Combine Matching Column Headings From 2 Worksheets To 1
Sep 15, 2006
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
for column B in sheet 1
=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................
View 2 Replies
ADVERTISEMENT
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Mar 7, 2013
I have an array of data with multiple codes stored in text...
I want to set a formula in a cell to look for all instances of specific text in an array. Then compare the value of all of the column headings, which are numbered across the top of the array, which contain a match in that column and return the highest value.
Example: 10x10 array, columns 1,3, and 5 contain "text" somewhere in those columns. Formula would return 5.
View 2 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Mar 30, 2014
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
View 9 Replies
View Related
Aug 5, 2014
Having trouble consolidating 3 worksheets into one worksheet, on these 3 worksheets they all have the same headings which go from A-R. I simply need to be able to run a formula or use some sort of method to incorporate all 3 lists into 1 master list. The only way i currently can do this is to create a vba script which simply copies say 500 rows from the first worksheet paste onto master spreadsheet then copy 500 rows in second worksheet and find next blank row and paste etc.
Is that the best way to do this or is there a better way?
View 1 Replies
View Related
Jul 3, 2013
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
View 5 Replies
View Related
Jun 9, 2013
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. Please note that there is no fixed number of inputs for any one group i-e the solution has to be dynamic.The groups are numbered from 1 to 6 and number of groups is fixed i-e 6.
A sample file illustrating the inputs and required output is attached.
I also posted this on: [URL] ....
Sample_file_summary.xlsx
View 2 Replies
View Related
Jun 9, 2013
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group (from a drop down) which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. There is no fixed number of inputs for any one group i-e the solution has to be dynamic.
Attached is a file illustrating the inputs and the required output. I would prefer a formula based approach but not against VBA based suggestions either.
Sample_file_summary.xlsx
Also posted at: [URL] ....
View 2 Replies
View Related
Apr 16, 2012
I am looking for a macro that will combine qty's of item codes when first 6 out of 9 numbers in the item number match. Please see example of data below. In this case, the macro looking at the first 6 numbers in used and new. I should get a total of 26 - new and 45 -used.
A B C D E
Item Name yard Item Numb Inv New Inv Used
Frami panel 3x6 416-100 588801000 6 27
Frami panel 3x6 416-150 588801000 10
Frami Xlife 3x6 416-100 588801500 20 8
View 1 Replies
View Related
Apr 4, 2014
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
View 4 Replies
View Related
Nov 23, 2006
I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?
View 2 Replies
View Related
May 24, 2007
I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.
To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.
View 13 Replies
View Related
Jun 16, 2009
I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.
View 3 Replies
View Related
Nov 22, 2008
I have two worksheets with a column of part numbers. I am trying to combine them in a new worksheet and remove duplicates.
View 7 Replies
View Related
Aug 14, 2006
I need to transfer a lot of data from many worksheets into one worksheet. The columns are all uniform, but the rows are not. I’d like some VBA code that would look at worksheet A(1) and copy the first entire row where column A is not blank and paste it to the first blank row in another worksheet titled “A(Combined)”. The code would then copy the second blank row in A(1) and paste it into the next blank row of “A(Combined)”. The code would continue until all rows with data in column A are transferred to “A(Combined)” and then proceed to worksheet A(2), etc. and do the same. See the attached workbook
View 3 Replies
View Related
Mar 18, 2008
I am trying to copy raw data from two worksheets (Sheet2 = "550 Report (raw data)" & Sheet3 = "305 Report (raw data)"), that I cannot edit, over to a new worksheet (Sheet1 = "Exception Management") that I can edit. I have been successful in coding Sheet2 to come over correct, but am having problems with Sheet3 because of a few issues:
1st: Column A on both sheets contain a unique alpha-numeric identifier that can be used to identify records that can be combined. Sheet3 will sometimes contain multiple records for a single Sheet2 record.
2nd: Matching rows from Sheet3 will always be done based on Sheet2 column A (So I need to search through Sheet3 column A based on all values in Sheet2 column A).
3rd: The dataset is MUCH larger than my example files. Sheet2 normally contains 700+ rows of unique identifiers with 56 columns of data. Sheet3 is pretty much as-is, except ususally 1/10th the number of rows as Sheet2.
Here is the code I am experimenting with:
Private Sub CommandButton1_Click()
Sheets("Exception Management").Select
' Prepare Exception Management sheet for new data
Cells.Select .......
View 9 Replies
View Related
Apr 2, 2014
See the attached excel workbook:
SAMPLE_PivotTable.xlsm
View 2 Replies
View Related
Apr 5, 2009
The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.
As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.
Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?
View 2 Replies
View Related
Nov 10, 2013
I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies
View Related
Nov 3, 2008
I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.
I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?
View 6 Replies
View Related
Apr 9, 2012
I want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.
Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.
However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".
if this is possible and if so, how to do it?
View 2 Replies
View Related
Aug 16, 2006
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies
View Related
Aug 30, 2006
I have a spreadsheet which was created some time ago by an unknown person - I have the password for it and have unprotected it. On some of the worksheets the column & row labels are missing.
View 2 Replies
View Related
Mar 23, 2007
I am trying to write an advanced sorting macro that sorts on more than 3 columns. I need to poulate a combo box with the column headings, so that I can choose which column to sort on first, second etc. Now I am a complete beginner at this sort of thing, but I believe that ranges are required. I have tried using rowsource properties, but the combo box only ever displays one column heading.
View 2 Replies
View Related
Aug 23, 2007
I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
View 9 Replies
View Related
Jul 16, 2012
I have a a client who sends me an excel workbook quarterly. There are 90 worksheets and each has 20 language columns which are suppose to be the same on each worksheet.
My Problem is I want to merge them into one worksheet so i can add them to a database, but the client keeps changing the order of the languages!
So as an example I need to be able to identify the Polish, Russian and English columns on every worksheet and then combine each language to a new column on a new worksheet.
View 9 Replies
View Related
Jun 28, 2008
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
View 9 Replies
View Related
