Refer to enclosed excel file, I have drew a chart base on the data in side. However, for the last column which is "SG Productivity(KUSD)", The column very small even cannot be seen, is there any way can enlarge columns in this field without changing other column? T
View 1 RepliesI have a number of cells where I've put to wrap text, but the cell size is not adjusting when I type past the size of the cells, how do I get the cells the get bigger automaticly to fit all the text but bigger in height not length?
View 2 Replies View RelatedIs there a way to get cells in a column to adjust their height automatically, or with a macro to account for text overflow/wrap?
For example, lets say a column is 200 px in width and it's height is enough to view a single line of text, and the column is set to wrap text. Now more text is entered into the cell and it needs to be re-sized to fit two lines of text.
Is there a way to create a macro button to have this done automatically?
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
View 9 Replies View RelatedI have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
View 9 Replies View Relatedway to get Excel to automatically expand the cell height when the text becomes to long to display. Is there something I am missing that will accomplish this, or do I need to write some VBA that will make the cell larger once the character limit that will fit on one row is exceeded?
View 7 Replies View RelatedI have an Excel 2003 spreadsheet. I cannot increase the row length beyond 548 pixels or 409.5. And similarly, there is one column that I cannot increase beyond 1788 pixels or 254.71 . Now, I can increase the size of rows via going to print preview and editing the margins, but it merely shrinks the size of the paper and I cannot re-expand it to fit.
View 4 Replies View RelatedI have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.
Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub
I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).
how to automatically set a text box size to display text contained by right-clicking the textbox and put a check in the auto-size box under "Alignment".
However I would like to set the widht of the text box and automatically adjust the height according to the number of lines of text. Is this possible by VBA code or othe means?
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
This is an example of my data, lets say they are heights of trees. The number is the tree individual, t2 is the age of the tree, height_t2 is the height of the tree at the age t2, and t_ current is the age of the tree individual at present/current. I would like a formula for the t_current column that will pick out the current age of the tree individual and apply it to the age years previous. i.e the t_current age should be repeated for each height measurement for that tree individual, i have filled it in as an example.
Numbert2(age)Height_t2t_current
11236
12486
13706
14836
15926
161006
21286
[code]....
How to adjust the shape of the chart in the worksheet? I try to write the code, but can not work.
ActiveChart.Shapes.ScaleWidth 0.87, msoFalse, msoScaleFromBottomRight
ActiveChart.Shapes.ScaleHeight 1.5, msoFalse, msoScaleFromBottomRight
How do I write a short piece of code that defines the specific height and width that I want to assign to an existing chart. The code will be added to existing code that I have that formats the chart in other ways. This needs to be able to work with any active chart selected, not a specific named chart.
View 2 Replies View RelatedI m working with bar charts and as I've heard these labels can be a bit of a pain. I've got the labels in roughly the right position 90% of the time however that other 10% has me in rolling fits.
My issues
1. A label within the chart area is wrapped on two lines, how could I restrict Excel from wrappign the label
2. A Labels position covers some of the data reported and thus makes the graph messy
how could I find the position of the end of the bar and also the length of the datalabel so I could reposition it. Note I am using 2003 and that I am trying to use
activeChart.seriesCollection(s).item(i).Datalabel.left
for finding the position although this is only really where im getting to. finding the wrapping position and also being able to manipulate the length of the label is proving tricky.
I am trying to get some help by adjusting my datarange dynamically based on what days I select. I would hope the chart could adjust to display for example 10/3/2008 to 10/10/2008 values and only those values.
I have been trying to figure out how the datarange varies in this post Dynamic Chart dataranges, I do not understand how to apply them to the charts source data. Ultimately Krish's chart would be ideal to understand and I belive is the keystone to where I am trying to go.
I have attached a sample of my workbook and the source data and chart I am trying to manipulate.
I have various charts others view and require the data range to change in 12 month intervals, ie Jan07 -Jan08, Feb07-Feb08. I currently move the ranges manually every month but find the it would be more interactive for others if a drop down combo box on the chart were used enabling the user to choose which intervals to view.
View 5 Replies View RelatedIs there a way to make a chart adjust automatically when you add to the source data? I'm trying to use a named range in order to power a chart (something like chart_data=offset(a1,,, counta(a:a),counta(1:1)); the range is working fine). When I put "chart_data" into the source field for the chart, it seems to work fine; it picks up the right range... But when I later add more data, the chart source data field seems to have converted my named range into a hard-coded range, absolute range. So the dynamical named range updates, but the chart doesn't and I don't see the new data. Am I doing something wrong that I need to tweak? Does what I'm trying to do just not work? Is there another way to make the chart pick up the new data without adjusting the range?
View 3 Replies View RelatedI have a VBA script that walks through the series of points on a chart and sets color based on other parameters unique to each point. Unfortunately, this doesn't see to work.
Running the following code, the .MarkerBackgroundColor and .MarkerForegroundColor commands seem to have no effect:
With myChtObj.Chart.SeriesCollection(1).Points(Counter)
.MarkerSize = 8
.MarkerStyle = xlDiamond
.Shadow = True
.MarkerBackgroundColor = RGB(250, 250, 250) ' These have no effect
.MarkerForegroundColor = RGB(0, 0, 0) ' These have no effect
.MarkerTransparency = 0
End With
Setting these parameters for the series as a whole does work, but not for individual points. Is this a known issue? Is this unique to the Mac version of Excel?
All of the functions' X Axis were given the same data (12,24,36,48), except ROULETTE and TOURNAMENT which were also given (60) for the X axis.
Why do the NORMAL bars aren't located on the place they should on the X axis?
For example, the 1st bar (from the left), should be a little more to the right. The others should move to the left.
I'm trying to use a radar chart with six variables, they range from 1.8 to around 23; obviously this doesn't present very well on the Radar graph; how to format and scale each individual axis?
View 1 Replies View RelatedI am working on the evaluation of a survey. I had 212 respondents which could be divided into three distinct groups. I would like to present the results of a question in columns that reflect the total frequency count in percentages. At the same time I would like those columns to be stacked in order to illustrate the contribution each group has made to that particular answer. I have attached an xls file with the data and a demonstration of the outcome I am trying to achieve.
I haven't been able to create the graph so that the columns display the total count in relation to all respondents on the one hand and at the same time are broken up into the individual groups. Among others, I have read the thread: http://www.ozgrid.com/Excel/stacked-column.htm but that doesn't answer my question as the Total there is actually the cumulative total of the other values.
I have a button for Column T that when clicked I would like to run through different column widths 25,35,45,55,65,75.
I've tried a case statement but it doesn't run through each case on the clicks.
I have an MS Access Data link (parametrized query) set up in Column A. (Specifically A5:B85). However, every time I change the value in cell G2 (the source of my A5 result), the width of column A always changes. Is there a way for me to get column A to "freeze" to a width size of my selection?
View 1 Replies View RelatedI'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
Is there any way to lock the dimensions?
I need to freeze the column and row height and width for a specific area in spreadsheet, so that it shouldnt be altered in future from any one using this sheet.
View 3 Replies View RelatedIs there a way to make a macro to make this true?
The WS is 300 rows,
The column width is 6.90
If LEN(B1)>147 then format ROW Height to 0.25
If LEN(B2)147 then format ROW Height to 0.25
If LEN(B300)
I have vba code to change column width and height into mm.
The code is taking alot of time to run and then hangs my excel session.
The code below calls two sub routines.
Sub Change()
Dim i As Long
With Application
.DisplayAlerts = False
. ScreenUpdating = False
End With
For i = 1 To 23
SetColumnWidthMM i, 3.5
Next i
End Sub...
The yellow highlighted column F (each Reason) in the sheet2 to be placed as main header in the next column and so on as seen in the sheet 3
If they have two similar item number with 2 different reasons - delete the duplicate item number and place the number in each column according to its reason as seen on row 16 on the sheet3
If they have two number with similar reason - just sum up the number
sample excel 2.xlsx
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB:
Sub SLCREPORTDATA()
Cells.Select
Range("F1").Activate
Cells.EntireColumn.AutoFit
Columns("H:H").Select
[Code]....
I want to know that can we adjust column or row width with keyboard.
View 1 Replies View Related