I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.
View 6 Replies View RelatedI am using the following code to find an emtyRow, but I actually need to find an emptyRow and test all the cells of the rows from A thru O to insure that there is nothing in any of the next emptyRow. How would I change the code?
VB:
Private Sub SubmitButton_Click()
Dim emptyrow As Long
'Make sheet1 active
Sheets(1).Activate
[Code] ......
I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 Replies View RelatedI want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
Range("B20").End(xlUp).Offset(1#).Value = Range("C1").Value
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code:
Sub seconddatatransfer()
Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet
Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension
Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension
Set sh1 = wb1.ActiveSheet
Set sh2 = wb2.Sheets("Tracking Sheet")
sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
[code]....
I am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
'Copy SUSD data to datbase
Sheets("Summary - SUSD").Select
Range("SUSD_DATA").Select
Selection.Copy
Sheets("SUSD Database").Select
Range("b6" & LastRow + 1).Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
' Sort Data..............
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies View RelatedI am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:
Formula:
[Code]....
And many of the variations of it when there are no empty cells in the range.
For a range of that contains empty cells I've tried this:
Formula: [Code] .....
And variations of it. It does not work, and I don't know why...............however..........
I ran across this on another [SOLVED] thread and it does work:
Formula: [Code] .....
I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?
It strikes me that this strategy likely has application elsewhere, too.
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View RelatedI'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I need to write a VBA code to remove the value of the cells in column B if the value in column A is empty. In my excel sheet, the user will paste hyperlinks in column B. If any link does not meet certain conditions, the cell in the same row in column A will be empty.
I want to have a change event so that after pasting links, it automatically deletes the links from the cells in column B if the cell in column A is empty
Formula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedI have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
Here is what I am trying to accomplish.
I have to columns.
I have copied column A from a PDF file. It contains entries like this, all in the same column:
5 0.002HP Direct- 26845 7/1959 Airesearch
This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.
I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:
325111
I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.
augmenting current code to select the column after a column. Current code is:
Code:
If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1
If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2
If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3
If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4
The next line should find the column after "Product Code".
I have a working formula that gives me the last value in a column using Index formula below. How can i slightly adapt the formula to find the maximum value in that column instead?
=LOOKUP(10^99,INDEX('Data Drop'!$A$15:$AZ$10000,,MATCH($H$9,'Data Drop'!$A$15:$AZ$15,0)))
How can i know name of the column.
Example:
want to look at a row and find out what column has a Y in it
View 10 Replies View RelatedUsing and array to go through a series of sheets and do stuff (Thanks Gerald and Von Pookie BTW). I have used code which finds the last row (varies from sheet to sheet), but not the last column (which also varies sheet to sheet).
Finding Last row
LastRow = Range("A" & Rows.Count).End(xlUp).Row
However this code doesn't seem to work for last column...sample...
LastCol = Range("A" & Columns.Count).End(xlLeft).Column
Is there a trick I'm not seeing? Does this only work using the 'Cell' function in VBA? If so, how would the line of code look? I'd really prefer finding the column letter as opposed to using the 'Cell' method if possible.
I am currently using the following code to find the last cell in a column that contains data.
lLastRow = ActiveSheet.Cells(Rows.Count, "a").End(xlUp).Row
Can anyone give me the version of this that would find the last cell in a row that contains data. The code would be used in a loop so I would need the row reference to be a variable.
In my massive spreadsheet, there are a few random bits of data entered into the last column that is in use and I wish to empty it. I can't provide the full spreadsheet unfortunately, but the sheet is called "output", one of a view, and the last column is about 200 along. Most of the data entries are down towards the 400th row or so, but will be random. The sheet I have attached should make it roughly clear what I'm after, but in my the sheet "output" of my larger workbook.
View 2 Replies View RelatedI have a large list of numbers in two columns. I need to know what numbers are in column A but don't appear in column B. For example if the numbers are 1 2 and 3 in column A but column B only has 1 and 2 I need to know that 3 is missing.
the only thing I can think of is doing =IF(A1=B1,"TRUE","FALSE") however typing this a thousand times would not be practical.
Is there a macro that can check column A against column B and tell me which ones are missing?
In a column i have multiple names, most individual names appear many times.
I want to find the names that have only one entry (appear only once)
Is there a vba that could search a column, and underline all the names that appear only once?