if i have a column of number that is not sorted(it cannot be sorted due to other requirements), is it possible to find the cell that reflects the nearest number that i want to look up?
View 4 RepliesIs there any way to determine whether a column is sorted? Like a property of a column like ".ascending" true or false?
View 9 Replies View RelatedI have a long list of names in Column A sorted alphabetcially. I dont know how long the list is.
I wish to find the start and end row numbers of names that begin with a specific letter, for example if the letter is B I want the first row number that starts with B and the row number that ends with B. Assuming the letter I want to use is in C1, here is what I came up with:
I need to round up the sum of a column figures to the next nearest quarter. For example: $1.11 would be rounded to $1.25, or say $1.83 would be rounded to $2.00. What formula would I need to do this? I'm using Excel 2000
View 2 Replies View RelatedI have a form to round to nearest quarter but if it is less than 1 hour I need it to round to a total of 1. Can this be combined in one formula.
I also need my time to be configured so that if the start time is a PM number then end time AM it does not figure right. is there a way to remove the AM/PM from time. I have already tried all the formats from number,time, & custom.
Attached is my form : Timesheet Form 2014.xlsx
I have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
Here is what I am trying to accomplish.
I have to columns.
I have copied column A from a PDF file. It contains entries like this, all in the same column:
5 0.002HP Direct- 26845 7/1959 Airesearch
This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.
I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:
325111
I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.
augmenting current code to select the column after a column. Current code is:
Code:
If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1
If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2
If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3
If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4
The next line should find the column after "Product Code".
I have a working formula that gives me the last value in a column using Index formula below. How can i slightly adapt the formula to find the maximum value in that column instead?
=LOOKUP(10^99,INDEX('Data Drop'!$A$15:$AZ$10000,,MATCH($H$9,'Data Drop'!$A$15:$AZ$15,0)))
How can i know name of the column.
Example:
want to look at a row and find out what column has a Y in it
View 10 Replies View RelatedUsing and array to go through a series of sheets and do stuff (Thanks Gerald and Von Pookie BTW). I have used code which finds the last row (varies from sheet to sheet), but not the last column (which also varies sheet to sheet).
Finding Last row
LastRow = Range("A" & Rows.Count).End(xlUp).Row
However this code doesn't seem to work for last column...sample...
LastCol = Range("A" & Columns.Count).End(xlLeft).Column
Is there a trick I'm not seeing? Does this only work using the 'Cell' function in VBA? If so, how would the line of code look? I'd really prefer finding the column letter as opposed to using the 'Cell' method if possible.
I am currently using the following code to find the last cell in a column that contains data.
lLastRow = ActiveSheet.Cells(Rows.Count, "a").End(xlUp).Row
Can anyone give me the version of this that would find the last cell in a row that contains data. The code would be used in a loop so I would need the row reference to be a variable.
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I have a large list of numbers in two columns. I need to know what numbers are in column A but don't appear in column B. For example if the numbers are 1 2 and 3 in column A but column B only has 1 and 2 I need to know that 3 is missing.
the only thing I can think of is doing =IF(A1=B1,"TRUE","FALSE") however typing this a thousand times would not be practical.
Is there a macro that can check column A against column B and tell me which ones are missing?
In a column i have multiple names, most individual names appear many times.
I want to find the names that have only one entry (appear only once)
Is there a vba that could search a column, and underline all the names that appear only once?
I have a 70x70 table where I teased out the largest 20 values. I'd like to utilize a formula to deliver the column headings (as well as the row) headings for each of these 20 values. VLookup and HLookup don't seem to work for me, and Index/Match seems to only work for single columns.
It might be worth mentioning that is highly unlikely that any of the values in the table are repeated.
I have one column that has over 120,000 rows. In the column it is split into sections. I can manually find the min max from each section but would like to know how I could do this automatically throughout the whole column.
Here is a sample of data.
Column A
20.3456
21.4567
22.5678
19.3456
18.4309
19.4789
[code]....
Why is lastRow always returning 1? Even after adding values to worksheet and running macro - its always returning 1 for lastRow.... Am i missing something here? Do I need to refresh worksheet or something? I just dont get it :/
.Range("B:B").End(xlUp).Row
Code:
Option Explicit
Private lastRow As Long
Private curRow As Long[code].....
I have a graph which is reading from a table. This graph is reading flows from a flow meter, but after reading data for over an hour the graph gets really squished. I'm looking at creating another graph with just the last 50~ values from one column. Is there a way I can create another table that only reads the last 50 values from one column?
View 6 Replies View RelatedIs there a way to find the minimum value in column B that corresponds to the two occurances of "Yes" in column A.
Column A Column B
NO 1
NO 4
NO 7
YES 6
NO 3
NO 9
Yes 2
[Note: the numbers are in column B.]
I basically want to return the # 3 from Column B.
I have serial numbers say 1 to 100 in column A. In column B i have values which are text and numbers combined. In column C I have similar values as in B.
Now, if any value in Column B appears in Column C, then in Column D It should tell me Yes or No or 0 or 1.
I basically want to know whether any value from Column B exists or not in column C. I tried Countif and Vlookup but didn't work.
In column A, I have a list of names.
In column B, I have a list of values.
I want column C to show me which name has the smallest value from column B.
In other words, if there are 5 names, I want ONE name to give me a value of 10 (for the smallest value), and the rest of the names I want to show zero.
I also have in column D another list of values.
In column E, I want to show first, second and third place amongst the list of values from column D. The rest of the names I want to show zero.
I have three columns of names. I need to loop through the first two checking to see if any name is in the third column and if so, place a 'found' in a fourth column.
View 9 Replies View Relatedhow I can get the userform to close when another worksheet is selected. what I really need is for the userform to just show on one worksheet (not close) Is that possible? If not I want to be able to re-size the userform when another worksheet is selected (like getting it to minimise)
View 2 Replies View RelatedLets say I have a column of data and there are many sub parts.
A
John
Apples
xxx
Banana
Peter
Apples
xxx
Banana
yyy
How do I modify the range. find to locate the 2nd "Apples" , 29th "Banana" and so on or is there another method ?
When it is sorted by ascending and next time when they click header I want it to be sorted by descending.
Right now I have implemented to sort Descending . Now how will I check in which order does it sorted?
If know the order in which it is sorted currently then I will sort it in the opposite way..
I have a data set of about 600 records. I want to be able to extract the Top 10% of the records and get rid of the other 90% - the values can change over time, so I always want to start with the full 600 records.
I am aware of the conditional formatting function that will identify the Top 10%, but I was looking for VBA language (does not have to be VBA - just automated), that calculated the 10% subset and either moved it to a different sheet, OR deleted the bottom 90% - in either instance the result being just the list of the top 10% of the data set.
I have a list of entries on one sheet. This sheet contains part numbers in random order. I would like to draw out the part numbers onto a new sheet, with no repeats and in numerical order. I want this to be done automatically without using a sort command. Also, I would like to avoid VBA if possible.
View 8 Replies View RelatedI have a table (Sheet 1) with four columns data, A,B,C and D. There are about 60,000 entries in them. In Sheet 2, I wish to enter a value in A1 which will be from A OR C columns of Sheet1 and get its corresponding value from B or D (Sheet1) in B1 (Sheet2) with the help of a formula. i.e. IF(A1, Sheet1!A60000:C60000, then B1 = B or D of Sheet1).
View 2 Replies View Related