract number from a alphanumeric string located at different row?
example:
test123test128test131
test124test129test132
test125test130test133
test126test131test134
test127test132test135
test128test133test136
result: ....
View 11 Replies
View Related