In the attached excel sheet you can find 2 subheadings named Safety and Waiting. Like this i have many sub headings in my excel sheets. Each sub heading contains some rows. The below is the code i used to change the Font color based on the date values.
Every thing works fine. My requirement is if any rows added under subheading "Safety" then i want to run the loop from 1 st row to last row under this subheading which will change the color based on the given date.
How to identify under which subheading the row is added and which is first row and which is last row.
Sub CycleThrough()
Dim Counter As Integer
If ActiveCell.Column = 3 And ActiveCell.Row >= 3 And ActiveCell.Row <= 8 Then
For Counter = 3 To 8
If IsDate(Worksheets("Sheet1").Cells(Counter, 3).Value) = True Then
If Date - Worksheets("Sheet1").Cells(Counter, 3).Value >= 100 Then
Worksheets("Sheet1").Cells(Counter, 3).Font.Color = 255
ElseIf (Date - Worksheets("Sheet1").Cells(Counter, 3).Value >= 70) And (Date - Worksheets("Sheet1").Cells(Counter, 3).Value <= 100) Then
Worksheets("Sheet1").Cells(Counter, 3).Font.Color = 82400
ElseIf Date - Worksheets("Sheet1").Cells(Counter, 3).Value < 70 Then.......................................
In MS Excel, I find that when the zoom is dropped to 50% the fonts in the list become unreadable. Is there anyway that the fonts in the list have the ability to have their own formats?
I have a spreadsheet that I use to track my commissions on a monthly basis from about 8 sources. I have been tracking these monthly commissions from each source separately. In my spreadsheet I have a column that shows YTD total for each row(about 50 rows). Every month I have to go into each formula to update it to the corresponding month as follows: "=SUM(B3:J3)" then the next month I have to change it to "=SUM(B3:K3)"
What I would like is if row "B-J" represents Jan.- Sept then on October first it will automatically sum the row "B-K"
I have a monthly calender, with each month on its own sheet. I have a sheet named Holidays, which list the holidays. I have been able to use conditional format and highlight the dates in the months the holidays fall on, but I would like to highlight a range of cells below the date on monthly sheet. I have attached a sample of what I have and would like to achieve. I am not much good at using VBA, but would not be against using it either.
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3 If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3 If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
Not very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.
I am trying to figure out a way to condense my code (improve my code) Right now I am using a Macro in Excel to go through a workbook by selecting each column individually and if there is something in the header then formatting that column as text. The problem with the way I am currently doing it, is that due to size limitations on the VBA code, I can only select columns A to Z, and if there is more data in the worksheet it is not formatted. Also I would like the code to check the header and if the word date is in there, format it as a date instead. Also if there is a way to delete any invalid ranges in the workbook
Sub Format() Dim VarFileName As String Dim VarPath As String Dim VarSavein As String Dim wsheet As Worksheet VarSavein = Sheets("sheet1").Range("C2").Value VarFileName = Sheets("sheet1").Range("A2").Value VarPath = Sheets("sheet1").Range("B2").Value Workbooks.Open VarPath & VarFileName For Each wsheet In ActiveWorkbook.Worksheets Sheets(wsheet.Name).Select Columns("A:A").Select Selection.TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _ TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, _ Semicolon:=False, Comma:=False, Space:=False, Other:=False, FieldInfo _ := Array(1, 2), TrailingMinusNumbers:=True..........................................
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
In D2 I have: =B2 In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I'm trying to have it output certain symbols such as "Ó" and I can't quite figure out how to do it, i want it to basically write in the selected cell:
"Ó of " & a & "'s = " & b
where a and b are strings... my problem is i cant figure out how to have it output the sigma but keep the letters from going into symbol or windings...
I have a chart graphing different series, which includes a legend to label each series. The labels are linked to particular cells in the worksheet.
Most of the chart has Arial font formatting, but I need to change the formatting of a few characters in the legend:
I know that i can change the formatting of the whole legend, and even different entries in the legend. Is it possible to change the font of just a couple of characters in one legend entry?
Elements I need to change are: Font type (eg from arial to symbol) Size (varying from 8 to 14) Bolding etc.
I am using Excel 2003 and have a spreadsheet that lists 1521 fonts. I am using VBA and looping through the list of font names in column 1 and want to put an example of the font in column 2. I am trapping for error 1004 and using Resume Next. This works fine for 480 lines and then it just stops working. No error message or anything. The only thing I could think of is there might be a maximum number of fonts allowed per spreadsheete, but I would have though I would get an error.
I have a very simple workbook in Excel 2000 with one page containing all my data which I update on a daily basis. Some of the data is linked to another workbook so that it updates each time I open it. Then I have 12 tabs, one worksheet for each month of the year with 10 simple graphs on each worksheet.
As you can see, it is a very simple worksheet. Each month, I copy and paste the graphs from the previous month into the current month and simply alter the Source Data in the graph to gather the current month's data. At the start of this month, it allowed me to copy and paste, but when I tried to alter the Source Data to the current month, I got a window on screen with a yellow triangle containing an exclamation mark and the words "No new fonts may be applied to this worksheet". If I click the OK button or the cross, it responds but the whole programme is locked. The only way I can get out is to give the 3 fingered salute and close Excel down.
