I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE() ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _ "Table1" Range("Table1[#All]").Select ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5" End Sub
Basically I need a bit of VB to find the last cell in column F with text in it (is it End(xlUp)??) and then apply full borders from that cell up to cell Q5. A test macro tells me the border bit is as follows, so just need defining the range.
I am doing is setting a variable called eof to the number of rows (with text) and i just want to select columns A1 - G1 and the eof range!
Dim eof As Integer With Sheets("Coverage Count (%)") eof = .Range("G65536").End(xlUp).Row 'crashes on the .select .Range("A1:G1" & eof).Select Selection.Sort Key1:=Range("G2"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End With
I've done this before and I could have sworn this worked...but i must be missing something.
I am trying to create a command button on my userform that will allow me to print all the records in the worksheet....in other words it should only print the rows with data......
*my worksheet is called "complaintData" - this is hidden and not active sheet. *I have columns A to J with information, with heading from A1:J1. *I want to be able to print all the rows with values in column A. (Not all the columns except "A", will have values for every record....some may be blank for some records... *I want all the columns to fit in in one page with headings (A1:J1) being first row on every new page..... *page setup should be landscape...
I have tried a few codes from this forum, but not sure where I have goofed up....am still trying learn VBA.....would appreciate if anyone can fix this code for me....cheers
Private Sub cmdPrint_Click() Sheets("ComplaintData").Visible = False Dim ws As Worksheet Set ws = Worksheets("complaintdata")
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
I care about is the line starting wks4.Cells(Di, 2) = I am trying to sum data from a variable length column in worksheet 3 and place the result in column 4 However, when I hit enter after entering the formula into =SUM() I get
Expected: list separator or )
[code] Sub Macro1() Dim wks3 As Worksheet Dim wks4 As Worksheet Set wks3 = Worksheets("Sheet3")
I am using the below code which works perfectly in same sheet. But instead of range a1 and b1 in the same sheet (bold one), i want to use range a1 and b1 of sheet2. Range "Nazim" is named range in sheet1. And this code will be put in sheet1.
Private Sub CommandButton1_Click() Worksheets("Sheet1").Activate Range("A1").Select Selection.End(xlDown).Select ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate ActiveCell.PasteSpecial End Sub it errors to: SELECT METHOD OR RANGE CLASS FAILED
I am trying to run a script from a command button on another sheet in the same workbook. all the variables have been defined. I get a "select method of range class failed" message when I run the code. I believe that i am not getting "closed trades" to be the active worksheet.
excerpt of code
'Clear out existing data iRow = 2 Set wks = ThisWorkbook.Worksheets("Closed Trades") wks.Activate
lrow = Cells(65536, 1).End(xlUp).Row Set Rng = wks.Range(Cells(iRow, 1), Cells(lrow, 17)) ' this row errors out Rng.Clear Set Rng = Nothing
Subcript Out Of Range Error Coming Now For The Code Which Works For Me Before
Dim rRange As Range, rCell As Range Dim strVal As String
Set rRange = Worksheets("WIED PROBLEM WELLS").Range("A11:A110")
For Each rCell In rRange strVal = rCell(1, 3) & rCell(1, 4) & rCell(1, 5) & rCell(1, 6) & rCell(1, 7) & rCell(1, 9) rCell.EntireRow.Hidden = strVal = vbNullString Next rCell
i am using the code above to hide the rows which doesn't have any values in all the following Cells 3,4,5,6,7 & 9 or Unhide the rows if there is value in any 1 of the following cells 3,4,5,6,7 & 9 from row number A11 to A110.
The same code works for me before. But now the code is not working. It says below the error message
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.
I am trying to run some code when a worksheet is selected.
I'm doing this using a macro currently (code below), but this requires that i use a quick menu button and i would like to make it a form button and assign a macro to it (so i can distribute the file without everyone having to create a menu button).
I would like to replace (or modify) the code below to select any sheet other than the ones named "a" and "b".
Code: Sub ImportAlarms() Dim thisSheet As Worksheet Dim targetSheet As Worksheet
On Error GoTo failed
Set thisSheet = Application.ActiveSheet Set targetSheet = Sheets(TARGET_SHEET)
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
how to select a cell in opposite (i.e right side of a range) while using a macro. My macro selects a certain range based on user input. The active cell is the left most upper cell. I need to move the active cell within the range to the right upper most cell. I tried the short cut key - tab, while recording a macro, but the macro just selcted a that certain cell.