Adjusting Height Of Rows?
Jan 30, 2014
I'm writing a code to adjust the height of the row based on the wraped lines. I want it to be "16.5 * (number of lines)".
First I counted the number of lines in each cell. I wrote at D1 the formula to calculate the lines at A1:
=LEN(A1)-LEN(SUBSTITUTE(A1;CHAR(10);""))+1
Then I wrote this vba code to adjust the height:
Sub AdjustHeight()
Dim x As Double
x = 1
For Each Cell In Range("A1: A11")
Cell.RowHeight = 16.5 * CELL(D"x")
x = x + 1
Next Cell
End Sub
How do I do that multiplication? How can I tell it to multiply 16,5 with the value of the cell D"x"? Is this the best way?
View 2 Replies
ADVERTISEMENT
Dec 10, 2012
How Auto Resize (height) cell to fit text? (macros, formulas, setting)? One can make the height of the cell is reset according to the amount of text?
ej..jpg
View 4 Replies
View Related
Jul 21, 2014
I currently have this formula to deal with this:
=SUM(J5:INDEX(J:J,ROW()-1))
However, whenever I delete the top row...I get a reference error and have to re-adjust...
View 7 Replies
View Related
Jul 21, 2014
I currently have this formula to deal with this:
=SUM(J5:INDEX(J:J,ROW()-1))
However, whenever I delete the top row...I get a reference error and have to re-adjust...
View 9 Replies
View Related
Feb 24, 2009
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
View 14 Replies
View Related
Jul 11, 2014
I have this spreadsheet that I am creating schedules for my employees since our scheduling software at work is horrible to work with. It calculates total hours for each employee at the far right of the rows, and calculates total hours for each day in the columns. The formulas that calculate the hours for each day is set up to automatically deduct 30 minutes from a shift, for lunch, if they're scheduled for more than 5 hours (the gray shaded employee rows are for managers and that only deducts 30 mins if they're shift exceeds 8 hours).
I'm familiar enough to put somewhat complex formulas together, but I don't understand it enough to always make them work correctly. What I'm wanting to be able to do is add or subtract entire rows (add new employees or remove old), and have my formulas for calculating the total hours to still work. Right now if I delete a row the cell with the formula in it says #REF!. I can fix this by going through the formula and manually deleting everything in that contains those other cells, but the formula is huge, and it's pretty tedious going through the whole thing when it feels like there should be a simpler way of doing it.
TLDR: I want to be able to add/remove a row and have my cells currently on row 36 update the formula correctly.
View 3 Replies
View Related
Oct 15, 2007
I have an area in my spreadsheet (the current region surrounding cell G6) in which the height for each row should not exceed a specified limit (say, 150). It's okay if the row height is less than the limit - these rows should be left alone. I only want to resize those that exceed the defined row height limit.
Is there a simple way to reset the row height for rows whose height exceeds a specified maximum row height limit?
View 9 Replies
View Related
Oct 6, 2007
I generated my spreadsheet in using vb6.
Everything is working except that when I display the display (making it visible), some of the data in the rows hides underneath the row lines. I have to physically go into the spreadsheet to expand the rows to see the hidden data. Also, if I print the spreadsheet, the hidden part of the spreadsheet is cut off unless I mannually expand the rows. How can I programmatically expand the rows to fit each amount of records in the row. Currently, I have a module that is mannually calculating the rows
Also, I have attached the spreadsheet so that you can see my output.
Below is the code that calculates and formats the row presently:
w = 0
For Each R In xlWksht. Range("A5:N5"): w = w + R.ColumnWidth: Next
rht = xlWksht.Range("A5").RowHeight
With xlWksht.Range(xlWksht.Cells(ii + 1, 2), xlWksht.Cells(ii + 1, 14))
.HorizontalAlignment = xlLeft
.VerticalAlignment = xlTop
.WrapText = True
.Orientation = 0
.MergeCells = True
.RowHeight = .Font.Size * (Len(xlWksht.Range("A" & ii + 2).text) - Len("Comments:")) / w + rht + (rht - .Font.Size) ' + newlinecnt * .Font.Size
End With
Below is my entire module:
ii = 5
w = 0
For Each R In xlWksht.Range("A5:N5"): w = w + R.ColumnWidth: Next
rht = xlWksht.Range("A5").RowHeight
'Do Until M.qBW.EOF = True
Do While Not M.qBW.EOF
ii = ii + 2
xlWksht.Cells(ii, 1).Value = M.qBW![Req No]
xlWksht.Cells(ii, 2).Value = M.qBW![Description]
xlWksht.Cells(ii, 3).Value = ""
xlWksht.Cells(ii, 4).Value = M.qBW![ClientName] & Chr(10) & M.qBW![Status]
xlWksht.Cells(ii, 5).Value = M.qBW![P L] & Chr(10) & M.qBW![TotalProg1Hrs] ...
View 5 Replies
View Related
Feb 13, 2014
I'm trying to create a macro to delete all empty rows but only if they are a certain row height. I currently have a macro that looks to the first cell and if it's empty, then it deletes the entire row. The only problem is that I would like to keep the shorter, empty rows to maintain my desired formatting. I will post the code I have if I can figure out how to do it properly and not violate the forum rules.
[code]
Sub DeleteEmptyRows()
'Cell A above and below each header contains white and gray text to maintain formatting when deleting empty rows'
Dim i As Long, LastRow As Long
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row[code]......
View 1 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell?
View 13 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell? There is only one column of data.
View 1 Replies
View Related
Apr 18, 2008
I am trying to figure out a formula for the boss, but I just cannot wrap my mind around what I need to do. I’m sending out an S.O.S.! If you can figure this out, please respond.
=MIN(b4*12-25%,b4*12-500) + MIN(c4*12-25%,c4*12-500) fills in the cell with the correct answer, but not quite the answer that I need. Let me illustrate:
The first part of the formula is to take b4 times 12 minus 25% --if this amount is less than or equal to 500 then use the amount. If it is more than 500 then use 500.
(b4*12-25%)
234.25 * 12 = 2811 – 25% = 2811
2811 - 25% = 702.75 500 Since this amount is more than 500, 500 should be used instead. ~~this is actually the amount that I want to show in the cell, the amount saved~~
2811 - 500 = 2311 ~~this is the answer that is showing up in the cell, which is not quite what I need. ~~
I want to find the answer to this question: b4 times 12 equals ?, subtract 25% or 500 from that, insert this answer into cell.
One of my biggest problems with this is that I can’t even figure out how to say what it is that I need. The formula is doing exactly what I'm telling it to do and I can't even figure out what it is that isn't working. This formula is confusing my brain…!
View 9 Replies
View Related
Dec 8, 2009
I am trying to make some additions to this code. Basically what it does is copy some data from another sheet. Now there are two types of copying here.
1. A ‘call value’ from another sheet is copied to this sheet.
2. The formula from the previous cell in the column is copied. (eg. Formula in C3 is copied to C4, formula in D3 is copied to D4, and so on)
So the macro works fine for all cases EXCEPT the initial entry, which will be in Row3, that’s where the formulae begin. So I need some kind of an If-Then statement.. to say if A3 is empty then do the following, If not then do something else....
View 12 Replies
View Related
Jun 11, 2007
How would you adjust the network days formula so that Wednesday is considered a non-working day?
View 9 Replies
View Related
Oct 22, 2008
I have a table upon which I wish to perform vlookups, however I need to be able to adjust the range that the vlookup searches to include any data that may be added in the future without having to go into the sheets and change the vlookup.
Example
Name DOB
Tom 01/01/81
Dick 02/02/82
Harry 03/03/83
if someone then adds
Fred 04/04/84
I would like the vlookup to automatically accommodate the extra entry without needing any changes.
I've seen this done on data validation with the following formula:
=OFFSET($a$1,0,0,MATCH(REPT("z",255),$A:$A))
It only needs to do new rows, not columns.
View 9 Replies
View Related
Jun 29, 2006
I am using the =today() function to places todays date in a cell...how can I get the next to cells to automatically display dates that are 2 months and 4 months later without having to change them manually every day. FWIW, this is for an certification expiration chart.
View 4 Replies
View Related
Feb 4, 2014
I have the following formula....
=IF(B6<1,"",IF(I6<1,"PENDING",IF(J6>0,J6-I6,"PENDING")))
Where B6 = Job Number
Where I6 = Date Received
Where J6 = Date Completed
This calculates calendar days but now I need it to calculate only business days.
Not sure where within this equation I should insert the NETWORKDAYS function
View 4 Replies
View Related
Apr 6, 2009
This should be simple but I can't get it...any help appreciated. See sample attached
View 6 Replies
View Related
Oct 21, 2009
I'm working on a spreadsheet to rank stores based on how they perform in certain metrics. These metrics are weighted, and occasionally a metric for a store will get waived. I'm having trouble figuring out how to handle this without making a custom formula for each occurrence.
View 7 Replies
View Related
Jan 28, 2010
I have the a file that is downloaded from AS400. The time column is presented in 24 hours format in column D. For example : 92114 means 9.21 am. I need a formula to adjust the date in column B based on the following criteria:
1) If the time is after 2.00 pm, adjust to the next working day taking into account public holidays in column H
2) If the time is before 2.00 pm, remain the same day
3) if the time is after 2.00 pm and it is Friday, adjust to the next working day taking into account public holidays in column H
The correctly adjusted date is in column E.
View 2 Replies
View Related
Sep 17, 2010
I am trying to figure out if something here is even possible. I have an order form and a price list. I get different pricing based on the quantity I purchase. I would like to have the price auto populate based on the quantity entered. The price will be on another sheet.
I couldn't find a lot of info but I also may not know where to look.
example:
if (b2<62) then price is ($sheet2.b2)
if (b2<124) then price is ($sheet2.c2)
if (b2<372) then price is ($sheet2.d2)
Is this even possible to put into a formula?
View 6 Replies
View Related
Oct 3, 2008
below is some code from a spreadsheet I am working on,,,,,, as you can see it adds items to a dropdown list in a combo box. This may require an update at another time,,,,, is it possible for the list to be updated from a list in the spreadsheet, therfore preventing people from accessing the code
View 4 Replies
View Related
Jan 30, 2013
I currently have a tab that is contains a macro driven query pulling data from an access database. However, I have selected the option to add new rows for new data which in turn causes my sumtotal at the bottom of the sheet to be over ridden by this new data. My question is, could there be a way to have the total row move down as new rows are added from the query (formatting and all)?
View 1 Replies
View Related
Oct 11, 2013
I've got a Table with 3 columns. (Goods, Amounts, Type). Every column has similar filter. Can I from the second and third filter remove the single item selection (red square below).
View 2 Replies
View Related
Mar 26, 2014
I saw the below code in another thread that does almost what I need it to do. The only thing is that I need to only select certain worksheets, not all. Is there an adjustment I can make to this code or is there something I can do differently?
Each worksheet has a table on it as well, is there a code I could use to just combine certain tables?
Sub debit1()
'Combine all worksheets to the Summary sheet
'Created by Trevor G 30 June 2011
Dim ws As Worksheet
[Code]......
View 7 Replies
View Related
Dec 14, 2007
I am created a very simple account plan for colleagues in my team which is proving to be very poular with the exception of one thing.
I created the plan which is around 30 sheets on my laptops highest resolution setting. 1400 x 1050. Only one other colleague has this res available so of course when the rest of the team open it, it looks huge.
I need help with this as I'm still very new to excel, although learning very fast!
My preference for finding a fix for this would be to insert a scroll bar on each sheet that, when scrolled, changes the zoom of the page between a range of 50% and 100%. This may not be the best way of doing it but I'm trying to make the sheets as simple to use as possible as some of my colleagues are only just compuetr literate, let alone excel competent!
View 9 Replies
View Related
May 27, 2006
i do not know or can seem to find out is how i can program the team list in the table to adjust each team position auto-maticly relevant to each teams points scored
IE 1st 2nd 3rd 4th etc in a vertical league list
View 9 Replies
View Related
Jul 5, 2006
I have a macro on a workbook that when I hit the button it asks for the date of a register sales journal that I want to import. Then it asks for the cash in drawer amount. Then it puts in all of the data into the sales spreadsheet. Now I want to use the on time method to bypass the button and the entry of the date, and even get rid of the cash in drawer. I want to make the macro run at 9:30 every night. I want it to use the date on the computer to tell it which date to find? Here is the code I'm using! button macro
' Button2_Click Macro
Sub Button2_Click()
ImportData
End Sub
Here is the main macro
Function FileExists(sFile As String) As Boolean
Dim iLen As Integer
On Error Goto NO_FILE
FileExists = True
iLen = FileLen(sFile) ................
View 9 Replies
View Related
Sep 12, 2007
This is for a call centre and sales office. there are 3 tabs. Tab 1 represents the values that we update at the end of each week which then gives a running total over an 8 week period and then an average below. there is a seperate table for each staff member. Tab two is for one team of people and tab two is for the other team. Namely LG team and Sales Team. the tab 2 and 3 are to show league tables that both collect data from tab 1, but then create a league table showing who is top dog over the 8 week period. But this also has to self adjust to be in order.
on tab 2 and 3, the tables on the left will be hidden once complete, but are there to work out the league. the table on the right is then there to put and show the league in the right order. I HOPE THAT MAKES SENSE, COS EVEN I'M LOST NOW. I've followed previous advice on this and inputted what I think are the right formulas, but for some reason it's coming up with the wrong answers and several names are being repeated which are wrong. For example even when ben perhaps is number 2, it will show rahim as number 2 and number 3. why is this?
also, how do I get by the problem of on the odd occassion when perhaps ben and rahim have the same stats and are joint second, but it will only show ben as 2 and ben as 2 again, leaving rahim out of it. WOW. I'm glad I've got that out of my system. I was doing the washing up yesterday donig Excel formulas in my head. But the washing up got done at least.
View 3 Replies
View Related
Jan 26, 2014
Is there some possible way to control-C type copy a range from a sheet, then paste it duplicating everything from the original cheet; i.e., exact same cell references as are in the cell formulas?
I am suspicious it is right in front of me and I can;t see it, but I have run through all the special pastes that I could from the left-click paste sub-menus and I can not find it!
View 7 Replies
View Related
