When I've use the filter in excel, I can't seem to cut and paste/copy and paste the filtered data to another area. When I try to, it cuts/copys the entire data range, not the filtered one.
View 4 Replies
How to paste data into a sheet that is filtered, so that only the filtered rows get populated?
I am using paste special values but it is populating every row in between despite them not being filtered.
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies View RelatedI would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.
i have a huge table which i've filtered for a value in a column. my data has been reduced from 20000 to 100.
how can i copy and paste ONLY the values for those 100 rows? (4 columns and 100 rows)
everytime i do it, it copies all 20k rows!
I often end up in a scenario where I want to be able to move text from one column into another using a formula, which involves pasting a formula down a filtered range... E.g. Column A contains both ID numbers & dates, I want to move ID numbers into Column B, so I apply a filter to all ID numbers using a formula "=A1" and paste it down the filtered range.
It becomes an issue when there is greater than 50 - 60 thousand rows - excel throws an error "selection range is too complex" and disregards the filtered range.
Only thing I can think of would be a VBA script to automate pasting a formula in blocks of 50,000 rows.
Usually if I filter and perform some kind of operation on the cells displayed by the filter it is only these cells affected. For example, if I run a filter that shows 10 rows and I Paste a value into say, Column A, of all 10 Rows then remove the filter and look through all my rows, only the 10 cells displayed during the filter contain whatever I Pasted in.
However, sometimes when I do this many rows that were not displayed as part of the filter are affected. For example, I Paste something into my 10 filtered Rows and after removing my filter I find that whatever was Pasted into the 10 cells is now in 200 cells.
How can I be sure that any changes I make to a set of filtered cells are ONLY applied to those cells?
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies View RelatedI have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
I have a workbook with a database of 15 different products. We receive information with current prices for each of the 15 products on a weekly basis. This info comes in one single worksheet. I have created a different file with one worksheet for each product to track price behavior over time. I need to update these database everytime I get a new report. What I was trying to do is to develop a Macro to copy the data from a "Master" worksheet that includes all 15 products info to the respective worksheet for each product. Information is sorted in columns having the most recent date in the lowest column. I would need the Macro to copy the new data below the last price for each product. I would copy the data into the "MAster" worksheet, then run the Macro who would copy each row and paste it in its respective worksheet in the row rightafter the previous one.
View 4 Replies View RelatedI have been trying to find a way to sum up/only show the filtered data in a sheet.
i want to beable to filter the data by year and then only show sum up the data shown not
the entire column, is there a formula that will let me do this?
I have a pivot table with multiple supervisors and emloyees, I need to be able to find the average of a supervisors department and compare it with an employee with the employee seeing everyone else's data.
I don't have access to the original data that drives this pivot table. Is there some way I can use a calculated field to contain the average performance of all the employees under this particular supervisor?
In Worksheet A I have hundreds of Rows... Column 2 has a Type in it and not all rows will have a type and then there are various data elements in column 3, 4, 5 and 6
What I would like to do is in a worksheet B have a formula on each of the cells on a row that would look to worksheet A and would find the first row to match the type value in column 2. I would then want to lookup the value of column 3, and 4, and 5 and 6. Then in worksheet B, the next row the formulas in the cells that would also match type and would continue with the NEXT row in worksheet A that matched the type and again retrieve the appropriate cells. It would continue stepping through the rows of worksheet A until I had all of the now displayed in worksheet B
Basically I want to built a subset of worksheet A into worksheet B using the value of the Type column in worksheet A.
I suspect I am going to need to use multiple forumulas nested together in some way to achieve this.
Is it possible to filter a top * for already filtered data. E.g, i have sales people each having their total sales per month , what im trying to achieve is when i filter for only 1 person i want to get the top 10 sales months for that person.
View 2 Replies View RelatedI'm attaching a sample workbook which contains two sheets. The 1st sheet is titled "2008" which contains sample data in various columns & rows. The 2nd sheet is titled "print data", which at this time just has a similar, but less titles than on the sheet "2008". What I'm trying to accomplish (if possible) is when data is filtered on the "2008" worksheet, that the data will appear just as it is viewed on the "Print Data" worksheet. In a sense I want it to mirror the data on "2008". The "Print Data" sheet contains a lot less columns of information, which typically is not needed for written summary reports. I'm trying to minimize the amount of paper when printing, etc. I'm just not sure how I can accomplish this task without some type of macro or vba code.
I need to place the cursor into the first row of a filtered list, column A.
For example, I have a list from row 6 through row 4500, columns A through AB
I've written the macro to set the autofilter on and apply my selection criteria.
At this point, in this example, the first row of filtered data (below the header row) is in row 3083. I need to move the cursor to cell A3083 and then type in a formula.
I have a worksheet with exported data from a database query. I used this formula to compute the average of a column without taking the ZERO value:
View 5 Replies View RelatedI'm struggling with a function I wrote that I intended to filter out the blanks in a column, then only copy the results that aren't blanks to another sheet. The code below copies all data which I don't want. I know I need to be more specific in what range to copy, but I've tried various things but get compile errors.
Code:
Sub createMaterialRequisitionButton()
Worksheets("Material List").Range("$A$19:$E$500").AutoFilter Field:=1, Criteria1:=""
'COPY QUANTITY TO MATERIAL REQUISITION
Worksheets("Material List").Range("A19:A500").Copy
Worksheets("Material Requisition").Range("$A$12").PasteSpecial Paste:=xlPasteValues
End Sub
I need assistance to create a formula that combines SUMIF and SUBTOTAL. I have created a SUMIF function for a long list of data for approximately 45 staff based on a type of errors.What I would like to do is use the filter by staff id. For example, when I use the filter to choose John, the SUMIF function does not calculate only for John but it still shows for the entire staff. Is there any way I could combine SUMIF and SUBTOTAL so that when I choose a certain staff from that long list, it will calculate accordingly.I have attached a simplified list of the spreadheet. What I need is when I filter by staff ID, the summary for error type and summary for errors by step to change automotically.
View 3 Replies View RelatedI created a complex spreadsheet with AutoFilter. For each transaction recorded, the info consist of 4 rows per transaction. When I click the the filtering drop down, the result return with the single line. Is there a way that I can have the results return in group 4 rows? I merge the 4 cells in the first column but it doesn't work the way I want it to.
View 4 Replies View RelatedI would like to change the code below so instead of copying the whole column it only copies the items visible (i.e. they have been filtered in a couple of different columns).
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
I have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2()
Dim rngData As Range
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
Is it possible to AVERAGE() the numbers that remain from a filter, and average only those numbers? Can the AVERAGE() change with the criteria that are filtered?
View 2 Replies View RelatedI am copying some data from one workbook and pasting the data into another workbook depending on certain criteria (using autofilter) using excel VBA. For only One column i need to multiply data by 100 (i.e. convert it into percentage) For example column A in source worksheet has all values and i will paste it in column D of target worksheet. But before pasting i need to multiply the data by 100 so column D in target worksheet has values in %.
View 3 Replies View RelatedI am using 'Dim' to define a string for SheetName, a variable.
I have tried with no success various ways to try and paste data to a sheet with this variable.
I know the variable is correct as I am using it to make a new sheet then rename it and also move it.
I have a range that changes the data constantly, I have to watch that data changing. I am trying to work on a macro that copy that data and paste to another sheet. What would be the code to find the next empty row and paste my data there.
Data is in Sheet1, range A17:E32... and it needs to be pasted in sheet2 starting in F2.
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I
1 First I filter only Yellow cells
2 then I copy that Filtered cells
3 after that copying that filter cells I did Paste in same rows in J and K column
I have some simple code that filters my source data, what i would like is a way that the user could confirm that the data is correct by clicking a button for each line of data based on the ref number which would then input todays date in coloumn N.... is this possible?
View 1 Replies View Related
