Macro To Add Column And Copy Over Some Data Headings
May 13, 2013
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
I want to filter the data and next. I want to copy the data from sheet1 to sheet2; below code working fine, but.
Sub CopyFilter() Dim rng As Range Dim rng2 As Range With ActiveSheet.AutoFilter.Range On Error Resume Next Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _ .SpecialCells(xlCellTypeVisible) On Error Goto 0 End With If rng2 Is Nothing Then MsgBox "No data to copy" Else.............................
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets Lets say for example;
I have Symbol AAA in Sheet1 I have Symbol ZZZ in Sheet2 I have Symbol GGG in both sheets......................
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
Im trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.
I have a dataset that is large. I want to write a macro program that checks the number in cell A1, copies the number and then the rows contents to another worksheet/spreadsheet. Then jumps to cell A2 and if the number is different to that of A1 copy the data of that entire row over from that row to the next worksheet/spreadsheet. If the number is the same as A1 then jump over to A3
Then continue this process but rather than comparing it to A1, compare it to the new number that has been found in coloumn A.
For example
7 A 7 A 6 AB 7 A
So starting at the first line then jumping the next one then to 6 and finally 7.
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range Columns AJ through AX Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.
To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.
I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.
