Range Copy: Differ Depending On The Active Cell That's Selected
Feb 22, 2009
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this.
The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value
'If FindRemove = "" Then End
' Goes to the start of the Data column
'Sheets("Staff").Select
'Range("B4").Select
' Tests current cell against FindRemove
'Do
'If ActiveCell.Value = FindRemove Then
'Call CopyPerson
'Exit Sub
'Else: ActiveCell.Offset(1, 0).Select
'End If
'Loop Until ActiveCell.Value = ""
'End Sub
View 9 Replies
ADVERTISEMENT
May 30, 2014
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
View 1 Replies
View Related
Feb 3, 2010
I am having issues with this Macro since I have to run it on computers only supporting Excel 2003 and computers with Excel 2007. The Macro in use is as follows:
--------------------------------------------------------------------------------------------------------------------------------
View 9 Replies
View Related
Jan 30, 2010
What I would like to do with the information that I have put together on a different workbook is to reference an Agent (column A), and a time range (Date is in column D) and then copy the row from A to I for each occurrence during that range of dates so we can see how many and what errors have occurred during any range of dates selected. (I will have different people inputting errors at different times so the dates will not be sorted unless they have to be). I want to be able to select different agents/date ranges to be able to get a glance of how that particular agent did during this time frame.
Here is an example of the work sheet where the data is originaly.
[Removed]
Here is an example (in a different workbook) of what the sheet should look like if I was searching errors for Albert Ozier between 1/25/2010 and 1/28/2010.
[Removed]
View 9 Replies
View Related
Aug 13, 2012
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success.
sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g.
if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2
or
if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2
etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
View 3 Replies
View Related
Feb 11, 2009
I have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesn’t seem to work. It copies the information back onto itself
View 5 Replies
View Related
Oct 21, 2009
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies
View Related
Apr 17, 2009
Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies
View Related
Dec 6, 2009
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies
View Related
Dec 27, 2006
I have a drop down lets say in cell A1. Based on what value is selected in A1, the user should see a different set of check boxes. My thought, which may not be the best way to implement this, is to have all the check boxes and depending on the value selected in A1, the check boxes that are relevant should be active or visible, while the unneeded ones are inactive or invisible.
View 9 Replies
View Related
Jul 23, 2013
So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
Here's what I got 'til now:
Private Sub M0016216_Command_Button_Click()
Cells.Find(What:="M0016216", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ActiveCell.Select
[Code] ........
View 3 Replies
View Related
Mar 21, 2009
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
View 9 Replies
View Related
Feb 13, 2008
I know how to select an entire row, but if I want the "row" with active cell to be highlighted when I press enter, or the down arrow key, is there a way to do that (mainly for ease of viewing).
View 9 Replies
View Related
Oct 22, 2008
I have a spreadsheet which shows a matrix in pounds. But I would like to have a reference cell somewhere near the top which will automatically show the conversion to kilos of any selected cell. Is anyone aware of a function which will do this?
For example, one pound equals 0.45359237 kilos.
Cell A1 contains the reference function to the active of selected cell. If I click on B1 which contains 12, cell A1 would automatically show 5.45. If I click on cell C1 which contains 20, cell A1 would automatically show 9.09.
So I’m thinking it would be something like
=SelectedCell/0.45359237 or maybe =ActiveCell/0.45359237
View 2 Replies
View Related
Apr 4, 2013
I have a sheet with a country in it in A1 (validation list).
Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)
I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.
I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..
View 5 Replies
View Related
Jun 8, 2014
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm‎
View 2 Replies
View Related
May 9, 2014
Looking for a macro that will copy a highlighted range to another sheet. I can get an row to move but not 3 rows.
View 5 Replies
View Related
Jun 3, 2014
My VB looks like this at the moment
[Code]....
What I want to do is when a button is clicked, the range of data in columns 2-9 of the active row gets copied. Then a new sheet is created and the data is then pasted to a range in that new sheet.
The VB I have done so far works fine but its specific to a single range - it doesnt take account of the active row.
View 7 Replies
View Related
Sep 6, 2006
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View 6 Replies
View Related
Feb 23, 2007
I have a button on the Players worksheet that has this
Why would it not work?
Range("NewData").Range("B5:B" & Cells(Rows.Count, "B").End(xlUp).Row).Copy
Sheets("Players").Range("A3").PasteSpecial Paste:=xlValues
I am trying to copy Column B starting at B5 down to the last used cell in column B. into the players sheet starting at cell a3.
I try it and it highlights 4 cells and that is it???
Michael
View 9 Replies
View Related
Mar 30, 2009
I have a code that will allow me to copy three worksheets from an open workbook to a new workbook. That works great, but I only need only a selected range from each of these worksheets to be copied (Range A1:AV60). Here is the code I use to select and copy the worksheets, how do I add a range within this code for each worksheet.
Sheets(Array("Req Page 1", "Req Ext 1", "Req Ext 2")).Copy
View 9 Replies
View Related
Sep 13, 2007
I am trying to create a method to select the values of contiguous range selections on excel worksheets.
Users will be making new worksheets in new workbooks out of the data from the old sheets.
Currently users make a selection is and copy it to a new worksheet.
Is it possible to retrieve from the 'clipboard', the values from the associated cells?
And then to parse them into columns in a new worksheet?
Earlier I tried this bit of ( it didnt work )
Sub AddNew()
' for passing highlighted text into the form so that I can pass it
'to a new workbook.
Dim PassData1 As String
Selection.Value = PassData1
Set NewBook = Workbooks.Add
With NewBook
.Title = "xxx"
. SaveAs Filename:="xxx.xls"
End With
Range("A1").Value = PassData1
End Sub
View 9 Replies
View Related
Oct 23, 2009
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
View 2 Replies
View Related
Mar 4, 2010
I also use VBA in a terminal emulation program that I use the following command to 'screen scrape' the current display memory and quickly Save it to a .txt file:
.SaveDisplayMemory "C:File1.txt", rcOverwrite
What I want to do in Excel is, Copy the current selected Range() and Save it to a .txt file.
I know how Save the current Sheet to a .txt file, but can't figure out how to Save just a Range() of cells.
View 9 Replies
View Related
Jul 22, 2014
I am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
View 3 Replies
View Related
Feb 10, 2014
I have 2 worksheets, 1 with a table sorted like this (in a row):
component | start date | end date | assigned to
Second worksheet with a table like a calendar with dates and people (dates in the columns and people in the rows), every component is assigned to each person by dates.
............ | 01/01 | 02/01 | 03/01
---------|----- --|-------|-------
person 1 | comp1 | comp1 | comp2
-------- |--------|-------|-------
person 2 | comp1 | comp1 | comp3
I want the assignment from worksheet 1 to worksheet 2 to be automatically. i will set the start and end date next to the component in the first table and assign it to a person/s and it will be automatically get filled in the second worksheet (the calendar) under the person/s and under the same dates as set in the first worksheet.
You can see a template here: [URL] ........
View 9 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
May 8, 2009
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
View 7 Replies
View Related
Jul 19, 2006
I have two worksheets with the same column. Would like to edit ex. sheet1 A1 and that sheet2 A1 updates automatically by copying just the value, not the reference.
View 9 Replies
View Related
Dec 10, 2012
As seen from my attached file,
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
FormattingHelpExample.xls‎
View 2 Replies
View Related
