Display Alert On Closing If Cell Not Filled In
How do I alter this code so that it acts like an INDIRECT function so will pick up a cell reference in another cell?
I can't just use A1 as I want this to change dynamically.
I have the following task
1. in sheet 1, column A starting A1 I have addresses of web pages. all of them are one and the same except the last digits. Sth like this
www.datapage.com/source1
www.datapage.com/source2
...
...
www.datapage.com/source16
www.datapage.com/source17
etc
2. in sheet 2 I have to import the data from these web sites as it follows
from www.datapage.com/source1 starting from cell A1
from www.datapage.com/source2 starting from cell A101
from www.datapage.com/source3 starting from cell A201
etc.
The question: I am trying to write a Macro that tooks the address from sheet 1 cell A1 and import the data through web query using the address in the cell and import it in sheet 2 starting cell A1. Then loop and took the address from cell A1 in Sheet 1 and put it into sheet 2 cell A101 etc.
I have one excel workbook which has 10 rows of data. I need to access another excel wb which has 10 rows of data and get the variance. The key here is wb 1 has the data as I manual gather it and it changes very often. WB 2 also changes to equal the number of rows in Wb 1.
A> I would like to call Wb 2 from Wb 1 and copy those 10
B> It should be able to handle change in the number of rows in WB 2
C> It should be able to call workbook 2 irrespective i name it differently.
Is there a way i can achieve all the 3 above?
I've recently discovered the usefulness of VB in excel and have managed to write some basic macros that enhance many of my workbooks. BUT, I've bumped into a problem I can't seem to solve. Please help!
I'm looking to import the values in a large range of cells ( 5 x 5000) in a closed workbook into a range that i specify in an open one, where both workbooks are housed in the same directory. I also want to include logic that allows me to move the 2 files to different directories (the names will never change, only the paths) and have the code still work--I believe i'd use relative path references?
I've found lots of snippets of code on the topic but can't seem to get any of them to work. For instance: http://spreadsheetpage.com/index.php...a_closed_file/
Problem is, I'm so new that I don't even know where to begin pasting the code (objects vs. modules, etc) in the VBA editor.
I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.
How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?
For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range
LineID_Value = LineID.Offset(0, 8).Value
'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then
ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value
'End If
End With
Next LineID
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I use the following code to read information from the Global Address Book in Outlook, and it works. Do any of you know how I can read the Email-address and alias-Name as well? By other word more information from each record. The code below will give me the name only.
View 4 Replies View Related For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
With C
If IsDate(.Value) Then
.Offset(0, 3).Value = Format(.Value, "yyyymmdd")
Else
.Offset(0, 3).Value = Right(.text, 4)
End If
End With
Next C
which is supposed to read the cell offset 3 to the right, and then set to either YYYYMMDD or YYYY depenig on the value in the cell. I'm not sure how to specify the first part of this line - .Offset(0, 3).Value = Format(.Value, "yyyymmdd") - it keeps reading the cell in column A, rather than the offset cel.
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
View 5 Replies View RelatedI searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5)
b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5)
b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies View RelatedIf a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
I have a workbook 'logsheet' were i enter data like 'coil, supplier, thickness, width' and 'lot'. This happens 7 times on one logsheet. When the logsheet is filled, a new copy is created (from a hidden empty logsheet).
I want this data to copied to a seperate sheet - eg called data - in same workbook so that it can be used in other workbooks as external data.
I want to enter a formula on the logsheet worksheets and not on the data logsheet because the amount of logsheets (and coils) is unkown and can vary each lot.
Is this possible with formulas eg copyto? (if that formula exists ><)
Is it possible to add data from worksheets that still have to be created from the empty logsheet
I need to select a worksheet from another workbook.
I want use a cell contains which contains a date that corresponds to the worksheet's name in the other workbook.
How can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.
I have this certain value "Y" in all the sheets. In the summary sheet, I would like to get the cell address for this value in a given sheet. I know that you can get cell address using CELL worksheet function. However, for that you need to know the reference to the cell, which is what I am interested in.
I tried Hlookup to get column #. But couldn't figure out how to convert the number to letter so that I can use MATCH to get row # and then finally, index or address function to what I am looking for.
If someone knows how to convert column # to column letter OR knows a better/easier way to obtain cell reference/address based on cell value,
I am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
I have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
View 4 Replies View Relatedhow can I use the cell function inside a NPV fuction as one argument of the start for the NPV string to calculate?
View 3 Replies View RelatedI have a table that lists names, eligibility and # of people. That is just one worksheet. I have a total of 30 worksheets in that workbook. The column with the names is completely filled out. I entered a number in the eligibility and # of people columns and Excel copied all three cells (name, eligibility and # of people) to the same cells on all of the worksheets. I have no formula in any of the cells, nor do I have anything linked.
Example:
1st worksheet - e19 - John Doe, f19 - Yes, g19 - 4
That information is then put on all of the other worksheets in those same cells, even though the worksheets are not linked in any way.
At the moment, I have a project where everyone is putting work data on seperate workbooks. Each months work is placed onto another worksheet within that workbook.
The supervisor has his own workbook, that grabs data from each of the workers books. Getting the data is easy enough, however because the supervisor has barely any knowledge of computers, I would like to make it as easy to set up for future months.
Right now, data is collected in each cell using the following formula:-
='[otherusersworkbook.xls]December 2009'!$C$620
Is there a way of getting that phrase to substitute the part that says "December 2009" with whatever is put into column A on the same row?
i have fixed headings in row 1. these could use up to 20 columns
in row 3 i could put data under any of the column heading
if i put data in any of the columns i would like a new worksheet created. the name of that worksheet to be the column heading not the data i have just entered. if no data is entered then no worksheet is created
i want a formula reading the value of a cell and then using it to insert the value of another cell. example:
125 =s125
289 =s289
have seen macros that create a seperate sheet & save by tab number etc, & wonder if its possible to save each sheet in a workbook as the value defined in each sheets cell A2. is there a vb macro available to do that ? if so where ?
View 9 Replies View RelatedI have three columns:
Column A: Old Value
Column B: New Value
Column C: Cell address of the old value, which is on a different worksheet. For example: Sheet1!$A$1
What I'm trying to accomplish with a macro/VBA is:
Copy the new value from cell B2
Paste the value into the cell address listed in cell C2
Repeat for row 3 and so on, going down 100 rows in total.
Should I make the addresses in column C hyperlinks and follow the hyperlinks somehow?
Is it possible to input a cell address in a VBA macro by clicking in that cell?
View 9 Replies View RelatedIf I added two numbers together in one cell - how can I use the result as a cell address? example. A3=23+5 now I want to use A3 (or 28) as a cell address resulting in D28
View 4 Replies View RelatedI have 2 sheets. In the first sheet, I have 3 columns. The first column contains transaction codes. The 2nd column contains the destination code (like a mapping cell where the value of the 3rd column would go but in a different sheet/2nd sheet) and the 3rd column contains the values for it. Would it be possible to reference a destination in a cell itself? Or should I just code it individually? I wouldnt want to reference each data one by one because the total would be 480 reference cells. Is there an easier way?
View 9 Replies View RelatedI've got several workbooks that users will be using to keep track of individual projects. These workbooks will talk back to a master summary sheet that has the status of all projects on it. The possibility exists that someone else on the network will have the summary book open when the program tries to update it, which would cause an error when it opens as read only. So I want to do something like this.
View 2 Replies View Related