I am trying to find a cell address from an area, like this:
A B C
1
2 hello
3
4
I need to find "hello" 's address from A1:C4, I found that the function MATCH works in single row/columns only.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I'm trying to make a macro, which search for a cell value of "Year". And from that cell, I want to make a range selection down to the first empty cell in row B or the first cell value with "Contracts of difference".
See the attached document I want to mark row 50 to row 55, and Column A to K. However as this range is in different rows each time, I need to make the selection dynamic. And I belive the heading "Year" is the best reference point.
I have the following macro written:
Sub GT()Dim cell As rangeDim BeforeNull As StringDim FirstNull As StringDim InitialData As StringDim B As VariantFor Each cell In range("A1:A8")Alpha:InitialData = cellFirstNull = InStr(1, InitialData, " ", vbTextCompare)If FirstNull = 1 ThenInitialData = Right(InitialData, Len(InitialData) - 1)cell = InitialDataGoTo AlphaEnd IfIf FirstNull "" And FirstNull "0" Then BeforeNull = Trim(Left(InitialData, FirstNull - 1))If FirstNull = "" Or FirstNull = "0" Then BeforeNull = InitialDatacell = BeforeNullNextEnd Sub
Now after the final Next, I need the macro to select the last cell changed. Is there a way to do this?
Find the cell address where the user created button placed in excel.
View 2 Replies View RelatedIn the following example, I need to create a formula to identify the cell address containing the string value "X"
BCDEFXABCDEFXABCDEF
Assuming this was row A, the formula needs to return $A$6 (or A6).
I'd like to have the cell address returned along with a value when I use the
MAX function.
I want a function that allows me to enter a range and then returns
the address of the cell with the minimum value. It is the Address I am
interested in, not the value.
Does anyone know the formula that produces the address (e.g. $A$1) of a cell within a table? I found the formula that gives the address of a single cell within a single row (or the address of a single cell within a single column). But I need the formula that gives the address of a cell where the row intersects the column. If I know the column header name and the row header name, how do I find the cell address for the two dimensional intersection?
View 11 Replies View RelatedI have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
i had this formula at one time but lost it.
i am trying to figure out how to evaluate a column and get the cell address of the cell with the last entry
example
--A
1 e
2
3
4 g
5
6 h
all other cells under A6 are blank
the answer is A6
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.
How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?
For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range
LineID_Value = LineID.Offset(0, 8).Value
'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then
ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value
'End If
End With
Next LineID
I am using VLOOKUP to find the size of a cam to be installed in a tablet press, based on the product code it will be running.
The array has two columns: (W) Product Code, (X) Cam Size.
Array: W4:X437
The user selects the Product Code from a drop-down list in cell E5.
The resulting Cam Size is displayed in cell E7. The VLOOKUP works fine.
=IFERROR(VLOOKUP(E5,W4:X437,2,FALSE),"")
Occasionally, the cam size has to be updated. The user would then select a new cam size from a drop-down list in cell E9.
I have a "Update Cam Size" command button.
What I need to happen is for the value in E9 to replace the value in the array that is displayed in E7. Obviously, I have to know the location of the cell in the array, but I can't figure that part out. I've tried ADDRESS and MATCH functions, but it comes back with "#N/A" Value not available error.
=ADDRESS(MATCH(E7,W4:X437,0),2)
Is there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
View 9 Replies View RelatedWhen I use VLOOKUP formula within a VBA routine ex:
For LoopCounter = 1 to LastRow
With Worksheets("0MATERIAL")
.Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)"
End With
RowCounter = RowCounter + 1
Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I need to use macro to find the last column index number within the print area. My cell sizes change depending on the data entered so the last column in the print area changes. The code I want to implement involves putting a title at the top of the page and creating a border that spans the width of the page. This is what I have so far:
LastColumn = Cells.SpecialCells(xlLastCell).Column ' replace this with last column in print area
Rows("2:2").Select
Selection.Insert Shift:=xlDown
Range(Cells(1, 1), Cells(2, LastColumn)).Select
With Selection
.MergeCells = True
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
End With
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
I have a excel worksheet that contains hostnames in column a. I want to run the dos cmd "tracert "hostname from column a", then, import the IP address from the cmd results in column b of my worksheet.
View 2 Replies View RelatedI am having troubles with using two methods together. I know how to find the address of the first or last occurance of a MAX in a range. I also know how to create a MAXIF function using criteria to determine what to consider for the max calculation. I do not know how to return the address of the result from the MAXIF.
I am using Office 2003 on WinXP.
Ultimately I want to take the address of the first result of a MAXIF and use it to do a lookup for a corresponding value. I'm not sure if I will be able to do this with a combination of functions, or if I will need a macro.
Heres an example:
Data:
Time WeekNum Count
01:02 1 12
02:05 1 35
03:09 2 456
14:20 2 123
12:24 2 122
Usage:
Use the maxif lookup to return the time of the largest count for WeekNum 2
Result:
03:09
I have a table with customers and their addresses (sheet2) and I need to find their GPS locations in sheet1.
I guess the logic would need to be something like this:
find CityName and StreetName in sheet1 where StreetNo is between minStreetNo and maxStreetNo return GPS X and GPS Y
with the formula or VBA code?
Example.xlsx
I have a range of cells (say A1:D8).
I wanna find the address (say $B$2) of the minimum value in that range.
This command does it but it only works on a column. it does not accept a range spanning more than one column.
=CELL("address",INDEX(B2:B7,MATCH(MIN(B2:B7),B2:B7,0)))
this will tell me the address of the minimum value.. but in a column... I need a range of many columns.
So I tried converting things to a Table.. but it never worked. basically the MATCH command is my problem. It only accepts single-column-ed ranges.
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies View RelatedI just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
View 4 Replies View RelatedUsing Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedI am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.