For Loop With Range Variable
Apr 28, 2014
I'm trying to understand a code from work and I can't get it. I copied only a part of the code here so please don't run it. Also, I have manual inputs in columns L and M (nodes labels such as 1, 2 and 2,3) and section labels on column N (such as BarFT3, BarFT4 etc):
[Code] ..........
What is this loop doing? I just get the first For loop: goes through every lable on colum N (from 1 to ne) but then what?
What is happening to range nudo(n,j)? How works this ">" sign between nudo(n.j) and nn?
View 1 Replies
ADVERTISEMENT
Mar 14, 2014
I have a lot of loops, but they are not necessarily nested within each other. Is it possible for me to use the same variable if those loops are not nested.
For example, something like this:
Dim a As Integer
For a=1 To 5
[Lines of code]
Next a
Then I want to just continue using "a" in other loops:
For a=12 To 100
[Lines of new code]
Next a
This way, I don't have to create a new variable every time. Would this be okay? Or is it hard on the memory?
View 2 Replies
View Related
Dec 18, 2008
Is it possible to use a variable to set the end of my for loop.
I only want the loop to continue while each row in worksheet 3 contains data
I have tried this as shown by creating a "TotalRows" Variable as shown in the code but i cant get it working.
View 10 Replies
View Related
Jun 29, 2013
I'm trying to use loop to activate 3 workbooks "OSB1", "OSB2", and "OSB3" and their respective sheets. "OSB1" has sheet "OSB1" in it, workbook "OSB2" has sheet "OSB2" in it etc.
The digit on the end of each OSB is the variable I am using in the loop.
What I am trying to come out with is the following 3 workbooks and sheets being activated:
OSB1.Sheets("OSB1").Activate
OSB2.Sheets("OSB2").Activate
OSB3.Sheets("OSB3").Activate
I've given up the code as I can't work out the inverted commas:
VB:
Dim x As Integer
For x = 1 To 3
OSB" & x & ".Sheets("OSB" & x & "").Activate
Next x
Is it possible to do this at all? The bit after "Sheets" is correct. It's part with the first "x" after the first "OSB" which is incorrect now...
( In my actual code I'm trying to do more than just activate the 3 sheets but need to work out the syntax for this to be able to edit the remainder).
View 9 Replies
View Related
Jul 30, 2014
I have a list of Variables Dimentioned a Range. They are sequential; ie. A1, A2, A3, etc. How do I write the code to switch between these? Obviously, I am looking to correctly reference ("A" & aNo).
Code:
For Test = 1 To aNo
With ("A" & aNo)
.Select
[Code]......
View 9 Replies
View Related
May 20, 2006
Trying to code my first custom VBA function. The function is supposed to translate the words in a cell by repeatedly looping through the string and looking through a list of provided translation words.
Problem is the variable name changes with each loop, and I can't figure out how to program the name change.
Function TestTranslate(TranslateCell, ProductCell) As String
Dim t As Long
Dim TranslateCeiling As Long
Dim SS1 As String
Dim SS As String
Dim Q, R As String
Dim W As String
Dim LLRString, MLRString, SLRString As String
Dim LRString, MRString, SRString As String
Dim TArray() As String
Looks like the loop keeps defining Q as "SS" & t instead of doing the select case formula. I tried removing the Q variable altogether and making it read just "SS" & t = Replace(R, LLRString, LRString) for example and keep getting a compile error.
View 9 Replies
View Related
Apr 15, 2012
I'm using a variable to loop down a column of data. Each time it loops the variable may or may not perform an operation - it will if there is something in the cell but won't if the cell is empty. It writes the answer of the operation to an ajoining cell, before looping again.
The issue is that if the row cell is empty, what's written to the ajoining cell is the pre-existing value of the variable, because its value hasn't changed.
how best to 'empty' the variable each loop to ensure either that the correct value or nothing at all is written to the ajoining cell?
View 5 Replies
View Related
Nov 10, 2006
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
View 5 Replies
View Related
Nov 21, 2006
I'm creating a user form that will have 10 checkboxes on it. Depending upon certain conditions being met elsewhere in the workbook, I would like to populate the checkboxes' captions with data from the workbook.
My question is, can I loop the procedure with the variable number included in the checkbox name (well, more to the point, HOW can I loop the procedure...)?
I would like to do something like this:
Dim a As Integer
For a = 1 To 10
With Worksheets("Hi-Tech")
If .Cells(a + 1, 2).Value "" Then
chkHiTech & a.Enabled = True
chkHiTech & a.Caption = .Cells(a+1, 2).Value
lblHiTech & a.Enabled = True
lblHiTech & a.Caption = .Cells(a+1, 2).Value
etc.
View 6 Replies
View Related
Oct 20, 2006
Excel file attached! I need a macro to do the following:
Start with cell F4 and read the increment value from cell C4. Then add this with F3 and display the result. Continue with the same increment until it reaches the value equal to cell B4. Then read the increment from cell C5 and do the same until value equals cell B5. Repeat the same step until it reach the value equals B7. I did manually in the column F4 to F28. Moreover, the cell increment will change according to the variable in A2. In this case it is 25 and got 25 values to fill the column R.
View 8 Replies
View Related
Mar 27, 2007
the following code should determine whether the searched value can be found in more than just one row and than enlist certain values from each of those rows in ComboBox4 using a loop. Then I have a second macro which would assign appropriate values from a Sheet to other text boxes whenever one changes the value of the ComboBox4:
Private Sub ComboBox2_Change()
Dim vFind
Dim Firstaddress
Dim rFound As Range
Dim wsName As String
Dim SrchRng As Range
wsName = Me.ComboBox1.Value
With Worksheets(wsName)
vFind = UserForm2.ComboBox2.Value
Set rFound = .Range("B1")
Set SrchRng = .Range("B:B")
Option Explicit
End With...............................
While trying to run the first macro an Error pops up saying that a variable within the loop is not set. I've got no idea how to fix it
View 9 Replies
View Related
Apr 4, 2008
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies
View Related
Apr 30, 2014
What I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
View 4 Replies
View Related
Mar 11, 2008
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
View 3 Replies
View Related
Feb 19, 2010
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
View 6 Replies
View Related
Jan 27, 2012
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
View 8 Replies
View Related
Jan 25, 2013
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
View 1 Replies
View Related
Jul 16, 2009
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies
View Related
Mar 6, 2008
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
View 3 Replies
View Related
Dec 6, 2006
on the syntax of things in VBA. here's a description of what i'm trying to do:
1) loop through a particular column ("N"), and compare the values (if not blank) with corresponding cells in another column ("V"). i.e. - comparing N1 to V1, N2 to V2, etc...
2) run If, ElseIf statements to display appropriate values in different column ("O"), but on the row that corresponds to the row the values in Step 1 are compared. i.e. - if N1 > V1 then cell O1 = value; if N2 > V2 then cell O2 = value; etc...
here's an example (but obviously not in proper syntax). hopefully someone can help me convert it to Excel VBA:
Function CalculateFR()
Dim Col1 As Column = ColumnN
Dim Col2 As Column = ColumnV
Dim Col3 As Column = ColumnO
Dim Cell As Cell
Dim IndexValue As Integer
For Each Cell In Col1
If Col1 > Col 2 Then
IndexValue = 5
Else If Col1 < Col2 Then
IndexValue = 4
End If
Next Cell
If Not IsEmpty(Cell) Then Col3 = IndexValue
End Sub
View 7 Replies
View Related
Jun 21, 2012
Code:
For lead = 1 To 20
CurrentFile = ActiveCell
Workbooks.Open Filename:=CurrentFile
ActiveWindow.Caption = "Graboid"
I have a file I use to grab information off a website I subscribe to.
I get daily emails containing a list, then I use that list to extract additional information for each item in the list.
View 8 Replies
View Related
Jan 12, 2013
I am trying to do Loop through Range I have workbook and it has two sheet (sheet1 and sheet2) sheets ("Sheet1").range(A1:K30") hold the Doc_ID (E.g. 78002)
What I want to do........if Range(A1:K30) = Inputbox("Enter Your Doc_Id Number") Then Copy that Cell Only and paste it to in Sheets("Sheet2") -Column A
View 6 Replies
View Related
Jan 12, 2014
I have a range of letter values. The values vary between A, a, and B. I have a "For Each" loop that doesn't do what I'd like. The way it's written, I'd think it'd delete every column that doesn't contain the letter "A".
Code:
For Each k In rngMyRange
If k.Value "A" Then
k.EntireColumn.Delete
End If
Next k
It seems to miss entire columns. Do I need to initialize k?
View 8 Replies
View Related
Nov 2, 2007
I have percentages in each row. Let's say from A4 to Z4. Each cell can be 20% at maximum In Visual Basic I want to write a macro that sums the cells up. So when the sum is less than 100% I want to distribute the remainder among the cells that are below 20%. I want to do this until the total is 100%. So the new percentages have to be entered in the appropriate cells.
How can I do this? I need some sort of loop but I can't get anything to work. With a 'for each cell' statement I always get Value#.
View 9 Replies
View Related
Aug 8, 2013
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
View 1 Replies
View Related
Sep 30, 2013
I tend to use a lot of For Each loops when I want to go through a range looking for something but this time I'm not so sure it will work.
I have 9 databases each containing over 400 rows with different pieces of client information, these databases are shared between around 40 people (I've also used the 'Allow users to edit ranges' utility to restrict access). What this means however is that the users cannot delete an entire row, instead they can only 'clear contents' on individual cells. This is fine until I try to generate statistics from the databases using autofilters which stop at the first blank row.
So I need to write a backwards for each statement that starts at the bottom and deletes all the blank rows on the way up to the top. I've tried similar things to this before using the For Each but when you use it to delete a row it sometimes skips the next row as it continues at the next one.
I've not managed to get it to work before, I'm just looking for a little guidance really as to how to do this correctly.
VB:
For TopRow = 1 To BottomRow = Range("A1").SpecialCells(xlCellTypeLastCell).Row Step -1
'If is blank delete row.....
Next
View 1 Replies
View Related
Sep 15, 2014
I am working with loans, and I'm trying to program a routine that adds every installment a client owes, so I can know the total amount owed, depending on how many unpaid installments she has. Let say for a client I have every installment in column A (rows 1 to 5), and in column B, I want to add them all. The output should be
Cell B1: "sum(A1:A5)"
Cell B2: "sum(A2:A5)"
Cell B3: "sum(A3:A5)"... and so forth
Since I have many loans, I need a dinamic routine to that sums every installment, where amount of installments vary from client to client. My proposal is (adding from the last installment to the first one):
VB:
months = 4 'an example
For j = 0 To months - 1
initial_row = ActiveCell.Row 'because I run this several times. In this example I am in row 18[code]....
For some reason this is not working, and what I see in Excel after running it is: SUM('AJ18':'AJ18'), which doesn't work.
View 1 Replies
View Related
Aug 14, 2014
how do i put the following as loop. Range("A2) then Range("A4") then Range ("A6) and so on.
View 8 Replies
View Related
Jul 22, 2008
I have a spreadsheet which I need to remove all the blanks from, but instead of shifting cells up (I figured out how to do that in a macro), I want them to shift left.
I understand the basics of for...next loops etc, but I can't seem to understand how to make the selection in a range string variable. Not sure if this is a good explanation!
The code I have so far is....
View 10 Replies
View Related
Feb 13, 2009
I have an excel sheet with set ranges in it. I would like to refer to these ranges in my code, but i am doing something wrong. Here is a portion of the code. The range name is 'Status'
View 4 Replies
View Related
