Extract Column From Table With Dual Headings

Nov 19, 2006

What is the best way to filter a list of data with dual headers, using both those headers as the filter criteria? Id like to extract 1 column of data to copy to another location using something like Advanced Filter to select 2 criteria ( Upper header and Lower header), and copy the one column with the matching header values.
The worksheet has the following peculiarities:

- 2-row headers
- Top row headers (main categories) are merged, spanning several columns (I can un- merge if necessary)
- Bottom row headers are sub-categories and have repeating names

Although the top headers are merged and the bottom headers have repeating names, each of the 2 headers combined creates unique labels for each column.

View 3 Replies


Dual Headings Match

Jun 21, 2007

TAKING A BIT FURTHER THE POST Find Min Value In Multiple Columns And Match The Header

Here's my problem: I am trying to find the MIN value in a column with dual headings and match the corresponding product which makes my formula with three criteria.

see the attachment to see the structure of the tables and further explanation.

View 4 Replies View Related

VBA Create Yearly Extract Using Column Headings

May 2, 2014

I'm using the code below to extract data from a 'Source' sheet to populate a "Yearly Extract Summary" 'destination sheet. With the unique distinct values copied from column I on the 'Source' ("All Data") sheet to column B on the 'Destination' ("Desired Output") sheet. In addition the values from column J on the 'Source' sheet are summed and paste under the relevant month on the 'Destination' sheet.

[Code] .......

The code works fine and the correct figures populate the correct columns and rows on the 'Destination' sheet.

As you can see from the code above, the monthly values have to be hard coded to match the column headings and this is fine when using a static 12 month period. But I'm now wanting to use a rolling 12 month period, which, at the moment, necessitates the need for me to change the code each month so I'd like to change the code but unsure where to even begin, how to produce the initial script.

I'd still like maintain the existing functionality in this section of code:

[Code] ...........

I have attached a file which contain 3 sheets.

The "All Data" 'Source' sheet,

The "Output" sheet, used for testing, and

The "Desired Output" sheet which shows the results using the current code

To run the code, please use the button at the top of the "All Data" sheet.

Sum Categories Test2.xls‎

View 14 Replies View Related

Fill Table By Match Row & Column Headings Of Another Table

Aug 29, 2007

I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.

View 3 Replies View Related

Pivot Table Second Row (column Headings)?

Apr 2, 2014

See the attached excel workbook:


View 2 Replies View Related

Can Add Spare Row Between Column Headings And Data In Filtered Table

May 2, 2014

I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).

The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.

View 8 Replies View Related

Convert Table Into List With Column & Row Headings Appended

Sep 29, 2006

I have a table with unsorted Time Data and Headings for each Row and Column (See attachment). I need to display this data in another worksheet as a scrollable list.

Then when I click on any list item, it displays only that data in the following format:

A1 = Time. A2 = Row Heading. A3 = Column Heading.

Easier to understand if you view the simple spreadsheet attached.

View 4 Replies View Related

Excel 2013 :: Make Heading Column Match With Table Headings?

Apr 11, 2014

I was going through "To do list with progress tracker" template in Excel 2013. I noticed when i scroll down the page the heading column (A,B,C,D,E,F,G etc.) automatically matches with the inserted table headings.

View 1 Replies View Related

Dual Column Dropdown Where Only One Column Populates The Cell

Apr 19, 2012

I've been trying to solve with a 2 column drop down. What I am hoping to do is use two columns to aid the user in selecting the correct entry. So the first column will be a number and the second column would contain what the number means

Col1 | Col2
001 | Horse
002 | Cow
003 | Dog

Both columns show when the list is selected, but when the user selects 003 | Dog, the cell would be populated with only the 003.

View 1 Replies View Related

Pivot Table Report With New Headings

Sep 28, 2007

I have a simple table Attached. (A simplified version of a much larger table) The data continues on for thousands of entries and there are quite a few more columns. Names are dynamic in that names will be added and deleted over time. (There is a list of names on a different worksheet that updates as users are added.)

I wish to Consolidate the Data Under Different Titles. The data in the NAME column will Consolidate to list each name in Alphabetical order. The data under the RAP COUNTER column should count the number of YES entries per NAME under the new title ATTEMPTS. The data under the RESULT column should Count the number of KILL entries under the new title KILLS. And the Data in the TG SCORE column should average all entries per NAME under the new title TOTAL SCORE. I tried to do this with a pivot table to no avail. I could write some programming to accomplish this, but I am am amateur, and I also worry about time required to run a macro for thousands of lines.

View 5 Replies View Related

Re-arrange Table & Transpose Headings

Feb 26, 2008

I have a question regarding Excel 2003.

I have to complete a task using Excel. Normally I would complete the task using a database, but this one needs to be complete using Excel (for others to use afterwards)

I have a flat semicolon delimited text file which holds x amount of lines OR I can get the data using an ODBC connection (directly from the DB)
Each line starts with a date, a name, a second name, and a price.
See: 1.input.jpg


What I would like is the date on the horizontal row and name and second name as headline, and the price as the data.
See: 3.result.jpg

How can I solve this using Excel?

View 5 Replies View Related

Formula To Expand Headings To Table Columns

Jan 25, 2014

The attached workbook has a fragment of a table . The column heads are letters representing job nos. The first row is of numbers which will always be multiples of 1000. Subsequent rows are the factors of each number by each number.

My problem is how to structure the columns of the second table so that if a number has a factor of 1 there is one copy of that column head. if the number has a factor of 2 then there are 2 copies of the head, and so on.

The table can vary in size but the first row of each column will always be an integral number of 1000's (e.g. never 1250).

I have not been able to attach the workbook as "ADDFILES" is not visible in the download screen, I hope the above description will be enough.

View 3 Replies View Related

Find Most Recent Date In Column Headings In A Range - Insert New Column And Heading

Apr 4, 2014

I have a 2 groups of column headings with a different month and year in each heading so

1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"

2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"

Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"

Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"

Because the ranges keep changing month over month, how do i do this.

View 4 Replies View Related

Cannot See Row & Column Headings

Nov 23, 2006

I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?

View 2 Replies View Related

Months As Column Headings

May 24, 2007

I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.

To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.

View 13 Replies View Related

Save As CSV Without Column Headings

Jun 16, 2009

I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.

View 3 Replies View Related

Locking Row/column Headings In Place

Apr 5, 2009

The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.

As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.

Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?

View 2 Replies View Related

Put The Column Headings In Listbox Exactly As It Is In The Sheet?

Nov 10, 2013

I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns

View 3 Replies View Related

Count If And Return Of Column Headings

Nov 3, 2008

I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.

I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?

View 6 Replies View Related

Putting Column Headings In Formulas

Apr 9, 2012

I want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.

Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.

However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".

if this is possible and if so, how to do it?

View 2 Replies View Related

Column Headings Are Numbers Instead Of Letters

Aug 16, 2006

All my columns headings are now numbers instead of letters. how do i change them back to letters

View 5 Replies View Related

Column/Row Labels/Headings Missing

Aug 30, 2006

I have a spreadsheet which was created some time ago by an unknown person - I have the password for it and have unprotected it. On some of the worksheets the column & row labels are missing.

View 2 Replies View Related

Populating A Combo Box With Column Headings

Mar 23, 2007

I am trying to write an advanced sorting macro that sorts on more than 3 columns. I need to poulate a combo box with the column headings, so that I can choose which column to sort on first, second etc. Now I am a complete beginner at this sort of thing, but I believe that ranges are required. I have tried using rowsource properties, but the combo box only ever displays one column heading.

View 2 Replies View Related

Scroll Causes Column Headings To Repeat

Aug 23, 2007

I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.

It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.

I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.

View 9 Replies View Related

Return Column Headings Where Data Is Present In Row

May 28, 2008

Is there a way I can return a column heading(s) if text is present in a row?

Refer the attachment... ozgrid.xls

Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???

View 5 Replies View Related

Convert Cell Values To Column Headings

May 2, 2013

I have a table in the format

User Application 1 Application 2 Application 3 ... Application N

ABC aaa bbb ccc ddd
XYZ bbb yyy
LMN ccc ddd

I want to convert it into :

User Application

ABC aaa
ABC bbb
ABC ccc
ABC ddd
XYZ bbb
XYZ yyy
LMN ccc
LMN ddd

View 1 Replies View Related

Excel 2011 :: Column And Row Headings Missing (Mac)

Jun 5, 2012

I have a friend using Excel for Macs 2011 and the column and row headings (ABC & 123) are not showing on the spreadsheets on the screen. How to turn them on. I fgure they got turned off somehow?????

View 5 Replies View Related

Macro To Add Column And Copy Over Some Data Headings

May 13, 2013

Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...

Sub Macro17()
' Macro17 Macro

[Code] .........

The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.

View 6 Replies View Related

Copy / Paste Column A B C And D Into End Of Sheet With Headings

May 12, 2014

I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.

View 8 Replies View Related

Combine Matching Column Headings From 2 Worksheets To 1

Sep 15, 2006

1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis

Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA

2) I use the Match and Index formula for both sheets

the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")

for column B in sheet 1


View 2 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved