Marking Grid Points
Nov 18, 2008
I have a worksheet ('Matrix') that has a grid that is 40 rows x 40 columns. On another sheet ('Drivers') I have a two columned table where a user is enters two numbers between (you guessed it!) 1 and 40. What I'm trying to do is within the grid, have a "Y" appear on the crossing point as denoted by the table. I've tried a couple of experiments with MATCH, but I'm not getting very far.
I've attached an example document to make this a bit clearer and I've coloured the references on the 'Drivers' sheet to correspond to where they should appear on the 'Matrix' sheet. Sorry if that's a bit garbled. Let me know if you need any clarification.
View 4 Replies
ADVERTISEMENT
Nov 22, 2008
Havent used a spreadsheet in ages and i'm having a fun time here. Cant seem to get the right formula for what i need. Here is a brief explanation!
I have a grid (not related to excel) of 999 by 999 squares.
The center is basically co-ords 500|500.
Upper left would of course be co-ords 001|001
Upper right would be 999|001
Bottom left would be 001|999
Bottom right would be 999|999
Now, here is what I am trying to do:
I want to have 3 squares chosen out on a spreadsheet I have made . .
1) here i put in the start co-ords (ie: 500|500)
2) here i put in the destination co-ords (ie: 505|510)
3) This is the fun one!!! ... And where I need the help!
I need a formula to put here that will tell me the number of squares I have to cross to get from one to the other!
View 9 Replies
View Related
Oct 24, 2013
I created a table where based in several competences anyone can evaluate performance and potential. My issue comes when based on that result (colum Y in "Perf&Pot" Sheet) I want to export that to a nine box matrix (Sheet 2 "grid" in the attached excel). As could be several people in the same box I wasn't able to com up with a formula that solves this.
Pasta1.xlsx
View 1 Replies
View Related
May 2, 2007
Is there a way of amending the following line of code so that it selects multiple data points in a data series in a chart (e.g points 14,15,16)?
ActiveChart.SeriesCollection(2).Points(14).Select
View 2 Replies
View Related
Feb 10, 2007
Marking My Post As? How do i mark my post as solved?
View 5 Replies
View Related
Nov 19, 2008
Usually when I try to mark a row/column for future reference I code the following:
View 14 Replies
View Related
Aug 15, 2012
Is there a way to go down a sheet and mark a certain row with say an X Then run a macro to copy all the cells in that row marked with the x to another sheet. There may be 45 X's down the sheet.
Example Below..
FirstLastAddressCityStZipCode
DaveJones55 Pine StElkhartPA3333221
xTomJones56 Pine StElkhartPA3333221
JoeJones57 Pine StElkhartPA3333221
xAmyJones58 Pine StElkhartPA3333223
So to either copy them to another sheet or even better a Word Document that is setup that has Cells to accept everything from First to Code.
View 3 Replies
View Related
Apr 5, 2007
I am wondering what is a convenient way to invisibly mark off certain cells on a spreadsheet, so that VBA can later recognize that they are so marked, and thus treat them differently. I have a spreadsheet listing various farms that our hatchery purchases eggs from. I have a commandbutton on that sheet that opens up a userform, allowing the user to assign certain farms to participate in various breed tests. Ideally, when the user selects a farm for a breed test, the corresponding cell on the spreadsheet (containg that farm's name) will be marked in some invisible way. That way, when I run another macro, the code will be able to recognize that cell as marked, and treat it accordingly.
So, what is the favored way of marking a cell in a way that will remain invisible to the user? I know that there are plenty of properties that a cell has, many of which appear useless to me. Is it good protocol to adjust any of these as I like, or is there some method that is to be preferred?
View 2 Replies
View Related
Jul 8, 2014
So I am trying to mark certain rows as duplicates if their values in Columns J, AD and ABS(BD) match. J and AD contain Number letter Identification combinations and BD contains a value. I currently have a formula as shows that will mark all of these values:
[Formula]
=IF(AND(COUNTIFS(J:J,J15,BD:BD,ABS(BD15),AD:AD,AD15)>1, (SUMIFS(BD:BD,J:J,J15,AD:AD,AD15,BD:BD,ABS(BD15)))<>ABS(BD15)),"Duplicate","")
[Formula]
The issue with this formula is that I do not want it to mark rows that look like this:
J - AD - BD
AA1 BB2 20
AA1 BB2 -20
AA1 BB2 20
I have a lot of rows that will appear like this. Their sum in BD equals the absolute value of the value in BD. I thought this would get picked up using the SUMIFS portion of my formula but it is not. I cannot find the problem.
View 2 Replies
View Related
Oct 22, 2007
there are loads of posts sitting with requests for more info but just sit there because 2/3 replies have ben posted but nothing has been actualy done.
i dont look at these because i assume problem has been fixed so when i/others look we could actually still have a go at helping the original person better still once this is in place have a link to unresolved posts
View 4 Replies
View Related
Apr 30, 2009
I am looking at a register of documents that are constantly being revised. What I need to do is mark up which ones need to be reviewedDocument RevisionViewedapples1apples2yapples3apples4apples5pears1pears2ypears3pears4oranges1oranges2oranges3
If a revision is marked as Y then previous revisions don;t need to be looked at and can be marked with n/a anything older doesn't need to be reviewed except for the latest one. In the above table if apples revision 2 has been viewed so rev 1, 3, and 4 are no longer relevant and only rev 5 needs to be reviewed. Pears rev 2 has been reviewed so on rev 4 needs to be reviewed. No Orange documents have been reviewed so only rev 3 needs to be reviewed.
The above is just an example my table consists of 8000 entries.
View 12 Replies
View Related
Mar 14, 2014
A little background, I am trying to match CC deposit batch transactions to daily sales transactions. I have two reports, one from our credit card processor/gateway (Report "B") and one from our software where the daily sales (Report "A") are recorded. I used the INDEX/MATCH formula to pull the information I needed from Report "A" into Report "B". It worked perfectly. My question is, is there anyway that I can show what information has been pulled from Report "A"? Possibly by highlighting what was pulled over? It is a longshot, but it would make my life so much easier if it was possible...
View 1 Replies
View Related
Jun 10, 2009
I receive an automation error, when using this code, the debugger is marking the line with n =...
View 14 Replies
View Related
Jan 9, 2014
I have a huge lists of names that I need to work with. The first is a list of all employees. The second is a list of those employees who have submitted their monthly report. In theory every record should be a match. I need to compare the lists and mark the people who are missing their monthly report in the main list of all employees.
Not sure how to set this up in Excel
Sheet 1: Column A - All employees names, Columns B-M: used to show whether a report has been submitted.
Sheet 2-13 (July, Aug., Sept., through June): Column A - employees who have submitted their report.
I need Sheet 1 to show either all of the missing records across all the months or it can show the ones that have been received. Either will work.
View 6 Replies
View Related
Jul 14, 2009
The find value will always be the same...its just a placeholder that is randomly inserted. (currently i am using the value "Placeholder"). basically in column B i want to insert the iteration of the Place holder. the attached spreadsheet better illustrates what i am trying to do. starting the count at zero is kind of important, but not the end of the world if it is impossible.
View 3 Replies
View Related
Nov 26, 2007
I want to have 2 cells where I can enter 2 numbers (length & height) so that a grid can be plotted. For example, a big sheet of paper size is length 30" x height 8", if first number is 10" (length) is entered, it will plot 3 lines across 30" (cos 30" divided by 10" equals to 3) and if I enter 2" (height) on 8", it will then cut it into 4". Attached a file for better understanding.
View 14 Replies
View Related
Jun 15, 2009
I'm not worried about the order of the data. What I want is information on turning a grid into a list.
View 4 Replies
View Related
Jan 16, 2013
I'm creating a fairly large risk analysis spreadsheet which uses a fairly standard 5x5 risk matrix.
I need a function or a formula which refers to the score a cell in a 5x5 grid, if given the row and column values, like this (where the columns are probability and the rows are impact):
VL
L
M
H
VH
VL
1
2
4
6
7
[Code]....
View 3 Replies
View Related
Jun 29, 2013
Example.xls
Within my attachment, I have a grid of data, Row A are headers, and beneath, various corresponding dates, there are no row headers.
I'm trying to do a lookup so that column header is returned bases on a exact cell value.
Example: inputting 03/03/2014 will return "Week 3"
Week 1|
Week 2|
Week 3|
Week 4
07/07/2013
|14/07/2013
|21/07/2013|
28/07/2013
[Code] ......
View 5 Replies
View Related
Mar 6, 2014
I'm trying to link objects and pricing to groups via a combo box. If the user selects Group A from the combo box and enters Object A on the line item, I want the price associated with Object A and Group A to populate.
Group A
Group B
Group C
Group D
Object A
$1
$3
$5
$7
Object B
$2
$4
$6
$8
Object C
$3
$5
$7
$9
Object D
$4
$6
$8
$10
View 9 Replies
View Related
Aug 13, 2008
about using list as a datagrid type. I was able to research some samples and applied it on my own, but unfortunately I am missing something again here. The data on the worksheet are not being populated when my range is on the AA column. It works with A1 column but not the far ranges. Im not sure about the limit of range anyway here is the
View 14 Replies
View Related
Oct 15, 2008
I'm having an issue with VLOOKUP, I'll keep it short as I don't think I need loads of details because I have done some troubleshooting and believe got to the cause of the problem... I just don't know how to fix it!
View 4 Replies
View Related
Mar 9, 2009
This is to inform you that I frequently use toggle grid tool to make my worksheet white/plain,doing this with the help of mouse is eating lot of my time which i really feel anonying/pain.
I would like to have a short cut key for toggle grid which lies in Forms toolbar.
View 9 Replies
View Related
Apr 23, 2009
I am trying to modify the code below to toggle the snap to grid on/off or off/on and is giving me an error.
Sub ToggleSnapToGrid(Optional Dummy As Long)
With Application.CommandBars.FindControl(ID:=549)
If .State = 0 Then
.Execute
Else
.State = 1
End If
End With
End Sub
View 9 Replies
View Related
Mar 23, 2007
I hope someone can help me with this, Ive attached a copy of an example spreadsheet that has the same requirement i need for another one i am creating.
Sheet 1 has the user input area, where the user enters the data they want stored.
All i need is to be able to transfer the data into the correct area on the grid on sheet 3,
View 5 Replies
View Related
Mar 3, 2008
Looking to expand grid in Excel 2003,
View 4 Replies
View Related
Apr 5, 2009
I have tried to make cartesian coordinates (X)and (Y) using excel 2007. now I want to represent some shapes (circles, squares, triangles, and so one). My problem now is with formating those shapes. I use this path (Insert > Shapes),, but the shape I add cover the grid,
I want (for example) a circle but I need only its circumference, and without covering the grid by its area. the same for other shapes.
View 3 Replies
View Related
Apr 20, 2009
How can I set up my sheets so that the background and grid are isolated, in other words only the background, the grid, and my data shows on the sheet, the rest will be blacked out. I need to email only the certain area of the worksheets.
View 3 Replies
View Related
Oct 3, 2013
Basically, I need to extract data from a grid/table (11 columns wide) and transpose it into a list for use in a pivot table. It like sort of reversing a pivot table to access the original data but I only need 5 of the columns repeated for each occurrence.
I have read many internet sources but they don't seems to fit my needs. Here is a solution from a similar question posted on StackOverflow entitled "How to “flatten” or “collapse” a 2D Excel table into 1D?"
The attached simplified mock-up explains what I am trying to do. I have colour coded the data to understand. The number of rows (10) will always be the same but the number of columns (Branches in this case) can extend for many columns.
View 4 Replies
View Related
Jun 20, 2014
I want to create a function called PasteGrid(SourceRange As Range, GridHeight As Integer, GridWidth As Integer)
What this will do is take a long single row or column of data and paste it into a grid with a defined GridHeight and GridWidth, I have came up with the below so far:
Code:
Function PasteGrid(SourceRange As Range, GridHeight As Integer, GridWidth As Integer)
Dim rRange As Range
Dim rCell As Range
Dim DestinationRange As Range
Dim GridWidthCount As Integer
Dim GridHeightCount As Integer
[Code]....
Something appears wrong and when following the code when it hits this line:
Code:
Cells(Destination.Row + GridHeightCount, Destination.Column + GridWidthCount).Value = rCell.Value
The function just stops and I'm not too sure why?
View 1 Replies
View Related
