Putting Column Headings In Formulas
Apr 9, 2012
I want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.
Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.
However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".
if this is possible and if so, how to do it?
View 2 Replies
ADVERTISEMENT
Apr 4, 2014
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
View 4 Replies
View Related
Mar 5, 2010
NDL234561100015657
NDL546891100015658
NDL666771100015659
OSL342561200018756
OSL234441200018757
PIL44994 1500014566
NDL678991100015600
NDL555551100015664
above is col A which has all codes and second is col D which has respective numbers. i want help with some macro which can combine (seperated with a comma) all the numbers in col D based on first three letters of each cell in col A.
see like for NDL, i will have 1100015657, 1100015658, 1100015659, 1100015600,1100015664.
see like for OSL, i have 1200018756, 1200018757.
View 9 Replies
View Related
Apr 6, 2009
putting rows between different values in first column. The following puts 3 row inbetween each value in column "A".
View 2 Replies
View Related
Nov 23, 2006
I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?
View 2 Replies
View Related
Feb 13, 2008
I have a list of deals at current this is 500 odd cells long and increases every week
What i was doing was using a VLOOKUP to give me the details of the deal.
The problem with this is as follows
The deal ID was in column M,
What i was doing was copying the Deal Id and putting this into column A and then doing a vlookup.
What ive just realised is that this wont do what i need.
What this will do is return the value of the deal but only if the deal ID is matched in both Column A and M to give me the correct information.
Is there any way possible i can put in a deal ID, that will search the spreedsheet of all deals and return me all of the inforamtion of that deal
View 9 Replies
View Related
May 24, 2007
I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.
To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.
View 13 Replies
View Related
Jun 16, 2009
I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.
View 3 Replies
View Related
Apr 5, 2014
does it not like dates? i have columns of data and i wish to search it for each month and then print a months worth. here is part of the data. maybe vlookup does not like dates? i tried putting an index column on the left, 1,2,3,4... but it still would not pick up "Jun"
View 8 Replies
View Related
Feb 17, 2010
Need to trimming certain information contained in 1 cell and putting them each in a column. I could do left, mid & right but this time there is inconsistency in the content of the cell.
I've attached a file which will further give you an idea exactly what I want (formula to be in Column M to P).
View 2 Replies
View Related
Apr 2, 2014
See the attached excel workbook:
SAMPLE_PivotTable.xlsm
View 2 Replies
View Related
Apr 5, 2009
The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.
As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.
Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?
View 2 Replies
View Related
Nov 10, 2013
I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies
View Related
Nov 3, 2008
I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.
I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?
View 6 Replies
View Related
Aug 16, 2006
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies
View Related
Aug 30, 2006
I have a spreadsheet which was created some time ago by an unknown person - I have the password for it and have unprotected it. On some of the worksheets the column & row labels are missing.
View 2 Replies
View Related
Mar 23, 2007
I am trying to write an advanced sorting macro that sorts on more than 3 columns. I need to poulate a combo box with the column headings, so that I can choose which column to sort on first, second etc. Now I am a complete beginner at this sort of thing, but I believe that ranges are required. I have tried using rowsource properties, but the combo box only ever displays one column heading.
View 2 Replies
View Related
Aug 23, 2007
I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
View 9 Replies
View Related
May 28, 2008
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
View 5 Replies
View Related
May 2, 2013
I have a table in the format
User Application 1 Application 2 Application 3 ... Application N
ABC aaa bbb ccc ddd
XYZ bbb yyy
LMN ccc ddd
I want to convert it into :
User Application
ABC aaa
ABC bbb
ABC ccc
ABC ddd
XYZ bbb
XYZ yyy
LMN ccc
LMN ddd
View 1 Replies
View Related
May 2, 2014
I'm using the code below to extract data from a 'Source' sheet to populate a "Yearly Extract Summary" 'destination sheet. With the unique distinct values copied from column I on the 'Source' ("All Data") sheet to column B on the 'Destination' ("Desired Output") sheet. In addition the values from column J on the 'Source' sheet are summed and paste under the relevant month on the 'Destination' sheet.
[Code] .......
The code works fine and the correct figures populate the correct columns and rows on the 'Destination' sheet.
As you can see from the code above, the monthly values have to be hard coded to match the column headings and this is fine when using a static 12 month period. But I'm now wanting to use a rolling 12 month period, which, at the moment, necessitates the need for me to change the code each month so I'd like to change the code but unsure where to even begin, how to produce the initial script.
I'd still like maintain the existing functionality in this section of code:
[Code] ...........
I have attached a file which contain 3 sheets.
The "All Data" 'Source' sheet,
The "Output" sheet, used for testing, and
The "Desired Output" sheet which shows the results using the current code
To run the code, please use the button at the top of the "All Data" sheet.
Sum Categories Test2.xls‎
View 14 Replies
View Related
Jun 5, 2012
I have a friend using Excel for Macs 2011 and the column and row headings (ABC & 123) are not showing on the spreadsheets on the screen. How to turn them on. I fgure they got turned off somehow?????
View 5 Replies
View Related
May 13, 2013
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
View 6 Replies
View Related
May 12, 2014
I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.
View 8 Replies
View Related
Sep 15, 2006
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
for column B in sheet 1
=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................
View 2 Replies
View Related
Nov 19, 2006
What is the best way to filter a list of data with dual headers, using both those headers as the filter criteria? I’d like to extract 1 column of data to copy to another location using something like Advanced Filter to select 2 criteria ( Upper header and Lower header), and copy the one column with the matching header values.
The worksheet has the following peculiarities:
- 2-row headers
- Top row headers (main categories) are merged, spanning several columns (I can un- merge if necessary)
- Bottom row headers are sub-categories and have repeating names
Although the top headers are merged and the bottom headers have repeating names, each of the 2 headers combined creates unique labels for each column.
View 3 Replies
View Related
Dec 9, 2007
In column B & C, starting at row 2, there are first names & surnames. In column H there is a grade for each name, eg B. Columns AC through AH hold subject codes for each name, eg 18E/Hs1 (potentially all columns could contain a code or only 1). The identifying part of the subject code is the first 2 letters after the / . So in the example the subject code 18E/Hs1 the 'Hs' signifies it is History. A table of subject code and their subject name is contained in a named range called Subject_ID (see below). I intend to make this range dynamic.
Subject .Subject
Code......Name
HsHistory
EnEnglish
ChChemistry
ITIT
PhPhilosophy
MpMaths (Pure)
PtPart-time
PyPhysics
SoSociology
BsBusiness Studies
SSSports Science
FrFrench
BiBuilding.
For each name (starting at row 2) I want to achieve the following: Scan across the range containing the subject codes (AC:AH), identify the first two letters after the / and match it to the subject name in the list. Paste the subject name to a cell starting at AI1 and then insert the grade (contained in column H) for that student in the corresponding subject column. The next unique subject name should then miss a column be pasted in AK1.
Example
......B ......C........H.. AC..........AD...........AE..........AF........AG.........AH.........
Matt........Pia......D....18A/Hs1...18B/En1....18B/Hs3
should result in the word History in AI1 and English in AK1 and the letter D in AI2 & AK2. Note as there is already a reference to History this is not repeated again.
I hope this is clear. I have enclosed a sample workbook with expected output and colour coded the subject names so that the order that they are pasted in is evident.
View 9 Replies
View Related
May 28, 2008
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
View 4 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Jan 23, 2014
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
View 2 Replies
View Related
