I have a sheet that has Date in a column that colunn is formated as DD-MMM-YY, I have defined a named range which has 3 columns including the date.
I have used the following code to read the 3 columns into a list box.
dataarray = Workbooks(wbn).Worksheets(wsn).Range("data")
Me.ListBox1.List() = dataarray
When the data is displayed in the list box get the MM/D/YY format is there an easy way around this.
How do I force the Date and Time format when I import data into an Array that is listed in a listbox?
The desired format is YYYY/MM/DD hh:mm and I do not want to be dependant on the system settings.
I've attached a picture of how my userform is set up - all of the code is working fine and does very dandy, even if I do say so myself, but as you can see when I load data into the listbox, the date on the left hand side becomes M/DD/YYYY whereas I want it as DD/MM/YYYY.
All of the columns except Due Dateconsist of text/numbers and these load fine however even if I change the format of the Due Date data within the worksheet before loading it in it still loads incorrectly. Is there any way to format the date to how I want it within the ListBox?
Is it possible to add a format to a column in a userform listbox. I need a numberformat in the first column in the listbox. The format is 000-000-00.
View 3 Replies View RelatedIs it possible to populate a userform multi column list box with data within a worksheet cell(s) that are underlined?
Ex Worksheet:
ABC
BlastingGLSubsidence
LISTBOX (only show the underlined cells)
Blasting
Subsidence
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have a listbox that lists some items from a spreadsheet, but what I cannot figure out is how to have the font color of the items be RED if the value if negative, and default BLACK when positive...
how to alter the code to accommodate this?
VB:
With UserForm1.ListBox4
.ColumnCount = 5
.ColumnWidths = "2 cm;3 cm;3 cm; 3 cm; 3 cm" [code].....
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedEvery month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedI have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
View 2 Replies View RelatedExample......
In D2 I have: =B2
In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
How we can convert any data which is in General format in to date format.For ex I've:
19/03/2012 14:57 (General format)
I want the output/result
19-Mar
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I have a list details in ranges "CV:DC" column CV has date entries so with the code given above i just select the date from combo box and check the details by pressing command button..Actually this code is doesn't work with combo box but it works with textbox except date data entries in
this mode.
So how can i improve this option if im going to use it in combo box.
Private Sub CommandButton26_Click()
Dim a, i As Long, ii As Long, b(), n As Long
ListBox4.Clear
With ComboBox6
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "Bad Data"
Exit Sub
End If
a = Range("cv1", Range("c" & Rows.Count).End(xlUp)).Resize(, 8).Value
For i = 1 To UBound(a, 1)........................
the following code populates a 9 column listbox in a userform. Me.ListBox1.List = Sheets("temp"). Range("A1"). CurrentRegion.Value.
The first column of the listbox contains a date and this is where my problem lies. The date formatting from the "temp" sheet is not being maintained when the listbox is populated. Can I run a loop or something to scan down the first column of the listbox and if the entry is numeric convert it to the date format "dd-mmm-yyyy", at the moment it seems to be using the date format "mm-dd-yyyy". Also, is there a way to autofit the columns of the listbox?
I am trying to populate a listbox in a userform with only certain data. Currently I am able to populate all rows in a worksheet but I need to have only rows with the current date to show. In col A is the date and col B is a persons name.
View 3 Replies View RelatedI have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies View RelatedIn one excel file, i have a date , and i set this to "dd/mm/yy hh::mm am/pm" format. From another file i will open this file and i need to copy that date to this file. My question is , before copying i need to check it is in the "dd/mm/yy hh::mm am/pm" format using vba.
View 9 Replies View RelatedI would like to format my cells containg date from any format to the format dd-mm-yy. I was doing this manually with the below function
=TEXT(YEAR(Q2),0)&"-"&(RIGHT("0"&TEXT(MONTH(Q2),0),2))&"-"&(RIGHT("0"&TEXT(DAY(Q2),0),2)).
I would like to automate this using vba. i tried a bit but doesn't get what i want. ultimately i want the date in text(dd-mm-yy) format.
How do I change a date "10/01/2004" into a format like 20041001? I used concatenate(right(A1,4),left(A1,2),mid(A1,4,2)) but the function takes the serial value of the date as an argument and concatenates that . So I get a different value.How can I get away with it?
View 9 Replies View RelatedI have been advised to use this code to search for my spreadsheet for dates
Sub FilterTo1Criteria()
With Sheet1
.AutoFilterMode = False
. Range("a1:d1"). AutoFilter
.Range("a1:d1").AutoFilter Field:=2, Criteria1:={date entered here]
End With
End Sub
It works but i have two problems
1:Instead of typing the date I want to be able to type a date into a textbox in a userform, is this possible?
2: How would I then go about inputting this data into a list box in a userform?