Column A only has Some empty rows, and some rows with content.
The issue is I am having is I am trying to sort the the rows of column A in Alphabetical order, but Iwant to lock the height or merge the rows so that when I sort them I do not end up with empty spaces or them be un-aligned with Column B. This spreadsheet is too long to go and re-format every cell but here is an example:
A ----- B
John
(blank) ----- this column's
(blank) ----- rows are
(blank) ----- merged
David
(blank) ----- this column's
(blank) ----- rows are
(blank) ----- merged
The cells in B are already at the proper height to be alligned with the names.... but if I try to put the names in alphabetical order then nothing will be alligned.
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
This is an example of my data, lets say they are heights of trees. The number is the tree individual, t2 is the age of the tree, height_t2 is the height of the tree at the age t2, and t_ current is the age of the tree individual at present/current. I would like a formula for the t_current column that will pick out the current age of the tree individual and apply it to the age years previous. i.e the t_current age should be repeated for each height measurement for that tree individual, i have filled it in as an example.
How I can apply an IF function for four or more columns. for example: if the value is the same in four or more cells, IF function can type OK, if not something else.
what I am doing is this : =IF(H2=I2=J2=K2=L2,"OK","Not Equal") but I always receive the value"not equal" even when the all cells have the same value. The cells values are found using formula so I did copy and paste value but I received the same result.
Well we are trying to fetch some data using excel filters. But we are unable to apply filter simultaneously on two excel columns. The problem is explained in the attached sheet. If you have any query/doubt in understanding the whole problem then writ it.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
Why can't I apply text functions on strings into the file? For example: can't apply "Text To Columns" delimited by space on "Status Entry Date" column.
The code below restricts users from inputting anything other than an uppercase "X" in a cell within column N. If the user types a lowercase "x", it would automatically convert it to uppercase. If any other value is entered other than "X", a message box will fire.
The code is specific to column N (column 13). However, I would like to apply this to multiple columns, such as columns 13,14,17,20 .....
I am trying to come up with a macro that will find rows that contain the words �as % of Revenue� and then calculate and apply the appropriate formula to the actual and budget columns. I have attached a sample of what the source data look like.
The formula divides the category�s total expense by the revenue in row 4. For a complete macro, I would want to also subtract the budget result from the actual result and put its result in the �better (worse)� column. I need to use this on 12 or so different workbooks which is why I�m wanting a macro.
Here is my attempt to accomplish this task; however, I quickly realized it is woefully inadequate because I neither understand how to apply it to the different columns or how to find the next instance of �as % of revenue�).
VB: Sub Macro1() ' ' Macro1 Macro ' Range("B10").Select Cells.Find(What:="as % of Revenue").Activate Range("B20").Select ActiveCell.FormulaR1C1 = "=R[-1]C/R10C" Range("B21").Select End Sub
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are: And Word1 you Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter) And Word1 you Is the blah Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
I am using excel 2003. I have copied and pasted text from microsoft word onto excel.
The text is already split up into rows and columns in word. When i past it into excel and select all thousand or so rows and then double click the row to engage the automatic row height it doesnt work. It cuts off the last line or last two lines of the text in most but not all of the cells. What can I do other than one by one change the row height?
- each cell in row 1 represents the width of its column (i.e., if D1=3, the width of column D should equal 3),
- each cell in column A represents the height of its row (i.e., if A4=5, the height of row 4 should equal 5).
Question1. I need the widths and heights to adjust automatically every time, when values of corresponding cells change. How could that be accomplished?
Question2. I read that the width/height are measured by number of characters (i.e., if width=3, it means that 3 '0' characters of normal format can fit in that space). Will the values with fractions work correctly (i.e. will width=3.5 correspond to 3.5 '0' characters)? If no, how to adjust for that?
Note. In the current situation, additional rows and colums will have to be inserted, so the solution should work with new rows and columns as well.
I have a spreadsheet in which double clicking on any of the cells in the range A4:C17 changes the contents of cells F4:I33. The following code tells me which is the active cell and then pulls the values for F4:I33 from a lookup table based in this.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Range("B100") = ActiveCell.Address() Cancel = True End Sub
code to stick in this (probably after the third line) that autosizes rows 4 to 33. There are no merged cells involved.
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
inability to set a default row height and still allow the occasional row that requires more space (i.e., one of it's cells has multiple lines of wrapped text) to AutoFit if necessary.
Say you have the data shown in NormalSettings.png in an Excel file (see attachments) and you want to have a little more room between the shorter rows, but not have them all set as big as the expanded rows. One way to do this in bulk is to select the entire spreadsheet and set a fixed row height, but this chops off any cells that require more space than your default height (see FixedRowHeight20.png). The only way to fix this is to manually scan through your sheet and individually select all rows with cells that need more room than your preferred row height and AutoFit them (good luck if your spreadsheet is any size...) . If you try selecting the entire sheet and choose Format-Row-Autofit, you're back to the crowded display shown in 'NormalSettings.png'.
My workaround to this annoying problem is this: choose a column that you're not using (I just select the very last column in the sheet by holding down CTRL and pressing the right arrow until the screen stops moving) and highlight the entire column by selecting the column header. Then increase the font size for that column...voila, even your blank rows will now AutoFit to the new font size rather than the font size you are using for your data...effectively increasing your default row height without sacrificing AutoFit capabilities. I find that using 16 as a dummy font size makes my data (which is font size 10, Arial) look nicely spaced out, but experiment and try stuff until you find what you like!
I am building up a formatted invoice, line by line all of which is working well from the data point of view but no quite so well from the presentation point.
My text is all in Arial 12pt and I have the row height set to "Auto" and cell alignment to wrap text (at least one cell per row often has 3-4 lines of text so I need "text wrap" on)
My issue is that the printed output from a multi row invoice looks "crowded" and as this is the view the client gets to see (and hopefully pay ) the look is important. I tried to set the row heights to say .71cm but that causes the text wrap to stop working correctly.
I think I am trying to get some form of "inside top" and "inside bottom" adjustment / fill / padding (which is what I would do if I was using some form of documentation tool like Madcap Flare for example) but I cannot see how to do it in excel.
I have a range named "rngOrders" on an Excel 2003 worksheet. I'm looking for a VBA macro that will set the row heights of the range to autofit (for rows/cells with wrapped text) and also set a minimum row height of 19.5 points for all rows.
I need to set the height of all the rows to 18.00. I need to set the width of all of the columns to 12.00, except for columns A, C, and T, which need to be at a width of 28.00.
I have a section of my sheet to have the data in the cell word wrapped.
Is there any way to set it up so the row height automatically changes when there is more than one line of data?
Right now if my cell reads:
The other day we went to the market.
It shows:
market.
Meaning only the last line of the data. I'd like it to automatically make the row height change to show the three rows. (And change any of the other rows where there is a cell with more than one line of data)
5 worksheets 30 columns per worksheet Total of 1300 rows of data across the 5 tabs
The row heights are not uniform across all worksheets but when I change them all down to 65536 on each sheet to height of 12, the file reduces in size from 11mb to 3mb.
It concerns me as it is almost like data could be getting lost.
