Follow Cell Address Stored In A Cell
Mar 22, 2012
I have three columns:
Column A: Old Value
Column B: New Value
Column C: Cell address of the old value, which is on a different worksheet. For example: Sheet1!$A$1
What I'm trying to accomplish with a macro/VBA is:
Copy the new value from cell B2
Paste the value into the cell address listed in cell C2
Repeat for row 3 and so on, going down 100 rows in total.
Should I make the addresses in column C hyperlinks and follow the hyperlinks somehow?
View 1 Replies
ADVERTISEMENT
Apr 10, 2007
how would I, with a macro, follow a hyperlink in a cell.
cell c3 holds the hyperlink, how would i get the macro to follow it
View 9 Replies
View Related
Mar 7, 2014
I have two sheets.
On sheet one (named Master) I have:
Apples
Cantaloupes
Bananas
On sheet two (named Customer) I have the following formulas
='Master'!A1
='Master'!A2
='Master'!A3
Now, if I install a filter in the Master sheet, and sort alphabetically the link formulas on sheet two remain the same, and because of that, in sheet two they would be in alphabetical order as well. BUT what if I wanted the links on sheet two to follow the actual cell in the master sheet, so that even after a sort, the links on sheet 2 would show the same values, so the formulas on sheet two would end up looking like this (DESPITE being sorted on the master sheet)
='Master'!A1
='Master'!A3
='Master'!A2
Basically I would want the linked cells on sheet 2 to represent a static value no matter where it was moved to on the static sheet.
View 5 Replies
View Related
Feb 19, 2007
does anyone know of a way to amend this to add the cell to a range say "All_blue" to then copy and paste special values.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) ...
View 4 Replies
View Related
Feb 23, 2014
I have tried numerous versions of macros I found. Most get the same error of; Range object error or script error.
Here is the formula: VLOOKUP(C$13,VESSELS_DATA,ROW(30:30)-12)
What I would like to do:
1) double click to on the cell with the formula
2) goto the worksheet "DATA_TABLES" that contains the Named Range "VESSELS_DATA"
3) go down the rows until the c13 is matched
4) offset column the same as in the above formula "Row(30:30)-12"
View 9 Replies
View Related
May 20, 2014
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
View 2 Replies
View Related
May 31, 2006
Sheet names in Col B
B2 : Sheet1
B3 : Sheet2
Etc
I tried
=INDIRECT(B3,$J$58)
at C3 where $J$58 is the cell I would like to reference on 50 different sheets
Formula returns #REF!
Col C ref's $J$58
Col D ref's $L$58
Col E ref's $N$58
Col F ref's $P$58
So as I copy the 4 formulas down, the ref to the correct sheet should update but the cell ref's should remain
View 2 Replies
View Related
Aug 21, 2007
Column A contains numeric values that refer to a row number in column B. I need the value in column B to be outputted in column C. eg. if the value in Row 1 Column A = 55, the value in row 55 column B will be outputted in column C
View 3 Replies
View Related
Jun 14, 2008
how to read mutiple values from one cell. For example i want to have one cell for site visits, and there may be more than one. So i want to let the user enter more than one date seperated by a ",". Is there anyway of going about this?
View 5 Replies
View Related
Oct 2, 2009
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5)
b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5)
b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
View 9 Replies
View Related
Dec 2, 2009
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies
View Related
Mar 12, 2014
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
View 1 Replies
View Related
Oct 25, 2009
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
View 6 Replies
View Related
Mar 16, 2009
How can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.
View 2 Replies
View Related
Mar 10, 2008
I have this certain value "Y" in all the sheets. In the summary sheet, I would like to get the cell address for this value in a given sheet. I know that you can get cell address using CELL worksheet function. However, for that you need to know the reference to the cell, which is what I am interested in.
I tried Hlookup to get column #. But couldn't figure out how to convert the number to letter so that I can use MATCH to get row # and then finally, index or address function to what I am looking for.
If someone knows how to convert column # to column letter OR knows a better/easier way to obtain cell reference/address based on cell value,
View 9 Replies
View Related
Jul 16, 2008
I am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
View 9 Replies
View Related
Sep 21, 2007
Display Alert On Closing If Cell Not Filled In
How do I alter this code so that it acts like an INDIRECT function so will pick up a cell reference in another cell?
I can't just use A1 as I want this to change dynamically.
View 4 Replies
View Related
Oct 10, 2007
I have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
View 4 Replies
View Related
May 22, 2008
how can I use the cell function inside a NPV fuction as one argument of the start for the NPV string to calculate?
View 3 Replies
View Related
Jan 22, 2007
Is it possible to input a cell address in a VBA macro by clicking in that cell?
View 9 Replies
View Related
Dec 1, 2007
If I added two numbers together in one cell - how can I use the result as a cell address? example. A3=23+5 now I want to use A3 (or 28) as a cell address resulting in D28
View 4 Replies
View Related
Jan 15, 2008
I have 2 sheets. In the first sheet, I have 3 columns. The first column contains transaction codes. The 2nd column contains the destination code (like a mapping cell where the value of the 3rd column would go but in a different sheet/2nd sheet) and the 3rd column contains the values for it. Would it be possible to reference a destination in a cell itself? Or should I just code it individually? I wouldnt want to reference each data one by one because the total would be 480 reference cells. Is there an easier way?
View 9 Replies
View Related
Feb 6, 2014
In VBA how do I specify the value of a cell in the formula instead of the cell address?
In the case below the result of the given cell is =E18*$A1$
What I want is this: =E18*0.3 (where 0.3 is the value of $A$1)
View 3 Replies
View Related
Dec 17, 2008
I have two columns in my worksheet that represent a graph: the A column has x values and the B column has y values. I want to be able to find the x value that corresponds to the max y value.
I am currently using:
=CELL("address",INDEX(B1:B2005,MATCH(MAX(B1:B2005),B1:B2005,0)))
This function gives me the cell location of the y max, but is there a way to convert this to the corresponding x location? For example, if the above function outputs $B$1569, I want to know what the value of $A$1569 is.
View 3 Replies
View Related
Feb 29, 2012
I have a workbook defined name ("Moving_Cell") that returns the cell address of another named cell ("Ending_Balance") that moves around in a worksheet.
Right now I have a macro which includes:
Range("L39").GoalSeek Goal:=0, ChangingCell:=Range("Interest_Rate")
I want to substitute the hard-coded "L39" with the cell address determined by the formula in my workbook defined name "Moving_Cell" but I can't seem to get the syntax correct.
View 6 Replies
View Related
Jun 12, 2009
how to Get a last cell but one only address
View 6 Replies
View Related
Feb 1, 2009
regarding the cell value. What i am trying to do is I have alot of cells with datas and in cell(1,8) I have a data. I will search through these cells and if they match with data of cell(1,8), it will return me the cell (x,y) with x and y being the row and col numbers. Is there any command that I can continue with the below code to get the x and y?
For Each cell In Range(Cells(3, 4), Cells(500, 26)
If cell.value = cell(1, 8).value Then
View 9 Replies
View Related
Jun 2, 2009
I have a variable Num that covers the range of C5, C6, and C7. I would like to figure out how to write the code that grabs just the column portion of say C5.
Set Num = Range(Range("C5"), Range("C5").End(xlDown))
Something like,
Range(Column(Num), 3).Value or something like that
View 9 Replies
View Related
Oct 23, 2009
I have created the below formula to return an address. I need to use this address in the second formula ("cell address here"), If i am completely off base please point me in the right direction..
=CELL("Address",INDEX($BO$23:$BO$40,MATCH($BE$4,$BO$23:$BO$40,0)))
=OFFSET("Cell Address here",10-$BI$1,0,1,1)
View 9 Replies
View Related
Oct 30, 2009
I am trying to write a line for my little project but came to a stop as I do not have enough knowledge on how to get around this.
Most likely its something very simple but I'm not an expert so hopefully someone here can put me out of my misery.
I am trying to get this to work:
Function IF(AND(sheet!A1=sheet2!A1),x,y) works fine but for what I need to do I need to get sheet2!A(1+B1) As soon as I do that it all goes funny. In B1 I have a number that determines by how many cells A1 needs to be offset but I cannot get the syntax right.
View 2 Replies
View Related
