I have a short macro to remove highlighting from certain fields when data is entered. Here is the full
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(ActiveCell, Range("j18:j500")) Is Nothing Then
Sheets("Internal Transfers").Unprotect Password:=""
With Target.Interior
.ColorIndex = 0
.Pattern = xlSolid
End With
Sheets("Internal Transfers").Protect Password:=""
End If
End Sub
The highlighting only goes away if you hit the Enter key after entering data in the cell. If you use the tab key after entering data, or use the mouse to select a new cell, the highlighting change doesn't occur. I have a feeling this might simply be related to the way I'm invoking this event. I've not worked with the worksheet_change event before, but I've read through various explanations and descriptions of this event and it isn't clear to me what I need to do.
I am using this code to hide or unhide rows of text on another sheet:
VB: Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String Dim sValue As String
'Get the address of the cell that changed without '$' signs sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB: If Target.Value = "Not Pursuing" Then ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I want to use the Worksheet SelectionChange event to update part of my worksheet/UI depending on what cell(s) the user has selected.
As an example, if I have two named ranges - $A$1:$B$10 and $C$1:$D$10 - I want to detect whether the user is in range 1, range 2, or neither, then update elements of the UI.
I have 12 named ranges on a sheet, ArrM1 thru ArrM12. Each named range is same size, 6 Rows by 7 columns.
Q. If user selects a cell on sheet that is in one of these ranges, what is code to return name of range? e.g. ArrM1 is cells c10:i15, user selects cell d12; I would like vba to return the name of the range "ArrM1".
Reason, I have the code below so if user selects cell in ArrM1 code is executed, but rather than reproduce code 12 times for each range I thought I could first see where user selects and then change variable for vrange, Set vrange = wksYearlyCalendar.Range("ArrM1") to Set vrange = wksYearlyCalendar.Range("ArrM" & x)
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim CalDaySel As String, CalDateSel As String Dim vrange As Range Dim cell As Range
If Cell "B55" Cell is selected and I want to Select all the above rows to select till Row 1. Selected Row mught change Say B66 or B82 (Dynamic)
Whatever may be the Cell Selected, The result should be The above rows should get seleted. So that I want to delete the rows easily
HTML Code: ws.Range("B55").Select Range(ActiveCell, Activecell.Offset(-55,15)).Select 'This cannot work if the selected Cell is 65, So this should be Dynamic till above Range 1)
I'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.
I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.
The goal of that formula was to return a Date/Time stamp that is fixed and doesn't change over time. The formula is intended to run in which ever cell that I select to enter it into. I named the formula:
=DS
What I am trying to do is create a macro that will run the formula using a hot key function. I want to be able to select a cell and hit CTRL D and have that above formula run in that cell. I have multiple sheets in my workbook and I need the macro to be able to run on any sheet in my workbook. Below is what I have:
Sub DateStamp() ' ' DateStamp Macro
[Code]....
I was trying to apply the macro to only a certain range of cells on any given sheet.
I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value 'If FindRemove = "" Then End
' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select
' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Count > 1 Then Exit Sub Dim i As Long
For i = 1 To 31 If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test() Dim SelectDate As Range Set SelectDate = Range("SelectedDate") If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _ "Jan" ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
if it is possible to format a specified range of cells if one cell has a certain value. For example: If anywhere in column A the word cash appears I want to format 4 rows down from "cash" and 6 rows over from "cash" say green and put borders around it.
I have a series of dependent drop lists and a cell which asks for a phone number. I would like if the selection in the previous cell is North America, the format of (111) 111-1111 is chosen. if the user enters the improper format I would like them to be prompt with an error "Improper Format - <Proper Format>", clear contents, and re-select the cell otherwise if valid select the next cell. It would need to strip out the leading 1 incase an international code is entered and also special characters such as "(",")","-","+","_" as well as spaces.
The next problem is that it would have to change format to if another selection is chosen. The other two selections are Australia and Europe. Europe is more difficult of a format as the area codes vary in length. I will be dealing predominantly with Sweden whose area codes even vary. For Australia I would like it to be in the format 011 61 1 1111 1111 where 011 61 will be added even if the user does not enter it (or if not possible prompt with proper format).
The cell asking which continent is G35 and options are "","Australia", "Europe", "North America"
I'm trying to Copy and Insert formulated cells from sheet "Add Entry" range A3:AZ4 to Sheet "January" just above the last row containing data (the Totals line) starting in column B. The cells need to remain the same in cell size and maintain the formulas that are inmbedded within them. I want to be able to do this repeatedly by applying this macro to a button. I would also like (if possible) to alternate the color of these cells in an alternating row fashion.
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:
Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.
I am preparing a model for a client that runs excel 2003. I need to change the format of a range based on the value in a cell (reference cell) that is outside the range to be reformatted.
Reference cell is a named cell with the value calculated with a Match() function, the only possible values are (1, 2, 3).
I need the VBA code to retrieve the reference cell value and apply one of three formats to the range. I believe the code for that part is something like:
Private Sub Format_Font() Set vrange = Range("d63:r63") Set refrange = Names("ind_agentfee").RefersTo Set refrange = Mid(refrange, 2) On Error Resume Next If refrange = 1 Then With vrange.Font .Style = "Comma" .NumberFormat = "_(* #,##0.0_);_(* (#,##0.0);_(* ""-""??_);_(@_)" Else If refrange = 2 Then With vrange.Font .Style = "Comma" .NumberFormat = "_(* #,##0_);_(* (#,##0);_(* ""-""??_);_(@_)" Else .Style = "Percent" End If End Sub
I am having problems getting the proper opening statements and declarations correct and also get an "Else without Then" error with all combination's that I am attempting. I am sure that the code is mess now as I started with a recorded macro then modified it multiple times while researching the web.
conditional format formula that is based on a text range within a cell. In my case, I would like to compare the low and high range when inputted as a number followed by the quotation marks followed by space then hyphen, space then number and ending in quotation marks. The quotation mark is being used to represent inches.
Like this in cell D14: 0.2” - 2.2”
I am using the following condition format formula which works for the strict case above.
HTML =OR(D16<LEFT($D$14,3)+0,D16>MID($D$14,8,3)+0) However, there will be times when users using this spreadsheet may leave out the spaces on either side of the hyphen, or add more than one space between the number and hyphen. Also if additional digits are added, my formula above does not include all the digits in the results. I prefer to leave the quotation marks in...........
I am looking for VB code that will format a range of cells from a number format to a percentage format based on a reference cell. The reference cell is a drop down created from a list validation.
For example: If the reference cell (cell A1) =1 then cell range B2:C4 would be a number format. If A1 = 2 then cell range B2:C4 would be a percentage format.
I have searched for hours trying to find a relevant thread; I know they are out there, maybe I just wasn't typing in the correct search words.
I want to send the value of selected item in texbox , the value format is change by combobox value ..and I want the value is fill on the next column of sheet ( see attached file please)
1. Where there is data in column B 2. Goto first row of data 2. If column J = "Closed" 3. then select Cells from column B to J in that row and colour these cells in red 4. If column J= "Open" 5. the select Celss from column B to J in that row and colour these cells in grey 4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
=============================================================== Sub Colourclosed() Sheets("Risks").Select Dim LastRow As Long Dim i As Long LastRow = Range("B" & Rows.Count).End(xlUp).Row For i = 8 To LastRow If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
I have a macro which I manually have to change the range in order to run the macro, e.g. Set rngData = Range("B4:I12")
rather than having to change the range for each macro, I was wondering if I could run the macro for the highlighted area. I have tried this, but doesn't seem to work.
