Is there a way to format some particular colums so that when i enter my data into the cells i do not have to keep changing the caps lock to uppercase or pressing shift key which slow down my typing as i am not very fast typer.
View 4 RepliesI am trying to make a column of names appear in upper case (the first letter). I know about Upper(). I cant put that formula in this column because the names are typed there, (it would erase formula). How can I do this as well as have them alphabetically ordered?
View 2 Replies View RelatedI need to find a formula that will allow me to format an upperase sentance to sentance format.
I.E. "UPPERCASE SENTENCES SHOULD NO BE FORMATED USING THE ' PROPER' FORMULA."
I need the sentace to format like this:
"Uppercase sentences should no be formated using the 'proper' formula."
and not like this:
"Uppercase Sentences Should No Be Formated Using The 'Proper' Formula."
To ensure correct data entry, I need to ensure that the filled cells in a column are always in Uppercase for example, irrespective of whether they are typed in upper or lower case.
I have found the following code, which seems to work quite well, even though I have the impression that it slowed my workbook down slightly.
I have names that look like this:
SmithJohn and i want to seperate into two cells so it looks like
Cell 1: Smith
Cell 2: John
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View RelatedIs there a way to get Excel to automatically change the first letter into an uppercase when we start a new sentence just like MS Word ?
View 9 Replies View RelatedHow can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies View RelatedI have about 5000 rows with mixed upper & lower case words. I am trying to get only values if all words are upper-case. I have office 2013.
View 12 Replies View RelatedI have created a data entry spreadsheet for staff.
I need to format all data entry field to uppercase.
My question is about determining whether or not a particular letter is uppercase.
I've written code that reads from a text file one character at a time. And I know that the following determines if each character is equal to the letter "a".
Is there a way to find and pull out uppercase letter in a cell..
Example Below!
Sheet7
AB18Micheal Johnson JonesM. J. J.19United States of AmericaU. S. A.20Laugh Out LoudL. O. L.21North Dakota N. D.
Excel tables to the web >> Excel Jeanie HTML 4
I'm Using Windows Xp Home Edition With Sp2 With Excel 2003!
how to tackle this in excel vba using a macro. I want to force the first letter of each cell in Column A to uppercase until it reaches a blank
View 2 Replies View RelatedI am trying to accomplish the following, when i enter a word in column C but in the odd row i want a macro to automatically convert that word to uppercase.
View 2 Replies View RelatedHow to change the lowercase letters to uppercase letters?
While using the userform, for example "name" is entered in the form.
My requirement is the values should reflect as uppercase letters like "NAME"
I am trying to change string values of a name from uppercase to lowercase. The data is layed out as lastname then first name. As an example, I have the following values in column C:
ANDERSON MICHAEL
SMITH SUSAN P
JOHNSON PATRICK
JORDAN MICHAEL R
WOODS TIGER
CLINTON WILLIAM J
I am trying to convert to following (with "," between lastname & firstname):
Anderson, Michael
Smith, Susan P
Johnson, Patrick
Jordan, Michael R
Woods, Tiger
Clinton, William J
I have a start of how I think the code should flow but can't figure out how to do the conversion.
how to make upper case after mark "." (dot), see this below :
sample data
after formula
Tabrani,Ny.yusmaniar
Tabrani,Ny.Yusmaniar
Badu Zai,Tn.surjaah R & Darussamin
Badu Zai,Tn.Surjaah R & Darussamin
Zainal Arifin,Ny.elvyati
Zainal Arifin,Ny.Elvyati
etc..
it's possible with excel code? if could perhaps not macro.
I am looking for a formula that would extract uppercase words from a cell. I have cells containing this kind of sentences:
"FROZEN PRODUCTS;Frozen avocado;FROZEN FISH;SweeT things;"
so I started with this Macro to extract uppercases and punctuation:
Public Function majuscules(zone)
Dim sel As Object
Dim i As Integer
Application.Volatile
For Each sel In zone
[Code] ........
It works pretty well but gives all the uppercases, and what I want is only those of words fully in upper.
Is there a way to tweak this formula so it gives all the uppers that touch another upper.
In the example case, it should return:
"FROZEN PRODUCTS; ;FROZEN FISH; "
The little cherry on the cake would be if it could give me:
"FROZEN PRODUCTS; FROZEN FISH"
I am using the code below to convert all input on the spreadsheet to UPPERCASE. This was working fine until I added a Column that contains dates (Column D is formatted like 03/Mar/2009). So when I type in 03-03 in column D I get: 03/Mar/2009 instead of 03/MAR/2009
Can the code be tweaked to accommodate the dates?
Private Sub Worksheet_Change(ByVal Target As Range)
'Converts ALL input to UPPERCASE
Dim cel As Range
Application.EnableEvents = False
On Error Resume Next
For Each cel In Intersect(Target, Target.SpecialCells(xlCellTypeConstants, xlTextValues))
cel.Value2 = UCase(cel.Value2)
Next cel
Application.EnableEvents = True
End Sub
i have a form that i have 2 fields that need to be capatalized at all times - B6 and G6 I have used this formula to get B6 to work but for the life of me i cant get BOTH to work and the same time.
here is the formula
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Set Target = Range("B6") 'change to your range
If Not IsEmpty(Target) Then
Target = UCase(Target.Text)
End If
End Sub
This is wrekcing my head as I'm sure it can be done with an Array formula and I cant seem to get it sorted -
Say I have 5 Rows of text starting in A2
"A quick word"
"A quick WORD"
"A"
"word"
"WORD"
I need an excel formula to say "False", "False", "False", "False", "TRUE".
All conditions to be met for TRUE are - Word must in uppercase, Uppercase Word must be longer than 1 character, Sentence (i.e. cell) can not contain a space. This is the path I've gone down, but almost certainly incorrect -
=IF( FIND(CHAR(64+COLUMN($A$1:$Z1)),$A$2,1),TRUE,FALSE)
[CTRL+SHIFT+ENTER]
I import a CSV file into Excel where the column title row has column titles that are just one long text string, without any spacing between the words. For example:
CompanySiteDescription
CompanySiteExternalSystemID
IssueNumber
I would like a method (formula or macro) that would add a space-character before each uppercase letter (that's not the first letter in the string or an uppercase letter that directly follows another upper case letter). Thus:
CompanySiteDescription becomes Company Site Description
CompanySiteExternalSystemID becomes Company Site External System ID
IssueNumber becomes Issue Number
Formula that will convert uppercase words longer than three letters, into lowercase. Leaving the rest of the string unchanged?
For example,
Mary and John at IBM thought this was a GREAT OPPORTUNITY. Becomes:
Mary and John at IBM thought this was a great opportunity.
I have also tried using more func's REGEX.SUBSTITUTE but I couldn't get that to work either!
I was using this code in a sheet that contained combo boxes and it worked great. When I redone the sheet a used data validation instead of CB it wold error out.
Code:
Sub savee()
Range("A4:J22").Select
For Each Cell In Selection
If Not Cell.HasFormula Then
Cell.Value = UCase(Cell.Value)
End If
Next Cell
Range("h4").Select
ActiveWorkbook.Save
End Sub
Is there Code for forcing all text in a certain range to Uppercase?
Example: A1:E20
if possible I need the code to be just inserted into the sheet code. Maybe were when the user moves to another cell it changes them then.
I would like a data validation list to only accept an uppercase Y or N from the dropdown in a cell, but users can type a lowercase Ys and Ns and they are accepted. I would like the cell to only accept the uppercase Ys and Ns from the dropdown. Does this require code or is there a simpler way?
View 5 Replies View RelatedI need to ensure that all text entered into columns G,J,K and L of a specific spreadsheet are all UPPER CASE.
Someone pointed me to this link VBA TO CONVERT TEXT TO UPPERCASE which does it for the full sheet but I need column specific. I am using Excel 2010
Is there a way to get Excel to automatically change the first letter of single word entry to lowercase in each cell of the first row of my worksheet leaving the case the same for all other letters?
View 5 Replies View RelatedI have a list generator that creates a set of data in a multi-column & row dataset. I would like a formula to create a list of the alpha data points only which excludes blanks and any errors.
Example:
AADD
#N/A
BB23EEFF
#N/A
#N/A12GG
CC
Results:
AA
BB
CC
DD
EE
FF
GG
Is it possible to change the contents of a cell (A1) displaying a name as:
John Smith
to Smith, John (in cell B1)