Not very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
Calibration Record-example.xls
Looking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.
I have two cells. both formatted to contain dates.
cell a1 will have a date in it. cell a2 will have a date calculated to be cell a1 + 42 days.
now, when cell a2 reaches a date that is greater than cell a1 + 42 i want cell a2 to be formatted as fill red.
so, i have tried a conditional format as =a1+42 >=TODAY() but it always highlights as red even if the value in cell a2 is less than cell a1+42.
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
View 4 Replies View RelatedI have a spreadsheet that keeps track of staff training. in colum A is the date they completed the training. this training expires in 5 years time. i would like the cell to highlight red when the date has expired. and when i enter the new date in 5 yrs time the cell to return to no fill color.
View 8 Replies View RelatedI have a monthly calender, with each month on its own sheet. I have a sheet named Holidays, which list the holidays. I have been able to use conditional format and highlight the dates in the months the holidays fall on, but I would like to highlight a range of cells below the date on monthly sheet. I have attached a sample of what I have and would like to achieve. I am not much good at using VBA, but would not be against using it either.
View 2 Replies View RelatedI need a macro that will highlight a row based on a cell criteria. I have used conditional formatting but there is a lot to format and has dramatically slowed the sheet down. However, I know nothing about macros/vbas.
E.g. If it states JI sent then I want the whole row to be highlighted light green.
App form needed = peach
Waiting list = light blue
Cancelled = red font strikethrough
DNA = purple font strikethrough.
Also - it could well be that in the row it has App form received, JI Sent and DNA all in 1 go. So ideally I would want that row to be highlighted light green with purple font strikethrough.
Booking Status
JI Status
Date JI Sent
Attendance
Cancellation date
Chargable / non chargable Cancellations
Chargeable / non chargeable DNA
Date taken
Time taken
Event Title
Start Date
Time
App form received
JI Sent
[Code] ......
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I have created a drop down box that allows me to choose multiple different Text Options. Example: Cell B4 has dropdown that lets me choose the Text Options, "House", "Car" and "Truck".
Next, I have 5 or so other columns underneath with their own text. What I want to do is have different cells highlight themselves depending on what is in Cell B4.
Example, if "House" is selected in B4, I want cells B7 and B9 to highlight. If "Car" is selected, I want cells B7, B8, and B10 to highlight. If "Truck" is highlighted, I want cells B9-B11 to highlight. Is this possible to do? I've tried using If/Then statements, but those don't seem to work for this type of thing.
I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
I'm trying to do something rather easy (I think). I would like to conditional format a column of historical dates. In this column I would like to highlight the first month of each fiscal year (April).
I'm unsure how to type this in logically into the conditional format formula? (Excel 2007).
I tried "=Month()=4" which does not work. Sometimes I wish we could just use simple algebra to do excel functions! A=Month(x) when A = 4, format cell!
Any ideas?
I want to know if there is any way to highlight a cell that does not contain a whole number. In my spreadsheet I have a formula that calculates the number of packages in an order, but if the result is not a whole number then I want it to be highlighted.
View 4 Replies View RelatedFormula to conditional format to highlight all the dates only showing 2013?
View 3 Replies View Relateddo a conditional format rule that will highlight every other row of my excel spreadsheet when the value in a specific Column (say Column A) differs than the previous.
I've attached a sample worksheet with what I want it to look like after the conditional format rule is applied (every other row highlighted in light blue). The rule needs to apply to all rows in the worksheet beginning with ROW 2 (I don't need the rule to apply to the column header which is in ROW 1).
Two things in Conditional Format, any formula to highlight cells if they are duplicated, but the next set of duplicates in another color? i.e.
If that isn't possible just the formula to highlight A To C would be great
So Cells A1 to C1 (red) and cells F! to I1 (Blue)
A1 500
B1 500
C1 500
D1 500
E1 650
F1 750
G1 750
H1 750
I1 750
I looked around at some date functions and could not find one to work.
I have a sheet that has 365 days. When I load the sheet I want to cell for today to be highlighted in some way..... color or just active.
If date = 05-10-2007 then
BackgroundColor = 17
else
BackgroundColor = 9
end if
I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedI'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another
I've creating a sheet to keep track of quality for my department. What i want excel to do is highlight via conditional format the highest 3 percentages in collum.
Example
85%
90%
91%
99.25%
96%
87%
What i want is to have 99.25%,96, and 91% change to green since they are the highest %
Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
View 8 Replies View RelatedI want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
View 2 Replies View RelatedI have set 3 conditional formatting rules where the row from column A to K will change depending on the value on column L.
Selection is equal to A3:K100, conditions are similar to:
- Formula is =$K3="PIP"
Then for formatting I chose WHITE BOLD FONT & BLUE SOLID PATTERN, for example.
Conditional formatting only allows 3 conditions. If this can be replicated
using VBA, then you can set "n" conditions, correct?
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedHow can I condition format a cell to show no format if the cell contains a date
Please see the attached book1.xlsx for more info. Book1.xlsx
I need conditional format in column Q which highlight in red, any date over 14 days old.
This column also contains texts (non-dates) and these need to be left alone.
I've experimented with a few bits of formula I've found online, but nothing has worked . .
I'm on Excel 2010.
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedMy cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
I need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies View Related