Find Cell Address Of VLOOKUP Result And Replace With New Value
Jun 21, 2013
I am using VLOOKUP to find the size of a cam to be installed in a tablet press, based on the product code it will be running.
The array has two columns: (W) Product Code, (X) Cam Size.
Array: W4:X437
The user selects the Product Code from a drop-down list in cell E5.
The resulting Cam Size is displayed in cell E7. The VLOOKUP works fine.
=IFERROR(VLOOKUP(E5,W4:X437,2,FALSE),"")
Occasionally, the cam size has to be updated. The user would then select a new cam size from a drop-down list in cell E9.
I have a "Update Cam Size" command button.
What I need to happen is for the value in E9 to replace the value in the array that is displayed in E7. Obviously, I have to know the location of the cell in the array, but I can't figure that part out. I've tried ADDRESS and MATCH functions, but it comes back with "#N/A" Value not available error.
=ADDRESS(MATCH(E7,W4:X437,0),2)
View 3 Replies
ADVERTISEMENT
Dec 18, 2008
When I use VLOOKUP formula within a VBA routine ex:
For LoopCounter = 1 to LastRow
With Worksheets("0MATERIAL")
.Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)"
End With
RowCounter = RowCounter + 1
Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
View 9 Replies
View Related
Sep 24, 2009
I have put a VLOOKUP in place for a range of cells. Where the referenced cell has no entry it puts #N/A in the sheet. This is causing me further problems, is there a way to get all entries which equal this to leave the cell blank?
View 8 Replies
View Related
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Sep 18, 2007
Is it possible to get the location of the result cell of a lookup result. For example, instead of showing the cell value it shows the cell address of the results of a lookup. You see I have this Summary Report of a payroll system. Everyone doesn't need to pay social charges, except two people, "person1" and "person2". What I want to do is to first look at the names in the report to see if one of those people are listed in the summary(this can be done by lookup, I think). Then go to a different column on the same row as the person. So, for example, "person1" is in a14, then the macro will select the cell say... g14.
View 6 Replies
View Related
Oct 28, 2009
I would like to ping each computer ip address to check if it is online or offline and then write the result in Column C.
There needs to be no limit to how many ip addresses the script can ping.
View 4 Replies
View Related
May 13, 2014
I have a very large spreadsheet that I am using to track/analyze enterprise roles and the permissions that go along with each role. On the first sheet, I have a list of all employees (Name, Title, Department, etc) and on another sheet, I have a list of all Security Groups and Distribution Lists (with Members.) What I need to do is create a vba script that completes (1) a VLookUp using the Name column of the Employee sheet as the Criteria and then check against the first column in the Groups/Lists sheet for the matching name. If the employee's name from the Name column is found in the Group/Lists column, replace that name with the employee's Title from the Employee sheet. I then need this process to loop and continue through each column of the Groups/Lists sheet until all columns have completed. The end result should be that all names on the Groups/Lists sheet have been replaced with the corresponding Title found on the Employee sheet.
View 14 Replies
View Related
Apr 10, 2007
when i am doing the coding
may i know if there is a way to replace the cell address $A9 below: ...
View 3 Replies
View Related
Jan 29, 2013
I have a combobox that returns me the names that are in a spreadsheet.
I need a return label, the index (address of that cell that the combobox returned), how do I do that?
View 5 Replies
View Related
Mar 18, 2009
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies
View Related
May 18, 2002
Is there a way to get the vlookup function to return the cell address, rather than the value, of the lookup?
View 9 Replies
View Related
May 22, 2014
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
View 1 Replies
View Related
May 30, 2006
After using a vlookup to find a value in a cell I want it to return the cell belows information.
View 2 Replies
View Related
Dec 8, 2008
I have the following macro written:
Sub GT()Dim cell As rangeDim BeforeNull As StringDim FirstNull As StringDim InitialData As StringDim B As VariantFor Each cell In range("A1:A8")Alpha: InitialData = cell FirstNull = InStr(1, InitialData, " ", vbTextCompare) If FirstNull = 1 Then InitialData = Right(InitialData, Len(InitialData) - 1) cell = InitialData GoTo Alpha End If If FirstNull "" And FirstNull "0" Then BeforeNull = Trim(Left(InitialData, FirstNull - 1)) If FirstNull = "" Or FirstNull = "0" Then BeforeNull = InitialDatacell = BeforeNullNextEnd Sub
Now after the final Next, I need the macro to select the last cell changed. Is there a way to do this?
View 9 Replies
View Related
Feb 7, 2007
Find the cell address where the user created button placed in excel.
View 2 Replies
View Related
Dec 12, 2012
In workbook 1, I have summary sheet with columns
A -> SNO
B -> Customer Name
C -> Product Name
D -> MODEL
E -> Quotation Rate
I have to retrieve MODEL & Quotation Rate .
and also having seperate sheet for each customers say X1 , Y1 , Z1 ( so other sheet names as X1, Y1 & Z1)
In X1 sheet , I do have following columns
A-> Product Name ,
b-> Model (as of now limited to 1 per product name)
c -> Rate
Now my request is as follows Based on the Column b value in Summary sheet - i have to goto respective sheet and do vlookup for the respective product name and retrieve model and fill it in Column D. I heard i can use INDIRECT function and Vlookup in this junction .
View 5 Replies
View Related
Jun 12, 2014
I am trying to use a VLOOKUP on a table of manufacturing die cuts of certain sizes.
A formula tells me a number close to the die that is available. The rule is to use the next larger size die cut for the job.
An example of die sizes are:
Die Sizes
108.0
112.7
114.3
117.5
My formula gives me 114.22, therefore, I should use the 114.3 die.
However, the VLOOKUP says 112.7, not the answer I want.
How can I adjust this VLOOKUP to give me the next size down? I am guessing a IF, but I am not the best at writing IF statements.
View 4 Replies
View Related
Oct 5, 2013
In the following example, I need to create a formula to identify the cell address containing the string value "X"
BCDEFXABCDEFXABCDEF
Assuming this was row A, the formula needs to return $A$6 (or A6).
View 7 Replies
View Related
Aug 29, 2005
I'd like to have the cell address returned along with a value when I use the
MAX function.
View 13 Replies
View Related
Dec 8, 2005
I want a function that allows me to enter a range and then returns
the address of the cell with the minimum value. It is the Address I am
interested in, not the value.
View 14 Replies
View Related
Mar 3, 2007
Does anyone know the formula that produces the address (e.g. $A$1) of a cell within a table? I found the formula that gives the address of a single cell within a single row (or the address of a single cell within a single column). But I need the formula that gives the address of a cell where the row intersects the column. If I know the column header name and the row header name, how do I find the cell address for the two dimensional intersection?
View 11 Replies
View Related
Mar 8, 2009
I am trying to find a cell address from an area, like this:
@@A@@B@@C
1
2@@@hello
3
4
I need to find "hello" 's address from A1:C4, I found that the function MATCH works in single row/columns only.
View 2 Replies
View Related
Jul 1, 2014
I have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
View 2 Replies
View Related
Mar 16, 2014
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
View 3 Replies
View Related
Oct 22, 2007
i had this formula at one time but lost it.
i am trying to figure out how to evaluate a column and get the cell address of the cell with the last entry
example
--A
1 e
2
3
4 g
5
6 h
all other cells under A6 are blank
the answer is A6
View 9 Replies
View Related
Nov 14, 2007
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
View 9 Replies
View Related
Jul 27, 2007
I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.
How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?
For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range
LineID_Value = LineID.Offset(0, 8).Value
'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then
ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value
'End If
End With
Next LineID
View 3 Replies
View Related
Feb 26, 2014
what I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
View 3 Replies
View Related
Sep 6, 2013
Is there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
View 9 Replies
View Related
Aug 8, 2013
I have a file that I import into excel and append to the end of the last free position, However my totals are slightly out when compared to the main system.
I have found the reason why, they randomly slips in a Credit or credits.
So I have the scenario column P has a txt field and the majority of the time it has SI (Invoice) however when they issue a credit the txt becomes SC.
The annoying bit is that Column L has a value but it is not a negative number i.e. 75 where it should be -75
I can do an iF then and find the SC or SC's and I can place some text in Column L but I would like to be able to take the value in L and make it a negative number.
View 2 Replies
View Related
