In one excel file, i have a date , and i set this to "dd/mm/yy hh::mm am/pm" format. From another file i will open this file and i need to copy that date to this file. My question is , before copying i need to check it is in the "dd/mm/yy hh::mm am/pm" format using vba.
View 9 RepliesI have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedEvery month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedI have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
View 2 Replies View RelatedExample......
In D2 I have: =B2
In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
How we can convert any data which is in General format in to date format.For ex I've:
19/03/2012 14:57 (General format)
I want the output/result
19-Mar
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I would like to format my cells containg date from any format to the format dd-mm-yy. I was doing this manually with the below function
=TEXT(YEAR(Q2),0)&"-"&(RIGHT("0"&TEXT(MONTH(Q2),0),2))&"-"&(RIGHT("0"&TEXT(DAY(Q2),0),2)).
I would like to automate this using vba. i tried a bit but doesn't get what i want. ultimately i want the date in text(dd-mm-yy) format.
How do I change a date "10/01/2004" into a format like 20041001? I used concatenate(right(A1,4),left(A1,2),mid(A1,4,2)) but the function takes the serial value of the date as an argument and concatenates that . So I get a different value.How can I get away with it?
View 9 Replies View RelatedCheck and format some data. I have 100,000+ rows so kinda need a macro to do it.
I have data like this
Sheet1 Â ABCDEFG1start_date start_time end_date end_timeTypeSOC Before SOC After
208/01/201218:36:2008/01/201218:40:00TÂ Â 308/01/201218:45:1208/01/201218:50:44TÂ Â
408/01/201218:52:1208/01/201219:50:46C3446508/01/201219:54:2708/01/201221:44:40C
[Code] .....
I'm trying to merge all the "C" rows in Column F into one row, like this:
Sheet1 Â ABCDEFG14start_date start_time end_date end_timeTypeSOC Before SOC After
1508/01/201218:36:2008/01/201218:40:00TÂ Â 1608/01/201218:45:1208/01/201218:50:44TÂ Â
1708/01/201218:52:1208/01/201223:02:00C341001809/01/201208:16:5109/01/201208:44:08TÂ Â
1909/01/201208:45:1109/01/201208:49:55TÂ Â
So you would just keep the first row,but replace the 'end date' and 'end time' with the 'end date' and 'end time' from the last row and same with the SOC.
I am trying to improve my expense report template and need to check on the load if expense report number has been loaded correctly as well as if this report has been previously loaded. Expense report number format looks like this: AAA-BBBBBB-CC
Where:
AAA – Employee ID #
BBBBBB – End of the week date
CC – Weekly expense report number
For instance, 023-122008-01 means: Employee number 023, week ending date 12/20/2008, weekly expense report number 01. I would like to prevent/give warning of loading incorrect expense report number format, check for possible duplicates, and check if trying to load expense report belongs to the right person (by simply matching previously loaded in different cell of the same sheet employee ID and first three digits of just loaded expense report number. I think I know how to do all of these separate, but have no idea how to combine all three checks for one cell.
What would be the correct formula to check the format of an address that must start with a number followed by a space then text - in cell B4
At the moment I have:
=IF(B4="","r",IF(ISERROR(SEARCH(" ",B4,1)),"r",IF(ISNUMBER(VALUE(LEFT(C5,SEARCH(" ",C5,1)-1))),"a","r")))
If it is incorrect or missing an 'r' should be displayed, an 'a' if correct
i will receive same data from two different persons in different format. By right, the data should have the same total. However, it was not.
I have attached a file that contains two worksheets with simple example to illustrate what i meant. May i know which is the effective formula to detect the mistake?
I am trying to generate a sub that read the name of a check box (which is in text format) in a spreadsheet in this case sheet13 and according to that ask if that check box which is in another sheet (sheet4) is true or false, I mean if it checked or not, then perform other actions
But I am getting this following error
Run time error ‘438’
Object doesn’t support this property or method
I tried several things but always get an error.
Does some body know how to make the checkboxname variable a valid name for the checkbox object in sheet4?
format a cell depending on the state of a check(tick) box
View 3 Replies View RelatedI have a worksheet that I want to format based on three different cells. I had it set up with the following:
Code:
For i = 2 To LR
If Cells(i, 13).Value = "Price Mismatch" Then
Cells(i, 1).EntireRow.Interior.ColorIndex = 39
[Code] ........
Worked fine until one of the cells had an error in the result, I want to have this row colored also. I altered the first check to :
Code:
If Cells(i, 13).Value = "Price Mismatch" Or IsError(Cells(i, 13)) = "True" Then
I have tried multiple variations without success. I need to have the row colored if the value in the cell on the row in column 13 = Price Mismatch or is an error.
I have employee numbers in two ranges of cells where the employee number will have alpha and numeric (ASAZ002000). The first is a range of “target” employees we need to look at.(A4:A20). The second range will be all employees of the company that the target list needs to check in for the specific target employee(s).(G4:G25). If a “target” employee is found within the range of all (G4:G25) – highlight cell red (G4:G25). I have attached a small file that might explain it better.
View 2 Replies View RelatedI have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View RelatedHow can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies View RelatedI need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.