Finding The Column With The MAX Height In Comparson Wth Othr Columns Of UNEVEN Height
Feb 24, 2009
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
Column A only has Some empty rows, and some rows with content.
The issue is I am having is I am trying to sort the the rows of column A in Alphabetical order, but Iwant to lock the height or merge the rows so that when I sort them I do not end up with empty spaces or them be un-aligned with Column B. This spreadsheet is too long to go and re-format every cell but here is an example:
A ----- B
John (blank) ----- this column's (blank) ----- rows are (blank) ----- merged
David (blank) ----- this column's (blank) ----- rows are (blank) ----- merged
The cells in B are already at the proper height to be alligned with the names.... but if I try to put the names in alphabetical order then nothing will be alligned.
I have an MS Access Data link (parametrized query) set up in Column A. (Specifically A5:B85). However, every time I change the value in cell G2 (the source of my A5 result), the width of column A always changes. Is there a way for me to get column A to "freeze" to a width size of my selection?
I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
I need to freeze the column and row height and width for a specific area in spreadsheet, so that it shouldnt be altered in future from any one using this sheet.
Refer to enclosed excel file, I have drew a chart base on the data in side. However, for the last column which is "SG Productivity(KUSD)", The column very small even cannot be seen, is there any way can enlarge columns in this field without changing other column? T
I have vba code to change column width and height into mm. The code is taking alot of time to run and then hangs my excel session. The code below calls two sub routines.
Sub Change() Dim i As Long
With Application .DisplayAlerts = False . ScreenUpdating = False End With
For i = 1 To 23 SetColumnWidthMM i, 3.5 Next i End Sub...
I have a number of cells where I've put to wrap text, but the cell size is not adjusting when I type past the size of the cells, how do I get the cells the get bigger automaticly to fit all the text but bigger in height not length?
This used to (and on some machines still does) work very well, but all of the sudden on my work machine, it is incredably SLOW!! The whole program takes a list of tasks and dates, and creates a wall calendar from them. Then (the offending part, below in code) looks at each cell on the wall calendar and formats it by sizing the height of a merged cell so that the entire task is displayed, then goes on to put a square around it (works fine).
The formating of the cell height/width can take up to 11 SECONDS each cell. What is happening to do this? Again, it USED to, and on some machines still does, FLY through this process. But now it just crawls. Code below, with the 3 offending lines identified.
Private Sub Fit_Height(ByVal Target As Range) Dim NewRwHt As Single Dim cWdth As Single, MrgeWdth As Single Dim c As Range, cc As Range Dim ma As Range
Application. ScreenUpdating = False With Target If .MergeCells And .WrapText Then Set c = Target.Cells(1, 1) cWdth = c.ColumnWidth Set ma = c.MergeArea For Each cc In ma.Cells MrgeWdth = MrgeWdth + cc.ColumnWidth Next
An additional item (clue?) is that, after the macro is done running, it is still unbearably slow to do anything on-screen. Grabbing the column header and changing the column width takes 5 seconds or so before it snaps to the desired width and displays correctly. Closing Excel and reopening it takes care of that problem.
More advancement (as I wait). It seems to be the Application.PageSetup that kills it. As soon as I hit the first Application.PageSetup line, the app grinds to a halt, and almost every line after that that manipulates the screen format or the page format takes 5 or so seconds EACH to process. I put them all at the end, but that really doesn't solve the problem, nor explain it, nor give me a true solution.
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
Is there a way to get cells in a column to adjust their height automatically, or with a macro to account for text overflow/wrap?
For example, lets say a column is 200 px in width and it's height is enough to view a single line of text, and the column is set to wrap text. Now more text is entered into the cell and it needs to be re-sized to fit two lines of text.
Is there a way to create a macro button to have this done automatically?
I am using excel 2003. I have copied and pasted text from microsoft word onto excel.
The text is already split up into rows and columns in word. When i past it into excel and select all thousand or so rows and then double click the row to engage the automatic row height it doesnt work. It cuts off the last line or last two lines of the text in most but not all of the cells. What can I do other than one by one change the row height?
- each cell in row 1 represents the width of its column (i.e., if D1=3, the width of column D should equal 3),
- each cell in column A represents the height of its row (i.e., if A4=5, the height of row 4 should equal 5).
Question1. I need the widths and heights to adjust automatically every time, when values of corresponding cells change. How could that be accomplished?
Question2. I read that the width/height are measured by number of characters (i.e., if width=3, it means that 3 '0' characters of normal format can fit in that space). Will the values with fractions work correctly (i.e. will width=3.5 correspond to 3.5 '0' characters)? If no, how to adjust for that?
Note. In the current situation, additional rows and colums will have to be inserted, so the solution should work with new rows and columns as well.
I have a spreadsheet in which double clicking on any of the cells in the range A4:C17 changes the contents of cells F4:I33. The following code tells me which is the active cell and then pulls the values for F4:I33 from a lookup table based in this.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Range("B100") = ActiveCell.Address() Cancel = True End Sub
code to stick in this (probably after the third line) that autosizes rows 4 to 33. There are no merged cells involved.
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
inability to set a default row height and still allow the occasional row that requires more space (i.e., one of it's cells has multiple lines of wrapped text) to AutoFit if necessary.
Say you have the data shown in NormalSettings.png in an Excel file (see attachments) and you want to have a little more room between the shorter rows, but not have them all set as big as the expanded rows. One way to do this in bulk is to select the entire spreadsheet and set a fixed row height, but this chops off any cells that require more space than your default height (see FixedRowHeight20.png). The only way to fix this is to manually scan through your sheet and individually select all rows with cells that need more room than your preferred row height and AutoFit them (good luck if your spreadsheet is any size...) . If you try selecting the entire sheet and choose Format-Row-Autofit, you're back to the crowded display shown in 'NormalSettings.png'.
My workaround to this annoying problem is this: choose a column that you're not using (I just select the very last column in the sheet by holding down CTRL and pressing the right arrow until the screen stops moving) and highlight the entire column by selecting the column header. Then increase the font size for that column...voila, even your blank rows will now AutoFit to the new font size rather than the font size you are using for your data...effectively increasing your default row height without sacrificing AutoFit capabilities. I find that using 16 as a dummy font size makes my data (which is font size 10, Arial) look nicely spaced out, but experiment and try stuff until you find what you like!
I am building up a formatted invoice, line by line all of which is working well from the data point of view but no quite so well from the presentation point.
My text is all in Arial 12pt and I have the row height set to "Auto" and cell alignment to wrap text (at least one cell per row often has 3-4 lines of text so I need "text wrap" on)
My issue is that the printed output from a multi row invoice looks "crowded" and as this is the view the client gets to see (and hopefully pay ) the look is important. I tried to set the row heights to say .71cm but that causes the text wrap to stop working correctly.
I think I am trying to get some form of "inside top" and "inside bottom" adjustment / fill / padding (which is what I would do if I was using some form of documentation tool like Madcap Flare for example) but I cannot see how to do it in excel.
I have a range named "rngOrders" on an Excel 2003 worksheet. I'm looking for a VBA macro that will set the row heights of the range to autofit (for rows/cells with wrapped text) and also set a minimum row height of 19.5 points for all rows.
I need to set the height of all the rows to 18.00. I need to set the width of all of the columns to 12.00, except for columns A, C, and T, which need to be at a width of 28.00.
I have a section of my sheet to have the data in the cell word wrapped.
Is there any way to set it up so the row height automatically changes when there is more than one line of data?
Right now if my cell reads:
The other day we went to the market.
It shows:
market.
Meaning only the last line of the data. I'd like it to automatically make the row height change to show the three rows. (And change any of the other rows where there is a cell with more than one line of data)
5 worksheets 30 columns per worksheet Total of 1300 rows of data across the 5 tabs
The row heights are not uniform across all worksheets but when I change them all down to 65536 on each sheet to height of 12, the file reduces in size from 11mb to 3mb.
It concerns me as it is almost like data could be getting lost.
I was wondering if VBA or Excel has the capability to add and total Row Height or Pixels? For example I have my Rows set to a height of 14.25 (19 pixels). My Range that I am working with is A2:T41 for a TOTAL ACCUMULATED ROW HEIGHT of 570 (40 Rows X 14.25) and 760 Pixels (40 X 19).
What I would like to accomplish is that once the TOTAL ACCUMULATED ROW HEIGHT of my Range reaches 570 then Row 1 appears. If the TOTAL is less then 570 then Row 1 remains Hidden.
Does anyone know IF and HOW this can be done? I need this due to the fact that the Rows will Autosize and I need to have my header Row appear. I can't just Freeze Row 1 because my actual Headers are on Row 16.
Hope this makes sense and hope that someone has a solution.
I need a formula to calculate the height of a cell. Basically I will repeat this formula thoughtout the database, and each cell in column U will have its row height.
have come up with the following
Function RangeHeight(rng As Range) As Double RangeHeight = rng.Height End Function
Now, the problem is, that the formula does not automatically update when the row height changes, and when I open the file on another pc, all the formulas change to #NAME since it does not recognise the custom formula.
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.