I have serial numbers say 1 to 100 in column A. In column B i have values which are text and numbers combined. In column C I have similar values as in B.
Now, if any value in Column B appears in Column C, then in Column D It should tell me Yes or No or 0 or 1.
I basically want to know whether any value from Column B exists or not in column C. I tried Countif and Vlookup but didn't work.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
The whole "story" is explained, in details, inside the attached WB.
View 3 Replies View RelatedI'm trying to create a questionnaire and in each question you got to rank the answers 1, 2, 3 and 4 according to your preferences.
So I'm trying to use data validation to allow ranges between 1 and 4 and at the same time I'm trying to use =countif($A$1:$A$20,A1)=1 to prevent repeating selections but my problem is that with the data validation tool I can only select one of those options either allowing whole numbers between 1 - 4 or allowing custom and using =countif($A$1:$A$20,A1)=1.
Is there a way to do both?
I have a 3 column table, the first column is always populated with email addresses, the second column will have secondary email addresses if that person has one, I want a formula in the third column to have the secondary email address if it exists, if it doesn't I want it to have the address from column one.
View 4 Replies View RelatedI have a cell with data separated by hashtags and the letter 'x'
For example #1001x1 refers to a product code and x1 being the quantity.
#1002x2#1003x1# would become:
CODE
QTY
CODE
QTY
1002
2
1003
1
I'm currently using the code:
[Code].....
Sometimes there will be files when there will be lots of codes to delimit, but sometimes there will be no codes to delmit.
So when there reference will only be #1001x1# the above code will try and delimite the next column along (column G) but there is nothing there to delimit and the error code "No data was selected to parse" pops up.
What I'm trying to ask is, is there a way to make a macro that only delimit columns with data.
I have a list in a column and just want to count how many of each entry exists and place that number in another list:
Column A Column B Column C
abogado 4 abogado
abogado 7 mammamia
abogado 8 trifecta[code].....
An image is here: 12.23.2013-13.59.36 - joezeppy's library
I want to create a table that lists the number of entries for each cell in column a and then lists the entry next to it. Can I use a pivot table or something?
i need a formula that tells me if a value exists in a column. for example if there is a value in a cell in the b column of 23 no matter where it is, i want cell c25 to return the word "yes".
View 2 Replies View RelatedI'm trying to do a formula without using a marco. The formula would do the following:
- Highlight value in column A if the value is found in column B and on the same line value in column F and I are equal to zero;
- Value in column A could match many value in column B
I tried everything I know but can't seems to make it work.
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
I have working data on list sheet and added data on compiled sheet.
I need to match duplicates and delete these rows from compiled sheet.
I've tried coping to the list sheet and use "Remove Duplicates", but it rids me of the data that has been processed and has fills applied.
I'm looking for a macor that can do this work for me without losing data on list sheet.
This data reaches into the thousands and I'm looking to run this off the CASE column.
Im trying to write a formula that will check if a name that I have in column A also appears in column B and if it does I want it to return a value for example TRUE in column C.
I'm currently doing a survey and I have all employees in column A (600persons) and then column B I enter thos that have taken the survey. So If an employees name exist in column B he/she has done the survey and then they I get the value "TRUE" or "1" or something else. So in this way I can easily see who has and who hasn't done the survey. I've been trying with VLOOK and so on but I can not get it right? Maybe I need VBA?
I require a row of details to be copied to another worksheet by typing in a unique ID using a macro so Sheet 1 is a data base of items (every item have a unique code like 1001, 1002 etc) and sheet 2 has a table, and next to the table is a cell, which i need to work like a search engine.
i need to be able to type the unique id in a cell, in sheet 2, then click an Add command Button. This button then finds the unique id in sheet 1, and copies all the items details in the same row, into sheet 2 in the table, then i require the search engine to be cleared for the next item to be added. (Assumed Experience:Below Average, I know few formulas and know very basic macros)
I have an excel worksheet that creates the total arival/departure time for workers. In the "ore lucrate" column i need a formula that checks wheater or not in column b exists text, if it does then check if cell r12 is bigger than one hour and the substract exactly one hour from it, i.e. 03:45 needs to be 02:45. However if it's not bigger than an hour then put the result as it it (r12). And finally if the adiacent cell in "ore lucrate" doesnt contain text then it should be left as the folowing 00:00.
View 4 Replies View RelatedI have the following code, but it takes longer than expected to run. Is there anyway to speed this up? I am not sure if autofilter is a option. I just want to search through range A16:Z16 and if the word "FALSE" exists delete the entire column. The word "TRUE" is the only other word that would exist in range A16:Z16
[Code]....
I know how to separate data into different columns i.e. Marry Johnson into two separate columns; however, I have data in different rows that I need separated into different column. See screen cast [URL]
Using excel 2003 on windows 7 64 bit
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies View RelatedOne has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name
And the other column lists the names as first name and then last name without the comma
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
Here is what I am trying to accomplish.
I have to columns.
I have copied column A from a PDF file. It contains entries like this, all in the same column:
5 0.002HP Direct- 26845 7/1959 Airesearch
This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.
I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:
325111
I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.
augmenting current code to select the column after a column. Current code is:
Code:
If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1
If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2
If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3
If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4
The next line should find the column after "Product Code".
I have a working formula that gives me the last value in a column using Index formula below. How can i slightly adapt the formula to find the maximum value in that column instead?
=LOOKUP(10^99,INDEX('Data Drop'!$A$15:$AZ$10000,,MATCH($H$9,'Data Drop'!$A$15:$AZ$15,0)))
How can i know name of the column.
Example:
want to look at a row and find out what column has a Y in it
View 10 Replies View RelatedUsing and array to go through a series of sheets and do stuff (Thanks Gerald and Von Pookie BTW). I have used code which finds the last row (varies from sheet to sheet), but not the last column (which also varies sheet to sheet).
Finding Last row
LastRow = Range("A" & Rows.Count).End(xlUp).Row
However this code doesn't seem to work for last column...sample...
LastCol = Range("A" & Columns.Count).End(xlLeft).Column
Is there a trick I'm not seeing? Does this only work using the 'Cell' function in VBA? If so, how would the line of code look? I'd really prefer finding the column letter as opposed to using the 'Cell' method if possible.
I am currently using the following code to find the last cell in a column that contains data.
lLastRow = ActiveSheet.Cells(Rows.Count, "a").End(xlUp).Row
Can anyone give me the version of this that would find the last cell in a row that contains data. The code would be used in a loop so I would need the row reference to be a variable.
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I have a large list of numbers in two columns. I need to know what numbers are in column A but don't appear in column B. For example if the numbers are 1 2 and 3 in column A but column B only has 1 and 2 I need to know that 3 is missing.
the only thing I can think of is doing =IF(A1=B1,"TRUE","FALSE") however typing this a thousand times would not be practical.
Is there a macro that can check column A against column B and tell me which ones are missing?
