Scroll Causes Column Headings To Repeat

Aug 23, 2007

I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.

It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.

I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.

View 9 Replies


ADVERTISEMENT

Find Most Recent Date In Column Headings In A Range - Insert New Column And Heading

Apr 4, 2014

I have a 2 groups of column headings with a different month and year in each heading so

1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"

2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"

Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"

Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"

Because the ranges keep changing month over month, how do i do this.

View 4 Replies View Related

Cannot See Row & Column Headings

Nov 23, 2006

I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?

View 2 Replies View Related

Months As Column Headings

May 24, 2007

I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.

To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.

View 13 Replies View Related

Save As CSV Without Column Headings

Jun 16, 2009

I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.

View 3 Replies View Related

Pivot Table Second Row (column Headings)?

Apr 2, 2014

See the attached excel workbook:

SAMPLE_PivotTable.xlsm

View 2 Replies View Related

Locking Row/column Headings In Place

Apr 5, 2009

The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.

As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.

Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?

View 2 Replies View Related

Put The Column Headings In Listbox Exactly As It Is In The Sheet?

Nov 10, 2013

I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns

View 3 Replies View Related

Count If And Return Of Column Headings

Nov 3, 2008

I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.

I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?

View 6 Replies View Related

Putting Column Headings In Formulas

Apr 9, 2012

I want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.

Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.

However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".

if this is possible and if so, how to do it?

View 2 Replies View Related

Column Headings Are Numbers Instead Of Letters

Aug 16, 2006

All my columns headings are now numbers instead of letters. how do i change them back to letters

View 5 Replies View Related

Column/Row Labels/Headings Missing

Aug 30, 2006

I have a spreadsheet which was created some time ago by an unknown person - I have the password for it and have unprotected it. On some of the worksheets the column & row labels are missing.

View 2 Replies View Related

Populating A Combo Box With Column Headings

Mar 23, 2007

I am trying to write an advanced sorting macro that sorts on more than 3 columns. I need to poulate a combo box with the column headings, so that I can choose which column to sort on first, second etc. Now I am a complete beginner at this sort of thing, but I believe that ranges are required. I have tried using rowsource properties, but the combo box only ever displays one column heading.

View 2 Replies View Related

Return Column Headings Where Data Is Present In Row

May 28, 2008

Is there a way I can return a column heading(s) if text is present in a row?

Refer the attachment... ozgrid.xls

Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???

View 5 Replies View Related

Convert Cell Values To Column Headings

May 2, 2013

I have a table in the format

User Application 1 Application 2 Application 3 ... Application N

ABC aaa bbb ccc ddd
XYZ bbb yyy
LMN ccc ddd

I want to convert it into :

User Application

ABC aaa
ABC bbb
ABC ccc
ABC ddd
XYZ bbb
XYZ yyy
LMN ccc
LMN ddd

View 1 Replies View Related

VBA Create Yearly Extract Using Column Headings

May 2, 2014

I'm using the code below to extract data from a 'Source' sheet to populate a "Yearly Extract Summary" 'destination sheet. With the unique distinct values copied from column I on the 'Source' ("All Data") sheet to column B on the 'Destination' ("Desired Output") sheet. In addition the values from column J on the 'Source' sheet are summed and paste under the relevant month on the 'Destination' sheet.

[Code] .......

The code works fine and the correct figures populate the correct columns and rows on the 'Destination' sheet.

As you can see from the code above, the monthly values have to be hard coded to match the column headings and this is fine when using a static 12 month period. But I'm now wanting to use a rolling 12 month period, which, at the moment, necessitates the need for me to change the code each month so I'd like to change the code but unsure where to even begin, how to produce the initial script.

I'd still like maintain the existing functionality in this section of code:

[Code] ...........

I have attached a file which contain 3 sheets.

The "All Data" 'Source' sheet,

The "Output" sheet, used for testing, and

The "Desired Output" sheet which shows the results using the current code

To run the code, please use the button at the top of the "All Data" sheet.

Sum Categories Test2.xls‎

View 14 Replies View Related

Excel 2011 :: Column And Row Headings Missing (Mac)

Jun 5, 2012

I have a friend using Excel for Macs 2011 and the column and row headings (ABC & 123) are not showing on the spreadsheets on the screen. How to turn them on. I fgure they got turned off somehow?????

View 5 Replies View Related

Macro To Add Column And Copy Over Some Data Headings

May 13, 2013

Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...

Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select

[Code] .........

The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.

View 6 Replies View Related

Copy / Paste Column A B C And D Into End Of Sheet With Headings

May 12, 2014

I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.

View 8 Replies View Related

Combine Matching Column Headings From 2 Worksheets To 1

Sep 15, 2006

1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis

Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA

2) I use the Match and Index formula for both sheets

the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")

for column B in sheet 1

=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................

View 2 Replies View Related

Extract Column From Table With Dual Headings

Nov 19, 2006

What is the best way to filter a list of data with dual headers, using both those headers as the filter criteria? I’d like to extract 1 column of data to copy to another location using something like Advanced Filter to select 2 criteria ( Upper header and Lower header), and copy the one column with the matching header values.
The worksheet has the following peculiarities:

- 2-row headers
- Top row headers (main categories) are merged, spanning several columns (I can un- merge if necessary)
- Bottom row headers are sub-categories and have repeating names

Although the top headers are merged and the bottom headers have repeating names, each of the 2 headers combined creates unique labels for each column.

View 3 Replies View Related

Generate Column Headings From Part Of A String

Dec 9, 2007

In column B & C, starting at row 2, there are first names & surnames. In column H there is a grade for each name, eg B. Columns AC through AH hold subject codes for each name, eg 18E/Hs1 (potentially all columns could contain a code or only 1). The identifying part of the subject code is the first 2 letters after the / . So in the example the subject code 18E/Hs1 the 'Hs' signifies it is History. A table of subject code and their subject name is contained in a named range called Subject_ID (see below). I intend to make this range dynamic.

Subject .Subject
Code......Name
HsHistory
EnEnglish
ChChemistry
ITIT
PhPhilosophy
MpMaths (Pure)
PtPart-time
PyPhysics
SoSociology
BsBusiness Studies
SSSports Science
FrFrench
BiBuilding.

For each name (starting at row 2) I want to achieve the following: Scan across the range containing the subject codes (AC:AH), identify the first two letters after the / and match it to the subject name in the list. Paste the subject name to a cell starting at AI1 and then insert the grade (contained in column H) for that student in the corresponding subject column. The next unique subject name should then miss a column be pasted in AK1.

Example

......B ......C........H.. AC..........AD...........AE..........AF........AG.........AH.........
Matt........Pia......D....18A/Hs1...18B/En1....18B/Hs3

should result in the word History in AI1 and English in AK1 and the letter D in AI2 & AK2. Note as there is already a reference to History this is not repeated again.

I hope this is clear. I have enclosed a sample workbook with expected output and colour coded the subject names so that the order that they are pasted in is evident.

View 9 Replies View Related

Return Column Headings Where Data Is Present In Row

May 28, 2008

is there a way I can return a column heading(s) if text is present in a row?

refer the attachment...

names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?

View 4 Replies View Related

Autofill Column To Repeat Set Of Data From Another Column

Aug 10, 2013

I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.

Outflow % Table
25
50

[Code]......

View 6 Replies View Related

Search Along A Column And Scroll To It

Oct 10, 2008

Is there a way using VBA, that I could type something in a cell, and then it would find it in the A column and scroll to it?

View 3 Replies View Related

Transfer Data From One Worksheet To The Next By Matching Column Headings

Feb 25, 2012

I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):

Date Amount Title

I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".

with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.

View 4 Replies View Related

Match Column Headings - Copy And Paste Data

Jan 23, 2014

I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.

What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.

It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.

View 2 Replies View Related

Convert Column Headings To Cell Value In Large Spreadsheet

Mar 12, 2014

I have a very large spreadsheet that is a consolidation of approximately 105 separate of contacts lists. The new consolidated spreadsheet contains demographic data, and a column for the name of each of the 105 lists. Each contact in the consolidated list had an "X" placed in the column if they were a member of that particular list. Each contact can be in more than one list. This is not very useful for me.

Here's a visual representation of the current list along with what I need:

FName
LName
Address
Phone
City
List1
List2
List3
List4
List5
List6

[Code] .....

I would like to add a column to the spreadsheet and call it "Source"

And then have a macro or VB script to do the following:

1. As shown above, put the column name (ie "List2") in the "Source" column whenever there is an "X" in that row for the corresponding Column.
2. Because each contact can be in more than one list, I need to append the column names so that "Source" column contains all of the column names (Lists) that had an "X"
3. Once all of the list names have been added to the "Source" column, I will delete the list columns.

View 1 Replies View Related

Can Add Spare Row Between Column Headings And Data In Filtered Table

May 2, 2014

I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).

The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.

View 8 Replies View Related

Making Column Headings Apply To Multiple Pages ()

Dec 21, 2006

I work with an excel sheet to produce a list that gets distributed (in hard copy). A problem that I have is sometimes, the list spansmultiple pages, so I have to manually use the page break preview to put the column headings on the first row of each page.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved