I want to know the lowest number from the peak high to the lowest low was? If I have not explained that properly, if I had 12.00% as the highest and the next few rows consistently, and gradually moved to a low of 8.00% that would be a difference of -4.00%. So -4.00% would be my answer. formula as I need to know this one number in a column of 4000+ percentages like you see above.
I have a data and it has been plotted into a graph. Here's what i have: I have 2 points, point A and point B with caps, 1.00 and 2.00 respectively. So now i need to draw 3 parallel lines, i.e from the caps and the main point itself. How do i do that? Manually will be of course selecting a line from the shapes. Any suggestions?
I need to map the names of the companies on the x axis (ANF, AEO, ARO, PSUN) and 5% to 30% on the y axis. Plotted for each company should be the min and max. So two points for each company. How can I plot this data. Underlying data as follows:
I'm stuck at a point in a graph that I am creating. Attached is as far as I have gone and now i'm having a gap on how to take the 2006, 2007 which is already in graph and add in how these years compare to guidelines visually in the same graph?
for instance ratings 1-9 are grouped in guidelines 1-4, 5-7 etc. How do i add in the 3 guides against each point? I have thought about adding a secondary axis but not how best to demonstrate the range of 1-4 to appear behind or above those points?
I have a set of data. I know how to do linear regression over the whole set of data. How do I have another linear regression over the first 5 points in the set of data on the same graph ?? I am using Excel 2007
how to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
I am trying to loop through a listbox with the code below.
what is happening is; if there are 6 items, the msgbox will show 6 times, but always with the last item in the list. I have tried different modifications but can't get it. There are no headers in my listbox.
In the attached spreadsheet I would like to locate the peak values of the numbers in column "F". I don't know if this is best done with a series of functions or by using a macro.
Column "F" translates to the light blue line on the attached chart. Column "F" (MACD) is the difference between a 12 week exponential moving average (EMA) and a 26 week EMA.
I would like the peak values from column "F" re-stated into column J,K,L or M. Ideally I would like to find the highest peak that occurred in a rolling 12 weak period. So not all peaks would need to be posted. By doing this I would only be identifying longer trends .
I'm using Excel 2007. 25 years experience using Excel and functions. Limited experience with Macros though long ago I used to write C code.
I have a spreadsheet with about 20,000 lines. (The number of rows fluctuate) I need a macro to remove (delete) rows that contains the phrase "Off Peak" and "Weekend"
I was setting it up in a loop but I don't know how to make the loop end after ALL the "Off Peak" and "Weekend" info is removed.
My macro just does a find then delete the row and then loop to the find again. Is there an easier way and can the "Off Peak" and "Weekend" statements be combined into one search
Do While Cells.Find(What:=" Off Peak", After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False).Activate ActiveCell.Select Selection.EntireRow.Delete Loop
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500 1/3/2000 $600 3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example: Imagine you own 3 different stores and you're selling oranges. So your table looks like this: http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis, Oranges sold on the y axis, and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I have been trying to write two formulas in one cell. I have been able to write them both separately but have been unable to join them both together. What I am trying to do if first search name them how many reoccurring numbers appear. I have provided an example below
a b c d
1 Tom 333 2 Sam 22 3 Sam 22 4 John 5 5 Sam 22 6 Sam 1 7 Tom 3 8 Tom 333
Currently I'm working on a prediction game using excel. Can excel do the tabulation itself(Points awarded) if I just key in the result? Can anyone help me? Thanks in advance. Examples below,
Result 3-1
Name Predicted Scored Points Alex 3-1 5 Brian 4-1 4 Charlie 2-0 3 Derrick 3-3 1 Eric 0-2 0
Point System: 1 point for correct goals/no goal by either both teams 3 points for correct result ( Win, Lose, or Draw - say result is 3-1, 3 points if you predicted a Chelsea 2-0 win) 5 points for correct match results No points for incorrect score and results.
I have two columns where TREND does not work well. I want to calculate the TREND value of Column 2 (PERCENTILE RANK) based on a new RAW number. If I TREND between just the two rows, the value is fine (i.e. If I TREND between 105 and 110 RAW, I get the right PERCENTILE RANK if the new X value is 106 (which is 15.3% PERCENTILE RANK). How can I make a formula that will only look at the two rows and TREND just those two rows to give me the right PERCENTILE RANK.
I am doing a golf predictor where I am using all 3 sheets in a spredsheet.
In sheet 1 I have the teams of players my friends have picked.
Sheet 2 I have the prgressive scores for each team done on a weekly basis.
Sheet 3 I have the names of 56 golfers and the points each can win for finishing anywhere between 1st and 22nd in a competition.
What I would like to know is there anyway I can replace the values 1st to 22nd with points (i.e., 1st = 400 2nd = 340 3rd =310 and so on down to 22nd) also is there a way I can transfer values between sheets.
I m trying make a spreadsheet up to fine the following i have also included a file raymond ran 11 seconds so he gets 150 points which is .6 of a second better than his Personal best time (PB's) but matt ran 13.6 seconds but it is 1.1 seconds slower than his Personal best time so he is minus 275 for every .100 of a second they get 25 points added or taken off
im doing a excell sheet for a fantasy league that i ahve created. I have a "total" cell to combine the total points for each player. I then used the "rank" formula to rank the highest points to that player. My question is...can i show like how many points behind everyone else is from who ever the "rank 1" is in?
Not sure if you can do 2 formuals in same cell or not. maybe i could have rank and how many points are behind in same cell
Example. lets say Player points rank Tim 5000 1 Jimmy 4000 2 -1000 Sara 3500 3 -1500
This may sound like a dumb question, but hang with me. I have two series in an xy plot. One is a line (withOUT markers) and one series is just markers (no line).
The line without markers is created in a way such that it forms a box and whiskers plot. The other series, are trial values that go into the box and whiskers.
I have desperately tried to get the second series (just points) to plot BEHIND the first series (line, no markers). Changing the series order does not work unless both series have lines. I have tried this in a variety of ways (including writing a macro which draws the markers first, and then the lines), but that doesn't work either!
I have a data for sedimentation along a pipe. I measured sediment concentrations at different lengths of the pipe, after different intervals of time. So I have 35 concentration values, take at 5 different points along the pipe, at 7 different times. Is it possible to plot a chart with these 35 points, with depth on y-axis, time on x-axis? These 35 points are percent removals (0-100). .
I have a worksheet ('Matrix') that has a grid that is 40 rows x 40 columns. On another sheet ('Drivers') I have a two columned table where a user is enters two numbers between (you guessed it!) 1 and 40. What I'm trying to do is within the grid, have a "Y" appear on the crossing point as denoted by the table. I've tried a couple of experiments with MATCH, but I'm not getting very far.
I've attached an example document to make this a bit clearer and I've coloured the references on the 'Drivers' sheet to correspond to where they should appear on the 'Matrix' sheet. Sorry if that's a bit garbled. Let me know if you need any clarification.
I want to know the minimum distance between customers that I visited in each day.
If i visit customer 1, 2 and 5 in one day, which distance is smaller? 1-2, 2-5 ou 1-5 and what is the corresponding value?
I have in columns DATE, CUSTOMER 1, CUSTOMER 2, ..., CUSTOMER 5 and in each row I put the Day and 1 or blank for each customer (visited / not visited). I also have a mileage chart for each customer in another sheet which is the source for my distance data.
I tried INDEX and MATCH but all I get is ZERO... I think it is comparing the same CUSTOMER.
I'd like to minipulate a single value from 2 different points - for example: I have a weight of 8lbs. on tab B and would like to change that weight using a spin control and also be able to change the same weight of 8lbs. using a spin control on TabD.
How to add numbers such as if a person has 15 points how do I input two points and have them added up to 17 points does it require multiple sheets or is there a command to do this seemingly simple operation.
I have a sheet named SymbolList in which I list stock symbols in the first column, and have row headings in the first row. I use the following sub to get stock quotes from yahoo. I developed a loop that works in steps of 200 because yahoo has a limit of 200 stock symbols that can be acquired in each request. The loop should go through the whole list in loops of 200 until the last row or if by mistake there is an empty row. The problem I face is that the loop does not work in a consistent manner, for example if I use 200 as the step limit, the sub skips all loops and only gets the last one, if I use a limit of 100 the sub skips the first loop and then proceeds, it only works well at a limit of 50.