I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
I think the problem is the order in which I have the "next" loops. I would like to evaluate the if statement below over a range of cells
Sub Analysis()
Dim i As Integer
Dim x As Integer
Dim y As Integer
Dim k As Integer
Dim TheLast As Integer
TheLast = Sheets("Name").Range("c" & Rows.Count).End(xlUp).Row
For i = -7 To -26 Step -1
For x = 24 To 43
For y = 14 To 43
For k = 16 To TheLast.................
I have the following loop that should look through my rows of data for the Value "Y" in column T, for those rows that contain "Y" it should update column K with the variable xdate. For some reason it doesn't seem to work, it changes the first entry it finds and then seems to crash, I have to use CTRL+BREAK to stop it.
View 3 Replies View Relatedhow to get my LINEST function to work properly. Now, what I'd like to do is have it reduce or increase the order of the polynomial until R^2 equals 1.0, or the polynomial reaches 6th order, whichever comes first.
Can I do this with a bunch of nested IF ELSEIF statements, or is there a cleaner way to do this?
I have a code like this below
Sub Copydata()
Dim emre As Integer
For emre = 100 To 121
Sheets("CP TB").Select
ActiveSheet.Range("$B$8:$G$10000").AutoFilter Field:=3, Criteria1:=emre
Range("E8:F8").Select
[Code] .....
I want to skip values when the selection is a value I choose. I tried to put a "If" statement but I couldn't make it work.
The IF statement will check the selection after red colored code. if cell value is "a" then it will go for Next emre.
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
I have the following code which previously was showing an error on the Do While line. It was suggested that I change the line too Range("B2").Text. However, the loop is not deleting the rows based on "#N/A". Can anyone offer any suggestions?
Selection.Sort Key1:=Range("B2"), Order1:=xlAscending, Header:=xlGuess .....
So here is my problem:
how do you repeat a write statement four time
form 1234 to 1234123412341234
If ComboBox1.Text = " Market 1" Then
StoreNumList = Array ("66", "67", "107", "222") 'obviously array string is much longer than this
For x = LBound(StoreNumList) To UBound (StoreNumList)
StoreNum = StoreNumList(x)
ComboBox1.value = StoreNum
Call btnOK_Click_Process
Next x
Program runs fine first step through. It calls the btnOK_Click_Process sub routine just fine. However on second and subsequent For/Next cycles it does not call btnOK_Click_Process.
I am having an issue getting an IF statement to work inside a DO loop. I have Microsoft Excel 2007 and Windows 7 Entreprise.
In my Excel spreadsheet, I have in column B a list of keywords and in column C the category to which each keyword belongs. For instance, the keyword "boot" goes withe the category "Shoes", "scarf" goes in "Accessories", etc.
In another column, I have a list of product descriptions (like "Black Boots" or "Silk Scarf") and I would like to assign the relevant category to each product. I thought to do this by creating a new function in VBA. This function would go through the whole list of keywords in column B, checking if the keyword is included in the product description. If it is, the function's result would be the relevant category, and if it is not, the function would search the next line in column B, until a relevant keyword is found, or until the end of the list.
Here is the code I have written so far:
Code:
Function SegmentSearch(Item)
Dim i As Integer
i = 1
Do
i = i + 1
If Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE" Then SegmentSearch = Cells(i, 3)
Loop Until Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE"
End Function
Without the loop, the function works fine (if "Item" happens to include the first keyword in the list) but as soon as I try putting the loop I get a #VALUE! error.
My nested loop works as intended without If statements, ie it counts non blank cells in a series of 17 ranges (this loop is called the CountRangesOnEachRow loop) AND then drops down a row and repeats (this loop is called the RowNo loop). The problem is that once my first If statement occurs the RowNo loop fails and it stops at the first row.
The first If statement is designed to do the following:
1. Tests to see if A4 has data. If yes, copy cell contents (pupil's name) to Sheet(2).Range("StudentName")
2. If empty skip the countranges loop and move down a row to A5.
3. Cells A4:A35 need to be tested for data in this manner.
I've included a sample workbook & code with the IF statement comment blocked so you can see what it should do AFTER it tests the A column for data. The macro should end after row 6 as A6:A35 are all blank.
Setting value in For Each statement stars infinite loop. I am trying to get the following script to work
View 2 Replies View RelatedI have a worksheet built that obtains info from Sheet1(ACV) and enters it into Sheet2(Payment1), however when I run the process, only Line 10 fills and then it stops. I need to loop the first statement of the code, so that it fills all of column 1 until there is no info to fill then I assume the rest of the code will fill in the worksheet accordingly.
View 3 Replies View RelatedThis is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies View RelatedNeed all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies View RelatedI have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies View RelatedI'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies View RelatedIf C36, C37, C38 or C39 contain a 0 then put 0 if not continue with the the formulae
I have this but I know its not right as this is a sum: =IF(C36:C39=0,0,ROUNDUP((C36/C37)+(C38/C39),0)).
I've created an IF statement with multiple formulas, but I can't seem to
figure out if it is possible to pull the information by a specific date
range. I have sales reps that visit customers on specific dates and I need
my tally sheet to only pull dates within that current week. Does anyone know
if this is possible??
This is what I have so far:
=SUM(IF(sales rep!AB2:AB216=I3,IF(sales rep!$AA$2:$AA$216=I4,IF(sales
rep!P2:P216=I7,IF(sales rep!$N$2:$N$216>=DATEVALUE("3/18/2005"),1,0)))))
If you look above I have it to calculate the date value starting at
03-18-05, but I would like it to only pull that date through the next week.
I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
I am trying to use cell C6 in my control sheet
Which is this
C:UsersNeilWin7DBTradingETFfiles
And put as a string into SaveAs
wbNew.SaveAs Filename:=Worksheets("Control Sheet").Range("C6") & TickerIndex & "ProSharesNAVRatio" & ".txt", FileFormat:=xlTextWindows
I'm trying to put together a SumIfs formula to find the total count of procedure codes during a certain time period, for a given market.
I have the Market column, Procedure Code column, Date column, and count of Procedure Codes column.
The range of Procedure Codes I want to total on are in cells C4:F4 and they are:
99307993089930999310
It's fairly straightforward with the dates in the SumIfs as well as markets, but I'm not able to get the range of Procedure codes to work like I want. These 4 codes are just the criteria that will use to pull the totals from, which comes from a much larger dataset.
