Command button opens userform with a listbox. Unfortunately during testing I found that if a value is not selected from the listbox and the OK button is clicked, it bugs out.
Is there a way to force a cell value from the listbox? BTW, the listbox first number is 3 so it would be my choice of default.
I would imagine the code would need to be with the OK button, so here is the code for it:
the way my spreadsheet's set up so far is that each employee should have a goal of, say, 100 for how many people they need to sign up. But they each have specific geographic breakdowns in their turf, some of which might be bigger or smaller than others, but at the end should all add up to 100 for each employee.
It's not super hard to do since I just take a goal of 100, in this example, and multiply it by the percent of population of the area in their overall assignment and give them a goal for that area based on that. So if Philadelphia has 70% of their total population, Upper Darby has 20% of their total population, and Phoenixville has 10% of their total population -- the goals would come out like this:
Philadelphia, Goal: 70
Upper Darby, Goal: 20
Phoenixville, Goal: 10
Ryan, Total Goal: 100
For some of the employees, that works out perfectly -- but based on the population sizes, the rounding sometimes gets a little off and it could end up like this:
Philadelphia, Goal: 71
Upper Darby, Goal: 19
Phoenixville, Goal: 11
Ryan, Total Goal: 101
For most employees, it ends up being dead-on 100 -- but there are some whose totals are at 98 or 99 or 101, and I was wondering if there was a way to force it to shave a point off or add a point on somewhere, pending on how close the decimal was when it rounded to make sure that it always ends up exactly on 100. (I'm using 'Data >> Subtotals' to get what's being represented above as "Ryan, Total Goal.")
Is it possible to lock a cell so that the user must enter the number manually as opposed to using a formula.
There is a cell on one of our spreadsheets that the user should be hand entering the numbers from the general ledger this is done to ensure that the general ledger balance is the same as the spreadsheets totals. However most of the user insert a formula that just copies the number from above into this cell that should be hand entered.
I have the following formula:
View 2 Replies View RelatedI'm importing data from CMS into excel and I then have several other sheets that harvest the raw data from the import and use it to calculate various things.
My problem is that when I import time data, if it is less than 1 hour (eg 39mins, 12 secs) it will format as :39:12 rather than 00:39:12 and for some reason the calculations in other sheets omit any data that does not contain the hours field.
I have tried formatting the cells as hh:mm:ss but this does not force inclusion of the hours field.
I guess what I'm asking is:
1. Is there a way of making excel include both data in the hh:mm:ss format and :mm:ss format in the calculation?
or
2. Is there a way of forcing data in the :mm:ss format to include an hours field populated by zeros?
I want to have a fullscreen application all the time, so for this I've added to things in my code:
1) Application.DisplayFullScreen = True in Workbook_Open
2) Same in WorkBook_WindowsResize
I open my workbook, it goes fullscreen. Until now all OK. However, if I press ESC or doubleclick on the topbar, it goes out of it.
Now the weird thing: if I click the "Restore window" button (which is right under the application maximize button that incidentally I have disabled) it snaps on fullscreen and THEN it keeps this state forever, even on ESC/doubleclick. Which is what I want.
So my question is: what does exiting from fullscreen and going back in change so that the workbook event starts triggering, and how I can replicate it programmatically? I've already tried WindowState = xlNormal followed by xlMaximize, it doesn't change anything.
recently excel 2003 began forcing the save as dialogue box when i try to close the workbook. I do not remember installing anything in particular on my machine when it started acting up.
I tried uninstalling office with Revo Uninstaller (gets rid of those pesky registry entries that the control panel add/remove leaves behind).
I reinstalled and I have the same issue.
Im thinking it is a macro of some sort as when I open the program holding down shift, it does not prompt me to save as when I exit. I do have one excel add in installed, but I have used it for many years without any issues.
I have created a scorecard and I have certain fields which i need completed prior to the coach submitting the scorecard.
Is there a way which i can prompt the coach if they miss a field
The fields i want completed are:
X17, Y17, Z17, AA17, AB17, AC17, AD17 and AF17
I do not write code in it, just use it for school and work on the most basic levels. I am trying to suck an Excel document into SPSS ( Statistical Package for Social Science) for my Engineering internship. I am logging temperature using Omega Engineering, Inc temperature probes. When converting the data recorded on the probe to excel, it does something funny. I will try my best to explain what it is doing. If you format the cell to general, it gives you this (38917). Then simply changing the format to date I get this (7/19). How do I change this to make it so the date is the only memory in the cell. I don't need the other number in there because when I suck it into SPSS it only sees the 38917 number and not the date. I need the date to do my statistical analysis on the data.
View 4 Replies View RelatedI am working on a project from work and am having trouble with formatting the final version that is sent to customer.
We have one tab that is named "initial" where all of the information such as Serial number, connection type, etc. is entered.
We have another tab, named "final", that is automatically populated with this information. This final tab is locked from the end user.
Once the user finishes entering data into the "initial" tab they delete the rows below that are not used. Because these rows are now deleted the "final" sheet shows "#REF!" for all of these cells.
I have attached some screen shots as examples.
I would like to be able to put some logic in the formula to make the output on the "final" tab match the initial tab. Ideally, when the user deletes the rows that are not used on the "initial" tabs this controls the amount of rows seen on the "final" tab and we don't have all of the #REF! symbols.
Let's say my horizontal scrollbar is 2/3 of the way to the right and I'm currently viewing columns EA thru EZ. If I turn on VBA macro recording, the Excel auto-generated VBA macro code that gets saved when I press Ctrl-Home is Range("xx").Select, where "xx" upper-left-most cell based on frozen panes [e.g. Range("T3").Select]. While recording the macro, when I press Ctrl-Home my Excel view horizontally scrolls all the way to the left such that cell T3 is selected such that I'm now viewing columns T thru AS (which is what I want). If I start with the horizontal scrollbar 2/3 of the way to the right again and I use Range("T3").Select in a VBA macro, cell T3 gets selected like before -- but Excel doesn't horizontally scroll all the way to the left to where I would be viewing columns T thru AS; it just stays with columns EA thru EZ in view. Is there some way to force the horizontal scrollbar all the way to the left with VBA code? I tried searching the FAQ and didn't find anything there. I'm using Excel 2007 on a Windows7 PC.
View 2 Replies View RelatedI am using the below code to force a range of cells to change to Upper Case, what i am after is an exception to the rule for example the words Pick Up i don't want to force to upper case, is there VBA i can add to the below to achieve this?
Private Sub Worksheet_Change(ByVal Target As Range)
''''''''''''''''''''''
'Forces text to UPPER
''''''''''''''''''''''
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("w6:w299")) Is Nothing Then
Application.EnableEvents = False
Target = UCase(Target)
Application.EnableEvents = True
End If
On Error GoTo 0
End Sub
In a multi sheet workbook (Excel 2007), could some one tell me how to force sheet 'Main' to be displayed?
View 2 Replies View RelatedIs there Code for forcing all text in a certain range to Uppercase?
Example: A1:E20
if possible I need the code to be just inserted into the sheet code. Maybe were when the user moves to another cell it changes them then.
i would like to put a command button on one Excel sheet that will force the formulas in another Sheet within the same file to be recalculated. I know how to put a command button, and i know some VBA. So can anyone give me a hint how this might work?
View 9 Replies View RelatedI have written a custom function which is called in lots of cells. It had an error so I modified it. But the modification did not automatically trigger recalculation in the cells where it is used. Neither did F9 (manual recalculation). The only thing that did is hitting F2 for the cell then ENTER. But what a pain to do that for every cell it's used.
View 5 Replies View RelatedI am wondering if there is any way to "force" a number to have three decimal places instead of two and still have that number valued as a number for use in formulas later (like AVERAGE, etc.).
What I have is a combination of HLOOKUPs, IF statements, and Conditional Formatting.
I have a Master Grades sheet and individual Class sheets. I use an HLOOKUP, matching a Student Number in both sheets, and looking in the Class sheet for the P/F indicator. If the indicator is a F, the HLOOKUP is to return the Final Grade from the Class sheet and input that into the Master Grades sheet, forced to three decimal places (whereas the numbers in the Class sheets are at two decimal places) If the indicator is P, the HLOOKUP simply returns the Final Grade from the Class sheet and inputs it into the Master Grades sheet with two decimal places.
I have the failure grades forced to three decimal places so that the Conditional Formatting in the Master Grades sheet highlights the failed grades for teachers and anyone else can see right away that a student failed, but the number still allows the Master Grades sheet to calculate the overall AVERAGE for the student as well as the AVERAGE for that class.
If any of this is not quite clear, please ask and I can further expand on what I am doing.
Here is the code I have right now that is not working correctly (and I know why it's not): ....
I have a advanced filter that works pretty much close to how I want it to. However I would like it to either cancel the new filter or copy everything if it finds 0 matches.
If the copied location is blank it breaks my sheet. So I need to find a way for it to never be blank, either by canceling it, copying everything, or finding some other way I haven't thought of.
Also for some reason my Advanced Filter does NOT Ignore blank "OR" cells. If I place a word in the top cell, then leave the bottom blank, it searches for the top cell or anything and I end up with everything. Its quite frustrating.
I want to force my user to input a date in a userform. I have a normal Textbox and assumed i'd be able to set the properties to mean that imput had to be an integer and the format had to be "00/00/00" but I can't see how to do this.
View 9 Replies View RelatedI need to have all of my number be "x10^-6", but Excel wants to make them, for instance, 7.66x10^-3, when I need it to read "7660x10^-6". How can I force excel to do this?
View 3 Replies View RelatedI have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedI have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I have 2 userforms. UF1 and UF2. UF2 has a rowsource set to its Listbox. UF1 has a search function that searches the original sheet. Now I want to double click on an entry in UF1's Listbox and select the same entry in UF2's Listbox. I want to then work with that entry in UF2.
[Code].....
I do all of this to circumvent Excels restriction. I can't search in a rowsource Listbox, but any edits done to my new Listbox wouldn't be made to the Excel sheet.
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
i have a userform listbox, i want the value selected to show up on my worksheet in cell B1.
View 2 Replies View RelatedCan a listbox be loaded with the value of a cell?
View 7 Replies View RelatedI have many values in Columns I and J in one table. The value in each Column I is a worksheet name (in this case "Hello"). My question is how do I copy the values in Range A10 to Z10 from Worksheet "Hello"? I want to stuff all the read values into a listbox. The listbox part is done though. Just the copying part is the problem.
View 9 Replies View RelatedI have created a userform ("frmNQMRecorder") that links to a worksheet called "database" that has a listing of names and other details. Each person is on a new row. On the userform the combobox "cboRiderName" is used to select the name from the "database" sheet and then there is a listbox "lstNQMMeetings" which has a number of radio buttons for the user to select from.
I have managed to use other ozgrid forum answers to have the data write to a new worksheet, adding each entry to the next available line, however this is becoming very large and is not easy to read as the names are not in any particular order.
What I would like to happen is that the value selected in the list box is transfered to the next available cell to the right of the persons name on the "database" worksheet, thus keeping all the data on one worksheet and linked with each person.